g700-p planetary gearbox
|
|
- Mervyn Curtis
- 5 years ago
- Views:
Transcription
1 Gearboxes g0-p planetary gearbox to 0 Nm
2 Contents General nformaton Lst of abbrevatons nformaton Equpment The gearbox kt Functons and features Permssble radal and axal forces at output Backlash and torsonal rgdty Speeds and torques Moments of nerta
3 Contents
4 General nformaton Lst of abbrevatons F ax,max F rad,max J m [N] [N] [kgcm²] [kg] Max. axal force Max. radal force Rato Moment of nerta Mass
5 General nformaton nformaton The planetary gearbox g0 s the deal soluton for demandng and dynamc tasks. Wth ts hgh relablty, long servce lfe and outstandng scalablty, t provdes everythng you need to manage demandng machne tasks. Versons Hgh nput speed possble Max. nput speed 100 rpm Wde varety of ratos = n ratos Hgh rated torque bandwdth 0 Nm n fve szes Lfetme lubrcaton Sutable for any mountng poston, hence only one varant The product name Gearbox type range Desgn Rated torque [Nm] g0-p g0-p Planetary gearbox g0 - P 130 g0-p 0
6 General nformaton Equpment Overvew The equpment ncludes all the optons avalable as standard and all the bult-on accessores of the product. Output shaft Housng desgn Sold shaft wth featherkey Threaded ptch crcle wth centerng
7 General nformaton The gearbox kt Gearbox detals Drven shaft Sold shaft wth featherkey [mm] Desgn Gasket Bearng Housng Housng verson Output flange flange dameter [mm] Lubrcant Type Breather element Backlash Backlash g0-p 10x23 g0-p x30 60 x36 Standard NBR Standard Wthout foot wth centerng Klüberplex BEM Wthout Standard g0-p 25x50 5 x 160 ƒ Further nformaton and nstallaton feasbltes can be found n the Gearboxes chapter.
8 General nformaton The gearbox kt Gearbox detals Sold shaft
9 General nformaton Functons and features Housng Desgn Sold shaft Desgn Tolerance Toothed parts Desgn Ratos Shaft-hub jont Lubrcants Changng nterval Quanttes Mechancal effcency 1-stage gearboxes [η c=1 ] 2-stage gearboxes [η c=1 ] 3-stage gearboxes [η c=1 ] g0-p g0-p g0-p Cylndrcal shape wth keyway to DIN 65 h7 Spur-toothed Mathematcally precse Force-ft, motor gearbox connected va clampng hub Lubrcated for lfe Can be nstalled n any orentaton Drecton of rotaton
10 Permssble radal and axal forces at output Permssble radal force Frad,per = Fradmax f Fax = 0 Permssble axal force Fax,per = Fax,max f Frad = 0 ƒ If Frad and Fax 0, please contact Lenze. Applcaton of forces l x Fax Frad n2 [r/mn] 100 g0-p Max. radal force, Sold shaft wth flange Max. axal force, Sold shaft wth flange Frad,max Fax,max [N] [N] g0-p g0-p ƒ Applcaton of force Frad: centre of shaft journal (x = l/2) ƒ Fax,max only vald wth Frad = 0
11 Backlash and torsonal rgdty 1-stage gearboxes g0-p g0-p g0-p Backlash [arcmn] Torsonal stffness [Nm/arcmn] stage gearboxes g0-p g0-p g0-p Backlash [arcmn] Torsonal stffness [Nm/arcmn] stage gearboxes g0-p g0-p g0-p Backlash [arcmn] Torsonal stffness [Nm/arcmn] ƒ The backlash s measured wth 1 % of the rated torque, at least 1 Nm.
