Basic Guide ENG. Printer Operations. Printer Operations. Troubleshooting. Printer Relocation. Printer Driver Installation

Transcription

1 Printer Opertions 1 Lrge-Formt Printers This Bsic Guide includes three booklets. Red this mnul fi rst. Bsic Guide Printer Opertions Sfety Precutions...2 Types of mnuls...5 Documenttion Conventions...6 Prts...8 Attching the Roll Holder to Rolls...12 Loding Rolls in the Printer...14 Removing the Roll from the Printer...16 Loding Sheets in the Printer...18 Removing Sheets...20 Consumbles...21 Replcing Ink Tnks...22 Replcing the Mintennce Crtridge...26 Replcing the Printhed...30 Menu Mp...35 Troubleshooting Troubleshooting...2 If Roll Pper Jms...18 If Sheet Jms...21 If Pper is Soiled...23 If Printing is Fint...25 If Verticl Lines re Wrped or Colors re Misligned...26 If Bnding Occurs...28 If Line Length Does Not Mtch...30 Error Messges...32 Printer Reloction Prepring to Trnsfer the Printer...2 Reinstlling the Printer...6 Printer Driver Instlltion Instlling the Printer Driver (Windows)...9 Instlling the Printer Driver (Mc OS X) Convenient Printer Driver Fetures Red this mnul before ttempting to operte the printer. Keep this mnul in hndy loction for future referencing. ENG

2 Sfety Precutions Follow the wrnings nd precutions below to use the printer sfely. Do not perform ny opertions or procedures other thn s described in this mnul. Doing so my result in unexpected ccidents nd cn cuse fi re or electricl shocks. Wrning Printer loction Do not set up the printer in ny loction exposed to lcohol, thinner, or other voltile liquids. If these substnces come into contct with electricl components inside the printer, there is risk of fi re or electricl shock. Power Supply Never hndle the power cble with wet hnds. Doing so my cuse electricl shock. Insert the power cble securely nd completely into the power source. If the power cble is not inserted completely, this could cuse fi re or electricl shock. Do not use ny power cble other thn the one provided. This could cuse fi re or electricl shock. Never use the power cble with ny other electricl device. Never cut the power cble or ttempt to modify it, nd never stretch it or bend it forcefully. Never plce hevy object on the power cble. Dmged sections of the power cble could cuse short circuit nd my cuse fi re or electricl shock. Never connect the power cble to power strip or ny power source shred by other electricl devices. This could cuse fi re or electricl shock. Never knot the power cble or wrp it round itself. This could cuse fi re or electricl shock. Periodiclly disconnect the power cble nd use dry cloth to wipe wy dust tht hs collected on the plug nd the re round the power outlet. Leving the power cble plugged in nd not clened for long period, especilly in n re subject to dust, oil, nd humidity, could cuse the insultion mteril to deteriorte nd led to fi re. In n Emergency Pcemkers If the printer emits smoke or strnge odors, continuing to use the printer my cuse fi re or electricl shock. Switch the printer off immeditely nd remove the power plug from the power outlet. Contct the nerest service center. Clening the Printer For clening, use cloth dmpened in wter. Never use fl mmble solvents such s lcohol, benzene, or thinner. If these substnces come into contct with electricl components inside the printer, there is risk of fi re or electricl shock. This printer genertes low-level mgnetic fi eld. Anyone wering pcemker who experiences discomfort while working round the printer should leve the re. Consult physicin before continuing to work round the printer. 2

