Relion 650 General specifications

Transcription

1 SAMPLE SPECIFICATION S Relin 650 General specificatins The IED shall supprt the fllwing cmmunicatin and time synchrnizatin ptins: IEC including GOOSE and client-server MMS cmmunicatin, with the pssibility f changing frm Editin 1 t Editin 2, r vice versa. MMS cmmunicatin shall be supprted fr up t eight different clients GOOSE, MMS, SV and FST shall be available n every Ethernet prt n the IED, with the pssibility f enabling r disabling each f them by a parameter setting IEC LE prcess bus, with the pssibility f mixing cnventinal analg channels with IEC LE in the same device; if a 9-2LE stream is lst, the IED shall blck the functins dependent n the lst stream, while all ther functins dependent n streams that are still available shall remain in peratin. IEC parallel redundancy prtcl (PRP) with zer secnds recvery time in case f cmmunicatin failure; PRP shall be supprted fr the engineering tl, MMS, GOOSE, DNP3.0, FTP, SNTP, and PTP services. IEC high-availability seamless redundancy (HSR) shall be supprted fr the engineering tl, MMS, GOOSE, DNP3.0, FTP, SNTP, and PTP services. IEC cmmunicatin prtcl DNP 3.0 cmmunicatin prtcl SPA cmmunicatin prtcl LON cmmunicatin prtcl The IED shall supprt IEC , and prvide a full NERC-CIP level 5 cybersecurity cmpliance, including: user authrity and passwrd management centralized user authrity and passwrd management supprt cybersecurity-related lgged events (user lgin; lgin unsuccessful; passwrd changes, etc.) The IED shall include the IEEE /IEC precisin time prtcl (PTP), and the pssibility f being synchrnized by a master clck, r f acting as a master clck, and shall als be able t serve as an IEEE /IEC bundary r transparent clck. Time-synchrnizatin thrugh GPS, SNTP, DNP 3.0, IEC , IRIG-B, r PPS The IED shall be capable f serving as a SNTP server. The IED shall have an Ethernet interface fr cmmunicatin with the engineering tl. The IED shall supprt the fllwing cmmunicatin interfaces: An RJ-45 Ethernet interface n the frnt LHMI f the IED that can be used t cnnect the sftware engineering tl, and als supprt DHCP and the IEC standard. 1MRG C 1/5

2 Up t fur Ethernet interfaces accrding t IEEE 802.3u 100BASE-FX r IEEE 802.3u 100BASE-TX with 100 Mbit/s cmmunicatin speed, freely cnfigurable fr single r redundant (HSR r PRP) cmmunicatin fr any prtcl via Ethernet; It shall be pssible t cnnect the sftware engineering tl t the IED via the mentined Ethernet channels; the cnnectr fr each prt shall be selectable between ptical cnnectr, r cnnectr type RJ45. A serial cmmunicatin interface used fr SPA, IEC and DNP3.0; this mdule shall be ptical, supprting glass fiber: 62.5/125 mm r 1 mm plastic fiber. An ptical cmmunicatin mdule used fr LON; this mdule shall be ptical, supprting glass fiber: 62.5/125 mm r 1 mm plastic fiber. A galvanic RS485 cmmunicatin mdule with cmmunicatin speed f bauds shall supprt a RS ple cnnectr, r sft grund 2-ple cnnectr. The lcal HMI f the IED shall meet the fllwing criteria: A graphical display capable f shwing a user-defined, single-line diagram and prvide an interface fr cntrlling switchgear; the graphical display shall have up t 12 different pages, used fr mnitring and cntrlling ne r several bays, r fr custmized functinality like displaying measurements. A graphical display capable f shwing virtual push-buttns and dynamic texts linked t the internal lgic f the IED. A backlit HMI t ensure readability under dark cnditins. Navigatin buttns, virtual keybard and cnfigurable cmmand buttns; the cmmand buttns shall be freely cnfigurable fr shrtcuts in the HMI tree, r fr simple cmmands. User-defined dynamic three-clr LEDs fr indicatins and alarms; the IED shall be capable f cnfiguring up t 135 different LED indicatins. Ethernet cmmunicatin prt fr cmmissining and test purpses. Access t the varius menus thrugh the LMHI shall be prtectable by passwrd. Cntrl f the primary apparatus using a tw-step select perate cmmand. The IED shall be able t display the fllwing quantities n the LHMI and n the substatin autmatin system: Measured vltages, currents, frequency, active, reactive and apparent pwer and pwer factr. Measured analg values frm merging units. Primary phasrs Psitive, negative and zer sequence currents and vltages. Pulse cunters The IED shall have the fllwing mnitring capabilities: Disturbance recrder with disturbance reprt: nn-vlatile memry capable f string up t 100 disturbance recrdings 40 analg channels (30 physical and 10 derived) with 1000 Hz sampling rate fr 50 Hz systems and 1200 Hz sampling rate fr 60 Hz systems 352 binary channels disturbance recrder shall have a pst-fault retriggering ptin recrdings shall be stred in the device in COMTRADE frmat Event list fr 1,000 prcess events and 2,048 security events. 1MRG C 2/5