12 Speeds and torques ƒ ƒ ƒ Rated torque M 2, GN At rated speed, ambent temperature 30 C and duty type S1. Max. output torque M 2, max At output speed 100 r/mn, duty type S1, unform and shockfree moton. Emergency off torque M 2, not Max.1000 emergency swtchng off actons durng gearbox servce lfe ƒ Max. gearbox nput speed n 1, max 50% Max. medum speed at 50 % rated torque n 1, max 100% Max. medum speed at 100 % rated torque n 1, max Max. permssble speed 1-stage gearboxes Rato Rated torque M 2, GN Max. output torque M 2, max Max. gearbox nput speed n 1, max 50% n 1, max 100% n 1, max Emergency offtorque M 2, not [Nm] [Nm] [r/mn] [r/mn] [r/mn] [Nm] g0-p g0-p g0-p
13 Speeds and torques 2-stage gearboxes Rato Rated torque M 2, GN Max. output torque M 2, max Max. gearbox nput speed n 1, max 50% n 1, max 100% n 1, max Emergency offtorque M 2, not [Nm] [Nm] [r/mn] [r/mn] [r/mn] [Nm] g0-p g0-p g0-p
14 Speeds and torques 3-stage gearboxes Rato Rated torque M 2, GN Max. output torque M 2, max Max. gearbox nput speed n 1, max 50% n 1, max 100% n 1, max Emergency offtorque M 2, not [Nm] [Nm] [r/mn] [r/mn] [r/mn] [Nm] g0-p g0-p g0-p
15 Moments of nerta ƒ ƒ The moments of nerta relate to the drve shaft of the gearbox. The total moment of nerta s calculated by addng the values of the gearbox, motor and accessores. 1-stage gearboxes g0-p g0-p g0-p Dmensons Motor shaft dameter d [mm] Rato Momentofnerta Momentofnerta J [kgcm²] Dmensons Motor shaft dameter d [mm] Rato J [kgcm²] g0-p
16 Moments of nerta 2-stage gearboxes Momentofnerta Rato Dmensons Momentofnerta Rato Dmensons Motor shaft dameter Motor shaft dameter J d J d [kgcm²] [mm] [kgcm²] [mm] g0-p g0-p g0-p
17 Moments of nerta 2-stage gearboxes Dmensons Motor shaft dameter d Rato Momentofnerta J [mm] [kgcm²]
18 Moments of nerta 3-stage gearboxes Momentofnerta Rato Dmensons Momentofnerta Rato Dmensons Motor shaft dameter Motor shaft dameter J d J d [kgcm²] [mm] [kgcm²] [mm] g0-p g0-p g0-p
Product Information. Miniature rotary unit PRH
Product Informaton Mnature rotary unt PRH PRH Mnature rotary unt Precse. Compact. Bus capable. PRH unversal rotary unt servo-electrc mnature rotary unt wth angle > 360, center bore, and precson gear Feld
More informationProduct Information. XY compensation unit with spring return AGE-F
Product Informaton AGE-F AGE-F Flat. Flexble. Compact. Compensaton unt for applcatons n assembly, loadng, and unloadng of machnes and workpece carrers. The use of AGE-F makes t possble to safely grp and
More informationModular. Robust. Flexible. SWS Quick-change system
Modular. Robust. Flexble. SWS Quck-change system Pneumatc tool changng system wth patented lockng system. Feld of Applcaton C an be used wherever short changeover tmes between a handlng devce and a tool
More informationFilling level and Temperature Sensor HFT C4 / R / MD
Fllng level and Temperature Sensor HFT C4 / R / MD Level measurng range 0.25-5.0 m Pressure measurng range 0-0.5 bar Temperature measurng range -10 100 C Voltage supply 18 30 V DC Features Fllng level
More informationModular. Robust. Flexible. SWS Quick-change system
SWS Modular. Robust. Flexble. SWS Quck-change system Pneumatc tool changng system wth patented lockng system. Feld of Applcaton C an be used wherever short changeover tmes between a handlng devce and a
More informationTable of Contents. Introduction. Product Information and User Guide. 2.1 Variants Order Code for In-line Helical Gear Unit...
Table of Contents Introducton 1.1 CHENTA Company Profle...4 1.2 Product Overvew...5 1. Operaton Manual...6 1.4 General Problems & Improvements...8 Product Informatond User Gude 2.1 Varants...9 2.2 Order
More informationµ-precision measuring heads and chamfer measuring instruments Overall catalog English HEXACON TiN COATED 2200 HV 100 % 0,4 0,2 0,6 0,4 0,8
ABS mm SETPR ABS 5 7 7 HEXACON Made n,1 mm 9 9 9,4,2,6,4,6,8,8 1 9,2 7 7 5 TOL ON / OFF SET TOL MENU 31.899 - Made Precson n Hgh Prec TN COATED 2 HV % on - Made n PRESET DATA RESET Englsh Ø µ-precson measurng
More informationGeneral Description. Description
June 0 Sheet 0 Metal-Enclosed Swtchgear MVS Medum Voltage Load Interrupter Fusble Swtch General Descrpton.0- Motor Operated MVS Swtches Applcaton Eaton s Cutler-Hammer MVS Pow-R- Drve motor operator makes
More informationProduct Information. Universal gripper EGL
Product Informaton EGL EGL Flexble. Robust. Bus capable. EGL unversal grpper Servo-electrc 2-fnger parallel grpper wth senstve grppng force control and long stroke Feld of applcaton unversally applcable,
More informationBus Capable. Flexible. High Performance Density. PG Universal Gripper
PG Bus Capable. Flexble. Hgh Performance Densty. PG Unversal Grpper Servo-electrc 2-fnger parallel grpper wth hghly precse grppng force control and long stroke Feld of Applcaton A ll-purpose, ultra-flexble
More informationJan 2017, REV T
Modular Plug Hand Tools (Premum Grade) 231652-[ ] Instructon Sheet 408-9767 Jan 2017, REV T PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered hand tools.