3 Sfety Precutions Cution Printer loction Never instll the printer on n unstble or vibrting surfce. If it flls over, this could cuse personl injury. Never set up the printer in loction tht is exposed to high humidity or lrge mounts of dust, or exposed to direct sunlight, high temperture, or open fl me. This could cuse fi re or electricl shock. Use the printer loction in n environment where temperture nd humidity re within the rnges of 15 C to 30 C (59 F to 86 F) nd 10 to 80% RH (with no condenstion). Never plce the printer on hevy wool or shg crpet. The fi bers my enter the printer nd cuse fi re. Keep the re round the power outlet cler of items so tht you cn disconnect the power cble immeditely if the printer strts operting bnormlly. In the event of printer mlfunction, remove the power cble from the outlet s soon s possible to prevent fi re nd electricl shocks. Do not instll the printer ner sources of strong electromgnetic fi elds, whether equipment tht genertes such fi elds or plces where such fi elds occur. This could dmge the printer or cuse mlfunction. Moving the Printer The weights of min printer units re s follows: ipf750 or ipf755: pprox. 52 kg (115 lb) ipf650 or ipf655: pprox. 43 kg (95 lb) Moving the printer requires t lest three people, holding it on both sides nd from behind. Be creful to void bck strin nd other injuries. When moving the printer, firmly grsp the Crrying Hndles under ech side nd in bck. Holding the printer t other positions is dngerous nd poses risk of injury nd dmge if the printer is dropped. Power Supply Alwys grip the plug to remove the power cble from the power outlet. Pulling on the power cble could dmge the cble nd led to fi re or electricl shock. Never use n extension cord. This could cuse fi re or electricl shock. Never use ny power source other thn / V AC. This could cuse fi re or electricl shock. The printer operting conditions re described below. Use the printer under the following conditions. Power supply voltge: / V AC Power supply frequency: 50/60Hz Clening the Printer Alwys disconnect the power cble from the outlet before clening the printer. If the printer is switched on ccidentlly, moving prts inside the printer my cuse personl injuries. Printhed, Ink Tnks, nd Mintennce Crtridge Alwys store consumbles in sfe loction out of the rech of smll children. If child licks or ingests ink ccidentlly, seek medicl ssistnce immeditely. If ink ccidentlly gets in your eyes, immeditely rinse with wter. If ink gets on your skin, immeditely clen it off with sop nd wter. If irrittion persists in your eyes or on your skin, contct physicin immeditely. Avoid dropping or shking printheds, ink tnks, nd mintennce crtridges. Spilled ink cn stin clothing nd the work re. Never touch the electricl contcts of the Printhed fter printing. The contcts become extremely hot nd cn cuse minor burns. 3

4 Sfety Precutions Other Never disssemble the printer or ttempt repirs. There re high voltge prts inside the printer tht cn cuse fi re or electricl shock. Never use fl mmble sprys round the printer. The gs of fl mmble sprys cn cuse fi re or electricl shock, if it contcts high voltge points inside the printer. Never insert your hnd into the printer while it is printing. Moving prts inside the printer cn cuse injuries. Never plce nything on the printer such s smll metl objects (pper clips, stples), liquids, ny type of liquid continer tht contins fl mmble liquids (lcohol, benzene, etc.). If such objects fll into the printer, this could cuse fi re or electricl shock. After removing the Cutter Unit, never touch the cutting edge (). This could cuse personl injury. To prevent fi re hzrd or dngerous electric shock, if foreign object flls into or liquid spills into the printer, press the Power button immeditely to switch the printer off, unplug the printer power cble from the outlet, nd then cll for service. If you continue to use the printer, this could cuse fi re or electricl shock. Connect the interfce cble correctly. To void dmge, before connection mke sure tht the shpe of the cble connector mtches the connection point on the printer. During printing, turn on the ventiltion system in the room. We recommend ensuring mple spce for instlltion. Trdemrks Cnon, the Cnon logo, nd imgeprograf re trdemrks or registered trdemrks of CANON INC. Microsoft nd Windows re trdemrks of Microsoft Corportion, registered in the U.S. nd other countries. Mcintosh is trdemrk of Apple Inc., registered in the U.S. nd other countries. Other compny nd product nmes in this guide re trdemrks or registered trdemrks of their respective owners. Legl Notice It is illegl to reproduce currency, bills, negotible securities nd other documents prohibited by lw. Reproduction of such items my be subject to criminl prosecution. It is illegl to reproduce legl certifi ctes, licenses, trvel tickets, nd certin public nd privte documents prohibited from reproduction by lw. Reproduction of such items my be subject to criminl prosecution. Plese note tht intellectul property protected by copyright my not be reproduced without the express permission of the copyright holder except for personl or household use under limited circumstnces. 4