3 Event and trip value recrders. Self-supervisin with an internal event list functin; the IED shall be capable f flagging errr signals frm time synchrnizatin and individual errr signals frm I/O mdules. Adjustable breaker mnitring shall be capable f handling multiple breaker types; breaker mnitring functin shall cmprise the fllwing: travel time f the CB during pening peratin travel time f the CB during clsing peratin the number f CB peratins CB remaining life f respective phase the number f days CB has been inactive the CB charging time f the the accumulated energy (I y t) based n current samples Temperature and pressure insulatin supervisin fr gas medium fr circuit breakers. Fault lcatr Event cunters Running hur meter Elapsed time integratr with limit transgressin and verflw supervisin. Supervisin f AC input quantities. Limit cunter fr fur independent limits fr binary signals with verflw indicatin. Ethernet access pint diagnstics fr all Ethernet prts n the IED, including diagnstics fr redundant cmmunicatin; Ethernet access pint diagnstics shall be able t indicate denial f service. IEC quality mnitr, detailing the quality f an IEC LE analg channels. The IED shall supprt the fllwing lgic functins: A substantial number f lgic functins that are freely cnfigurable and can be cmbined with the prtectin, cntrl and mnitring functins inside the IED; the lgic functins shall be available in different executin cycles t match thse f prtectin, cntrl and mnitring functins, and shall be: starting and tripping lgic, with settable pulse time and tripping prgram (single-phase, duble-phase r three-phase), and with testing and simulatin capabilities as per IEC basic cnfiguratin functin blcks, such as AND, OR, XOR, INVERTER, TIMER, flip-flp functin blcks, Blean t integer cnversin, and integer t Blean cnversin cmparatr fr integer inputs cmparatr fr real inputs The IED shall be able t supprt the fllwing hardware: Test switch in cnnectin with the IED, including a slutin fr munting the test switch in the same 19 rack as the IED t ensure a clear statin layut. 1/2 x 19 6U height case selected accrding t the required number f I/O mdules, and with up t 12 analg input channels. The pwer supply mdules shall supprt DC vltages ranging frm 24 V DC t 60 V DC, r frm 90 V DC t 250 V DC. 1MRG C 3/5

4 All mdules used in the IED shall be cnfrmal cated. It shall be pssible t chse between cmpressin type and ring-lug type cnnectr types. One f the fllwing munting alternatives shall be available: flush, rack, and wall munting. The water and dust prtectin level shall be accrding t IEC 60529, with at least: frnt IP40 (IP54 with sealing strip) sides, tp and bttm IP40 rear side IP20 - All abve-stated specificatin shall be integrated in ne single IED. - The hardware shall cmply with IEC The manufacturer shall ensure that, if the IED fails while under warranty, a replacement prduct shall be shipped frm the factry within 48 hurs f receiving an rder, withut the need t first return the failed IED. General requirements Manufacturer shall ffer 5 years f warranty. Manufacturer shall ensure that, in the case f failure f the IED while under warranty, a replacement prduct shall be shipped frm the factry within 48 hurs f receiving an rder, and withut the need t first return the failed IED. The IED shall be parametrized and cnfigurable using a single sftware tl, which shall be used fr IEC cnfiguratin, mnitring, disturbance recrdings withdrawing, trubleshting and migratin f the prject file and/r IED cnfiguratin t a newer versin; the sftware tl shall be available free-f-charge. The prduct shall supprt seamless, peridic and easy prduct firmware updates. 1MRG C 4/5

5 l ABB AB Grid Autmatin Prducts SE Västerås, Sweden Phne +46 (0) Dcument ID: 1MRG Issued: January 2019 Revisin: C abb.cm/prtectin-cntrl 1MRG C 5/5