More informationMachine Learning 9. week
Machne Learnng 9. week Mappng Concept Radal Bass Functons (RBF) RBF Networks 1 Mappng It s probably the best scenaro for the classfcaton of two dataset s to separate them lnearly. As you see n the below
More informationHigh Precision Planetary Gearboxes
Hgh Precson Hgh Precson Hgh Precson We re delghted to present you our ctlogue, whch showcses the new Güdel plnetry geroxes n three rnges nd fve szes. s ledng mnufcturer of lner, drve nd system technology
More informationInfoTerminal Touch Installation Instructions
Order no.: 2071 xx 1. Safety warnngs Electrcal equpment must be nstalled and ftted by qualfed electrcans only and n strct observance of the relevant accdent preventon regulatons. Cut out the crcut breaker
More informationModeling Concave Globoidal Cam with Swinging Roller Follower: A Case Study
Modelng Concave Globodal Cam wth Swngng Roller Follower: A Case Study Nguyen Van Tuong, and Premysl Pokorny Abstract Ths paper descrbes a computer-aded desgn for desgn of the concave globodal cam wth cylndrcal
More informationTECHNIQUE OF FORMATION HOMOGENEOUS SAMPLE SAME OBJECTS. Muradaliyev A.Z.
TECHNIQUE OF FORMATION HOMOGENEOUS SAMPLE SAME OBJECTS Muradalyev AZ Azerbajan Scentfc-Research and Desgn-Prospectng Insttute of Energetc AZ1012, Ave HZardab-94 E-mal:aydn_murad@yahoocom Importance of
More informationON THE DESIGN OF LARGE SCALE REDUNDANT PARALLEL MANIPULATOR. Wu huapeng, Heikki handroos and Juha kilkki
ON THE DESIGN OF LARGE SCALE REDUNDANT PARALLEL MANIPULATOR Wu huapeng, Hekk handroos and Juha klkk Machne Automaton Lab, Lappeenranta Unversty of Technology LPR-5385 Fnland huapeng@lut.f, handroos@lut.f,
More informationIP Camera Configuration Software Instruction Manual
IP Camera 9483 - Confguraton Software Instructon Manual VBD 612-4 (10.14) Dear Customer, Wth your purchase of ths IP Camera, you have chosen a qualty product manufactured by RADEMACHER. Thank you for the
More informationTRAINING LEVEL II. RECIPIENTS Installation companies with the MD training lv1 Distributors with MD training lv1
TRAINING LEVEL II RECIPIENTS Installaton companes wth the MD tranng lv1 Dstrbutors wth MD tranng lv1 - Z-WAVE - APPs - LP283WD - LP15 - PSB - OCT41 - OC66 - DI32 - OF88 - AC88 - LD88 - METEO - LED88 -
More informationDas Winkelgetriebe. Made in Germany. Servo gearboxes (precision gearboxes) Type: LC, VC, HC, SC. bevel gearboxes. Miniature.
Mad n Grmany Mnatur bvl garboxs Bvl garboxs Worm garboxs Garbox motors Srvo garboxs (prcson garboxs) Spcal garboxs ATEX garboxs Gar sts Srvc Hypod garboxs Srvo garboxs (prcson garboxs) Hygn-dsgn garboxs
More informationAlufix Expert D Design Software #85344
238 ALUFIX SOFTWARE Alufx Expert 2014 3D Desgn Software #85344 Alufx Expert software makes automatc desgns for fxtures wth correspondng partlsts. You choose the system and defne clampng ponts. The software
More informationG4CM690V16ATL20 Part No Technical data. Power factor monitoring (cosφ) in 1- or 3-phase mains
Power factor montorng (cosφ) n 1- or 3-phase mans Loadmontors - GAMMA seres Montorng of nductve and capactve consumers Multfuncton Temperature montorng of the motor wndng -ey, Fault latch Recognton of
More informationSYMBOLS, UNITS AND DEFINITIONS
SYMBOLS, UNITS AND DEFINITIONS Values depending on the APPLICATION term u.m. definition A 2 [N] Thrust force on output shaft R 2 [N] Radial force on output shaft ED [min] Loading time ED% [%] Loading time
More informationST70 Instruments. Operating Guide. Welcome. This Operating Guide. Contents
ST70 Instruments Operatng Gude Welcome Congratulatons on havng chosen a Raymarne ST70 nstrument. Ths gves you easy access to the mportant nformaton you need to make your boatng experence both safe and
More informationVRT012 User s guide V0.1. Address: Žirmūnų g. 27, Vilnius LT-09105, Phone: (370-5) , Fax: (370-5) ,
VRT012 User s gude V0.1 Thank you for purchasng our product. We hope ths user-frendly devce wll be helpful n realsng your deas and brngng comfort to your lfe. Please take few mnutes to read ths manual
More informationAvaya Scopia XT Meeting Center
Avaya Scopa XT Meetng Center Quck Setup Gude Sngle Montor Dual Montor Package Content: Cart Components 3x/4x IEC320 Power Cords Internatonal (4xIEC) Outlet Strp Avaya Scopa XT Meetng Center Quck Setup
More informationDLK Pro the all-rounder for mobile data downloading. Tailor-made for various requirements.
DLK Pro the all-rounder for moble data downloadng Talor-made for varous requrements www.dtco.vdo.com Smply brllant, brllantly smple Always the rght soluton The DLK Pro s the VDO product famly, whch sets
More information4-channel universal dimming actuator 210W Installation Instructions
4-channel unversal dmmng actuator 210W Order no.: 1043 00 System nformaton Ths devce s a product of the Instabus KNX/EIB-system and comples wth KNX drectves. Techncal knowledge obtaned n KNX tranng courses
More informationAnalysis of 3D Cracks in an Arbitrary Geometry with Weld Residual Stress
Analyss of 3D Cracks n an Arbtrary Geometry wth Weld Resdual Stress Greg Thorwald, Ph.D. Ted L. Anderson, Ph.D. Structural Relablty Technology, Boulder, CO Abstract Materals contanng flaws lke nclusons
More informationProtection relay with full PLC function
S U B S T A T I O N S Protecton relay wth full PLC functon SEPCOS-NG s a hgh-tech equpment that satsfes the most demandng safety requrements applcable to DC electrcal power transmsson networks. SEPCOS-NG
More information3D Camera. Dimensions. support.pickit3d.com 132,50 R7,60 R4.10 GENERAL SPECIFICATIONS BALL JOINT PIVOT (P) PROFILE 3D CAMERA FRONT
D Camera Dmensons GENERAL SPECIFICATIONS,50 D MEASUREMENT METHOD EXTERNAL LIGHTS IMAGE PROCESSING SPEED ACCURACY REPEATABILITY D CAMERA WEIGHT W/O D CAMERA WEIGHT TOTAL TEMPERATURE OPERATING CONDITIONS
More informationmquest Quickstart Version 11.0
mquest Quckstart Verson 11.0 cluetec GmbH Emmy-Noether-Straße 17 76131 Karlsruhe Germany www.cluetec.de www.mquest.nfo cluetec GmbH Karlsruhe, 2016 Document verson 5 27.04.2016 16:59 > Propretary notce
More informationMULTIGIG RT* Signal Connectors
MULTIGIG RT* Sgnal Connectors Applcaton Specfcaton 114-13056 22 OCT 12 All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons are n mllmeters. Unless otherwse specfed, dmensons
More information3D Camera CAM-3D-M CAM-3D-U. Field of view. FOV 425 mm. support.pickit3d.com. Dimensions FIELD OF VIEW (FOV) REGION OF INTEREST (ROI)
D Camera Feld of vew CAM-D-M CAM-D-U sde vew front vew FIELD OF VIEW () Dmensons 00 mm 5 mm 50 mm 50 mm To be vsble for Pck-t, all parts or tems of nterest must be nsde the feld of vew () of the D camera.
More informationNMKOMMT. kéï=~ë=çñw= pfsfpflk=p. fåëí~ää~íáçå=fåëíêìåíáçåë= `O H =Ó=`R H I=jN H = = båöäáëü
kéï=~ë=çñw= NMKOMMT pfsfpflk=p fåëí~ää~íáçå=fåëíêìåíáçåë= `O H =Ó=`R H I=jN H = = båöäáëü General nformaton Srona Dental Systems GmbH General nformaton About ths document Ths document descrbes the nstallaton
More informationFIBARO WALL PLUG OPERATING MANUAL FGBWHWPE-102/FGBWHWPF-102 CONTENTS
OPERATING MANUAL EN FIBARO WALL PLUG FGBWHWPE-102/FGBWHWPF-102 CONTENTS #1: Descrpton and features 3 #2: Parng the accessory 4 #3: Reset 5 #4: Functonalty 6 v1.0 #5: W-F 8 #6: Confgurable parameters 9
More informationDesign and Realization of Open CNC System Based on Software Motion Controller
Internatonal Forum on Management, Educaton and Informaton Technology Applcaton (IFMEITA 2016) Desgn and Realzaton of Open CNC System Based on Software Moton Controller Xu Ran1, a, Janqun Lu2, b, Weqang
More informationVibration Characteristic Analysis of Axial Fan Shell Based on ANSYS Workbench
Internatonal Conference on Logstcs Engneerng, Management and Computer Scence (LEMCS 2015) Vbraton Characterstc Analyss of Axal Fan Shell Based on ANSYS Workbench Lchun Gu College of Mechancal and Electrcal
More informationVirtual Machine Migration based on Trust Measurement of Computer Node
Appled Mechancs and Materals Onlne: 2014-04-04 ISSN: 1662-7482, Vols. 536-537, pp 678-682 do:10.4028/www.scentfc.net/amm.536-537.678 2014 Trans Tech Publcatons, Swtzerland Vrtual Machne Mgraton based on
More informationRJ45 CONNECTORS up to 10 Gbit/s
MULTIPOLE CONNECTORS RJ45 New products 2016 RJ45 CONNECTORS up to 10 Gbt/s 45 CJ adaptors enclosures: page: sze 21.21 nsulatng type... 526-527 (CK IN, CKG/MKG VN/VAN *) metallc type (CKAX I, CKAX/MKAX
More informationBeautiful & practical
Tps for purchasng your ktchen The 2 sdes of a ktchen Beautful & practcal For long-lastng joy n your new ktchen Experence shows that a ktchen wll last about 15 years or longer. However, t stll has to prove
More informationA high precision collaborative vision measurement of gear chamfering profile
Internatonal Conference on Advances n Mechancal Engneerng and Industral Informatcs (AMEII 05) A hgh precson collaboratve vson measurement of gear chamferng profle Conglng Zhou, a, Zengpu Xu, b, Chunmng
More informationSMART PHOTO PRINTER USER'S GUIDE. Version V MODEL SmartD90-EV
SMART PHOTO PRINTER MODEL SmartD90-EV USER'S GUIDE Verson V1.5.2.0 1 TABLE OF CONTENTS Introducton Introducton 3 Bascs 4 Constructon of compostons 5 Operaton Easy Prnt Servce 8 Fun Prnt Servce 10 Sharng
More informationVideoJet X10 SN Network Video Server. Installation and Operating Manual
VdeoJet X10 SN Network Vdeo Server en Installaton and Operatng Manual VdeoJet X10 SN VdeoJet X10 SN Table of Contents en 3 Table of Contents 1 Preface 7 1.1 About ths Manual 7 1.2 Conventons n ths Manual
More informationExperiments of a Novel Magnetic Levitation Stage for Wide Area Movements
558 Journal of Electrcal Engneerng & Technology Vol. 7, No., pp. 558~563, 1 http://dx.do.org/1.537/jeet.1.7..558 Experments of a Novel Magnetc Levtaton Stage for Wde Area Movements Jeong-Woo Jeon, MtcaCaraan*,
More informationOperator's Manual EU4 / EU6 / EU8. External Unwinder. Made in Germany
Operator's Manual External Unwnder EU4 / EU6 / EU8 Made n Germany 2 Operator's Manual 2 for the followng products Part.-No. Descrpton Type 5946091 External Unwnder EU4 5946421 External Unwnder EU6 5945806
More informationSLAM Summer School 2006 Practical 2: SLAM using Monocular Vision
SLAM Summer School 2006 Practcal 2: SLAM usng Monocular Vson Javer Cvera, Unversty of Zaragoza Andrew J. Davson, Imperal College London J.M.M Montel, Unversty of Zaragoza. josemar@unzar.es, jcvera@unzar.es,
More informationTouch & See Control and visualization unit
Code * Materal Package Dmens. [mm] EK-FOQ-GAx EK-FOQ-GBx plastc metal pcs. 86 x 86 Touch & See Control and vsualzaton unt Code: EK-EC-TP-... S TP Datasheet STEKECTP_EN KNX devce for swtchng, controllng
More informationDESIGN OF A HAPTIC DEVICE FOR EXCAVATOR EQUIPPED WITH CRUSHER
DESIGN OF A HAPTIC DEVICE FOR EXCAVATOR EQUIPPED WITH CRUSHER Kyeong Won Oh, Dongnam Km Korea Unversty, Graduate School 5Ga-1, Anam-Dong, Sungbuk-Gu, Seoul, Korea {locosk, smleast}@korea.ac.kr Jong-Hyup
More informationLecture - Data Encryption Standard 4
The Data Encrypton Standard For an encrypton algorthm we requre: secrecy of the key and not of the algorthm tself s the only thng that s needed to ensure the prvacy of the data the best cryptographc algorthms
More informationThe motion simulation of three-dof parallel manipulator based on VBAI and MATLAB Zhuo Zhen, Chaoying Liu* and Xueling Song
Internatonal Conference on Automaton, Mechancal Control and Computatonal Engneerng (AMCCE 25) he moton smulaton of three-dof parallel manpulator based on VBAI and MALAB Zhuo Zhen, Chaoyng Lu* and Xuelng
More informationA New Token Allocation Algorithm for TCP Traffic in Diffserv Network
A New Token Allocaton Algorthm for TCP Traffc n Dffserv Network A New Token Allocaton Algorthm for TCP Traffc n Dffserv Network S. Sudha and N. Ammasagounden Natonal Insttute of Technology, Truchrappall,
More informationA Hybrid Geometric Modeling Method for Large Scale Conformal Cellular Structures
A Hybrd Geometrc Modelng Method for Large Scale Conformal Cellular Structures Hongqng Wang a Senor Research Engneer Yong Chen b Assstant Professor Davd W. Rosen c* Professor a 3D Systems, 26081 Avenue
More informationGEARBOXES. Input Detail. Self Locking Output PF15-6 PF15-6A PF15-6AR. Efficiency at 1000 Rpm PF15-8 PF15-8A PF15-8AR 6 PF15-10 PF15-10A PF15-10AR 6
PF Flange Input 0. 3.75 Nm.:1-80:1 3. 3 Ø5 H7 Ø1 mm wide, 5 deep slot to suit Ø x 8 Long Pin PF 3 () Ø3.30 Thru. 5 Ø H7 JS 1 Fxa 0 Low Backlash Red. Backlash ' 1 () M3 Thru. Ø3 PCD Ø5 00 (kg.m ) PF- PF-A
More informationContours Planning and Visual Servo Control of XXY Positioning System Using NURBS Interpolation Approach
Inventon Journal of Research Technology n Engneerng & Management (IJRTEM) ISSN: 2455-3689 www.jrtem.com olume 1 Issue 4 ǁ June. 2016 ǁ PP 16-23 Contours Plannng and sual Servo Control of XXY Postonng System
More informationImprovement of Spatial Resolution Using BlockMatching Based Motion Estimation and Frame. Integration
Improvement of Spatal Resoluton Usng BlockMatchng Based Moton Estmaton and Frame Integraton Danya Suga and Takayuk Hamamoto Graduate School of Engneerng, Tokyo Unversty of Scence, 6-3-1, Nuku, Katsuska-ku,
More informationAccounting for the Use of Different Length Scale Factors in x, y and z Directions
1 Accountng for the Use of Dfferent Length Scale Factors n x, y and z Drectons Taha Soch (taha.soch@kcl.ac.uk) Imagng Scences & Bomedcal Engneerng, Kng s College London, The Rayne Insttute, St Thomas Hosptal,
More informationL Series Miniature Slide Switches
Features/Benefits Positive detent Enclosed housing Maintained and momentary functions PC and panel mounting RoHS compliant Typical Applications Communications equipment Lighting devices Models Available
More informationDevelopment of Inverse Dynamic Controller for Industrial robots with HyRoHILS system
June 2-5, KINTEX, Gyeongg-Do, Korea Development of Inverse Dynamc Controller for Industral robots wth HyRoHILS system Je Sung Yeon*, Eu Jn Km**, Sang-Hun Lee**, Jong Hyeon Park*, and Jong-Sung Hur** *
More informationInstallation Instructions. METRAwin Version 8/ Calibration Software
Installaton Instructons METRAwn 90 Calbraton Software 3-349-717-15 Verson 8/05.13 Copyrght Copyrght 2003-2013 GMC-I Messtechnk GmbH. All rghts reserved. These nstallaton nstructons, as well as the software
More informationENERGY EFFICIENCY OPTIMIZATION OF MECHANICAL NUMERICAL CONTROL MACHINING PARAMETERS
ENERGY EFFICIENCY OPTIMIZATION OF MECHANICAL NUMERICAL CONTROL MACHINING PARAMETERS Zpeng LI*, Ren SHENG Yellow Rver Conservancy Techncal Insttute, School of Mechancal Engneerng, Henan 475000, Chna. Correspondng
More informationSetting io. Here s your guide
Settng o Here s your gude Set&Go o o Set&Go STEP LOOK FOR THE INSTALLATION USING AUTOSCAN The nstallaton tool for all o-home stes my nstallaton - Set&Go o - V.0 Your gude for success wth every o nstallaton
More informationSimulation Based Analysis of FAST TCP using OMNET++
Smulaton Based Analyss of FAST TCP usng OMNET++ Umar ul Hassan 04030038@lums.edu.pk Md Term Report CS678 Topcs n Internet Research Sprng, 2006 Introducton Internet traffc s doublng roughly every 3 months
More informationMetal-Enclosed Switchgear MVS Medium Voltage Load Interrupter Fusible Switch MVS Load Interrupter Switchgear. Description.
.0- Metal-Enclosed Swtchgear MVS Medum Voltage General Descrpton June 0 Sheet 0 MVS Load Interrupter Swtchgear Descrpton Eaton s Cutler-Hammer MVS Load Interrupter Swtchgear s an ntegrated assembly of
More informationSIZES FROM 1, ,000 Nm BACKLASH FREE, TORSIONALLY STIFF METALLIC BELLOWS COUPLINGS
BX ZA SIZES FROM 1,500-100,000 Nm BAKLASH FREE, TORSIONALLY STIFF METALLI BELLOWS OUPLINGS BELLOWS OUPLINGS BX ZA Optional: GENERAL INFORMATION ABOUT R+W BELLOWS OUPLINGS: SERVIE LIFE R+W bellows couplings
More information5.0 Quality Assurance
5.0 Dr. Fred Omega Garces Analytcal Chemstry 25 Natural Scence, Mramar College Bascs of s what we do to get the rght answer for our purpose QA s planned and refers to planned and systematc producton processes
More informationIntroduction to Programming. Lecture 13: Container data structures. Container data structures. Topics for this lecture. A basic issue with containers
1 2 Introducton to Programmng Bertrand Meyer Lecture 13: Contaner data structures Last revsed 1 December 2003 Topcs for ths lecture 3 Contaner data structures 4 Contaners and genercty Contan other objects
More informationMulti-stable Perception. Necker Cube
Mult-stable Percepton Necker Cube Spnnng dancer lluson, Nobuuk Kaahara Fttng and Algnment Computer Vson Szelsk 6.1 James Has Acknowledgment: Man sldes from Derek Hoem, Lana Lazebnk, and Grauman&Lebe 2008
More informationApplication Specification AMPLIMITE* Connectors for Coaxial and Signal HD- 20 Contacts 18 Mar 11 Rev E
Applcaton Specfcaton AMPLIMITE* Connectors for 114-40032 Coaxal and Sgnal HD- 20 Contacts 18 Mar 11 Rev E All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons are n mllmeters
More informationCooperative Human and Machine Perception in Teleoperated Assembly
Expermental Robotcs VII. The Ffth Internatonal Symposum, Honolulu, HI, December 10-13, 2000, D. Rus and S. Sngh, eds., Lecture notes n control and nformaton scences, Sprnger-Verlag. Cooperatve Human and
More informationF-5000 View Software Installation and Operation Guide Belcher Road South, Largo, FL USA Tel +1 (727) Fax +1 (727)
ONICON Flow and Energy Measurement F-5000 Vew Software Installaton and Operaton Gude 11451 Belcher Road South, Largo, FL 33773 USA Tel +1 (727) 447-6140 Fax +1 (727)442-5699 2032-1 / 107050 Rev B www.oncon.com
More informationAPPLICATION OF A COMPUTATIONALLY EFFICIENT GEOSTATISTICAL APPROACH TO CHARACTERIZING VARIABLY SPACED WATER-TABLE DATA
RFr"W/FZD JAN 2 4 1995 OST control # 1385 John J Q U ~ M Argonne Natonal Laboratory Argonne, L 60439 Tel: 708-252-5357, Fax: 708-252-3 611 APPLCATON OF A COMPUTATONALLY EFFCENT GEOSTATSTCAL APPROACH TO
More informationAngle-Independent 3D Reconstruction. Ji Zhang Mireille Boutin Daniel Aliaga
Angle-Independent 3D Reconstructon J Zhang Mrelle Boutn Danel Alaga Goal: Structure from Moton To reconstruct the 3D geometry of a scene from a set of pctures (e.g. a move of the scene pont reconstructon
More informationGeneral Description. Types of Distribution Systems. Simple Radial. Primary Switch. Transformer
January 0 Sheet 0 Secondary Unt Substatons Secondary Below 00 V Product Overvew General Descrpton.0- General Descrpton Defnton A secondary unt substaton s a closecoupled assembly consstng of enclosed prmary
More informationInstallation and User Guide. Digidim Remote Control (303) Product description. Switching Lights On/Off using Digidim 303 Remote
Installaton and User Gude Dgdm Remote Control (0) Product descrpton The Dgdm Remote (0) can be used n conjuncton wth the Dm Sense to modfy the preset lght levels and recall/ store scenes, as well as actvatng
More informationLife Tables (Times) Summary. Sample StatFolio: lifetable times.sgp
Lfe Tables (Tmes) Summary... 1 Data Input... 2 Analyss Summary... 3 Survval Functon... 5 Log Survval Functon... 6 Cumulatve Hazard Functon... 7 Percentles... 7 Group Comparsons... 8 Summary The Lfe Tables
More informationA New Design of the Vehicle Detection System for Measuring Outline Size
3rd Internatonal Conference on Mechatroncs and Industral Informatcs (ICMII 205) A New Desgn of the Vehcle Detecton System for Measurng Outlne Sze Zhou Xao-bo,a*,Zhu Yong,b,Zhu Janhu2,c School of Physcs
More informationDevelopment of a FPGA-based Motion Control IC for Robot Arm
Development of a FPGA-based oton Control IC for Robot Arm Yng-Sheh ung, ember IEEE Southern Tawan Unversty of Technology No. Nan-Ta Street, Yung-ang Tanan County, 7, TAIWAN kung@mal.stut.edu.tw Gua-Sheh
More informationYOUR COMPLETE SOURCE FOR. Gear Reducers Couplings & Linear Mount Products. Product Range. GAM Can.
YOUR COMPLETE SOURCE FOR Gear Reducers Couplings & Product Range Linear Mount Products GAM Can. YOUR COMPLETE SOURCE FOR GEAR REDUCERS, COUPLINGS & LINEAR MOUNT PRODUCTS Product Selection Guide Gear Reducers
More informationARTICLE IN PRESS. Robotics and Computer-Integrated Manufacturing
Robotcs and Computer-Integrated Manufacturng 26 (2) 24 38 Contents lsts avalable at ScenceDrect Robotcs and Computer-Integrated Manufacturng journal homepage: www.elsever.com/locate/rcm Cost-effcent drllng
More informationSteps for Computing the Dissimilarity, Entropy, Herfindahl-Hirschman and. Accessibility (Gravity with Competition) Indices
Steps for Computng the Dssmlarty, Entropy, Herfndahl-Hrschman and Accessblty (Gravty wth Competton) Indces I. Dssmlarty Index Measurement: The followng formula can be used to measure the evenness between
More informationMode Participation Factor Computer (MPFC) Manual
Mode Partcpaton Factor Computer (MPFC) Manual Smon Wedemann and Osar Wallrapp Verson: Aprl 28 th, 2006 Note: Ths manual, ts graphcal desgn and layout and all contents are the ntellectual property of the
More informationInverse kinematic Modeling of 3RRR Parallel Robot
ème Congrès Franças de Mécanque Lyon, 4 au 8 Août 5 Inverse knematc Modelng of RRR Parallel Robot Ouafae HAMDOUN, Fatma Zahra BAGHLI, Larb EL BAKKALI Modelng and Smulaton of Mechancal Systems Laboratory,
More informationProtection and control relays
S U B S T A T I O N S Protecton and control relays The SEPCOS PRO range s a hgh-tech generaton of protecton and control relay that satsfes the most demandng safety requrements applcable to DC electrcal
More informationEN Operating and installation instructions for RADEMACHER tubular motors... 27
Operatng and nstallaton nstructons for RADEMACHER tubular motors... 27 Applcable for the followng seres: RolloTube Intellgent Small/Medum Item numbers: 2640 06 95 / 2640 10 95 / 2660 10 95 / 2660 20 95
More informationCOMPARISON OF A MACHINE OF MEASUREMENT WITHOUT CONTACT AND A CMM (1) : OPTIMIZATION OF THE PROCESS OF METROLOGY.
TEHNOMUS - New Technologes and Products n Machne Manufacturng Technologes COMPARISON OF A MACHINE OF MEASUREMENT WITHOUT CONTACT AND A CMM (1) : OPTIMIZATION OF THE PROCESS OF METROLOGY. WOLFF Valery 1,
More informationDual In- Line Package (DIP)
Dual In- Lne Package (DIP) Applcaton Specfcaton Programmng Swtches 114-1056 (7000 and 7100 Seres) 03 MAY 11 Rev D All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons are
More informationThe Greedy Method. Outline and Reading. Change Money Problem. Greedy Algorithms. Applications of the Greedy Strategy. The Greedy Method Technique
//00 :0 AM Outlne and Readng The Greedy Method The Greedy Method Technque (secton.) Fractonal Knapsack Problem (secton..) Task Schedulng (secton..) Mnmum Spannng Trees (secton.) Change Money Problem Greedy
More informationMiniature Circular Plastic Connector (CPC)
Mnature Crcular Plastc Connector (CPC) Applcaton Specfcaton 114-13105 23 MAR 11 All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons are n mllmeters [and nches]. Unless otherwse
More informationLobachevsky State University of Nizhni Novgorod. Polyhedron. Quick Start Guide
Lobachevsky State Unversty of Nzhn Novgorod Polyhedron Quck Start Gude Nzhn Novgorod 2016 Contents Specfcaton of Polyhedron software... 3 Theoretcal background... 4 1. Interface of Polyhedron... 6 1.1.
More informationComputer models of motion: Iterative calculations
Computer models o moton: Iteratve calculatons OBJECTIVES In ths actvty you wll learn how to: Create 3D box objects Update the poston o an object teratvely (repeatedly) to anmate ts moton Update the momentum
More informationType-2 Fuzzy Non-uniform Rational B-spline Model with Type-2 Fuzzy Data
Malaysan Journal of Mathematcal Scences 11(S) Aprl : 35 46 (2017) Specal Issue: The 2nd Internatonal Conference and Workshop on Mathematcal Analyss (ICWOMA 2016) MALAYSIAN JOURNAL OF MATHEMATICAL SCIENCES
More informationCompressed Air Management System. SIGMA AIR MANAGER 2 Key technology for Industry
Compressed Ar Management System SIGMA AIR MANAGER 2 Key technology for Industry 4.0 www.kaeser.com SIGMA AIR MANAGER 2 Compressed ar control technology 4.0 from KAESER Compressors - BSD 75 - BSD 75 - BSD
More informationGasolineEnginePump. PTG305T PTG405 No. 2. c I. FUJI HEAVY INDUSTRIES LTD. ISSUE EMD=PP0871-
GasolineEnginePump Model c PTG305T PTG405 No. 2 c @ FUJ HEAVY NDUSTRES LTD. SSUE EMD=PP0871- HOW TO USE THS PARTS CATALOG 1. Reference numbers with an asterisk Reference numbers marked with an asterisk
More informationIntelligent Dynamic Simulation of Mechanisms
Intellgent Dynamc Smulaton of Mechansms Glenn A. Kramer Schlumberger Laboratory for Computer Scence 8311 North RR 620 Austn, Texas 78726 net: gak~slcs.slb.com Abstract Dynamc smulaton nvolves solvng sets
More informationCOMPRESSORS. Compressed Air Management System. SIGMA AIR MANAGER 4.0 Key technology for Industrie 4.0 For compressor and blower stations
Compressed Ar Management System SIGMA AIR MANAGER 4.0 Key technology for Industre 4.0 For compressor and blower statons www.kaeser.com SIGMA AIR MANAGER 4.0 Compressed ar control technology 4.0 from KAESER
More informationISSN 2409-9392,,, 2017,. 30 backlashes. Ths allows conductng the cuttng process wthout the formaton of technologcal protruson between wres. Dstnctve features of a new cut shapng technology scheme are reflected
More informationTouch & See control and visualisation unit with 2-fold pushbutton
Rockers and frames are avalable n plastc materal or metal. A metallc support, the fxng screws and the termnals for connecton of the KNX bus lne and the auxlary power supply are delvered wth the devce.
More informationSecurity. Workplace Manager
User Gude Manageablty and Securty Workplace Manager Congratulatons on your purchase of an nnovatve product from Fujtsu. The latest nformaton about our products, tps, updates etc. can be found on the Internet
More informationAVL. Mobile Data, AVL & Mapping. Track with Confidence
Moble Data, & Mappng Track wth Confdence 3012 MDT MILEAGE REPORTING 5 GENERAL PURPOSE INPUTS CARD READER & PRINTER CAPABILITIES TEXT MESSAGING MOTOTRBO TM & NEXEDGE TM COMPATIBLE Desgned for Two-Way rado
More information