5 Types of mnuls Types of mnuls Setup Guide Bsic Guide 1 (this mnul) Printer Opertions Bsic Guide 2 Troubleshooting Bsic Guide 3 Printer Reloction / Printer Driver Instlltion User Mnul (electronic mnul) Title Pper Reference Guide (electronic mnul) Instructions for unpcking nd setting up the printer, nd for instlling the printer driver Descriptions of bsic printer opertions Troubleshooting tips Detils Instructions for prepring to relocte the printer nd for softwre instlltion Detiled instructions for using the printer Informtion on pper you cn use with the printer Accessing the electronic mnuls The electronic mnuls re ccessible from imgeprograf Support Informtion. Besides the electronic mnuls, you cn lso ccess the imgeprograf website from imgeprograf Support Informtion. User Mnul The User Mnul gives detiled operting instructions for the printer, s well s troubleshooting tips in cse of printing issues. Pper Reference Guide The Pper Reference Guide identifi es the types of pper you cn use with the printer nd gives specifi ctions. Sty Informed Provides ccess to the imgeprograf website, where you cn fi nd news on vriety of printing topics nd tips on getting the most from your printer. Access imgeprograf Support Informtion s follows. Windows Double-click the ipfxxxx Support desktop icon. (xxxx indictes the printer model.) Mc OS X Click the ipf Support icon in the Dock. 5

6 Documenttion Conventions Symbols The following symbols re used in this document to indicte sfety informtion nd explntions of restrictions or precutions in use. Cution Importnt Note Indictes cution items for which operting error poses risk of injury or dmge to equipment or property. To ensure sfe use, lwys follow these precutions. Indictes importnt informtion tht must be followed when using the printer. Be sure to red this informtion to prevent printer dmge or operting errors. Indictes helpful reference informtion nd supplementl informtion on prticulr topics. Cross-reference Additionl sources of informtion re identifi ed s follows in the documenttion. In the Bsic Guides: (Guide number nd section title) In the User Mnul: (, Section title), (, Section title), (, Section title) ( "Section title," User Mnul) Text conventions nd illustrtions Button nmes nd user interfce elements Key nd button nmes on the control pnel nd user interfce elements in softwre (such s menus nd buttons) re indicted s follows in this document. Control pnel buttons Exmple: Press the button. Control pnel messges Exmple: Hed Clening is displyed. Softwre interfce items Exmple: Click. (menus nd buttons) Keybord keys Exmple: Press the Tb key. Prt nmes Nmes of printer prts re indicted s follows in this document. Printer prt nmes Exmple: Open the Top Cover. Figures nd softwre screens Instructions tht pply to the ipf650, ipf655, ipf750, nd ipf755 like re given with fi gures depicting the ipf755. Illustrtions my therefore look different from the ppernce of your printer in some cses, but bsic opertions re the sme. Screens depicted in this document for the printer driver or other softwre my look different from the ctul screens becuse of subsequent updtes. Windows XP screens re used in explntions of Windows opertions. 6

7 FCC Regultions (U.S.A) Cnon Lrge Formt Printer ipf650 ipf655 ipf750 ipf755 This device complies with Prt 15 of the FCC Rules. Opertion is subject to the following two conditions: (1) This device my not cuse hrmful interference, nd (2) this device must ccept ny interference received, including interference tht my cuse undesired opertion. Note: This equipment hs been tested nd found to comply with the limits for clss B digitl device, pursunt to Prt 15 of the FCC Rules. These limits re designed to provide resonble protection ginst hrmful interference in residentil instlltion. This equipment genertes, uses nd cn rdite rdio frequency energy nd, if not instlled nd used in ccordnce with the instructions, my cuse hrmful interference to rdio communictions. However, there is no gurntee tht interference will not occur in prticulr instlltion. If this equipment does cuse hrmful interference to rdio or television reception, which cn be determined by turning the equipment off nd on, the user is encourged to try to correct the interference by one or more of the following mesures: Reorient or relocte the receiving ntenn. Increse the seprtion between the equipment nd receiver. Connect the equipment into n outlet on circuit different from tht to which the receiver is connected. Consult the deler or n experienced rdio/tv technicin for help. Use of shielded cble is required to comply with Clss B limits in Subprt B of Prt 15 of FCC Rules. Do not mke ny chnges or modifi ctions to the equipment unless otherwise specifi ed in the mnul. If such chnges or modifi ctions should be mde, you could be required to stop opertion of the equipment. Cnon U.S.A. Inc. e Cnon Plz, Lke Success, NY 11042, U.S.A. Tel No For CA, USA ly Included bttery contins Perchlorte Mteril - specil hndling my pply. See for detil. 7

8 Prts Nmes nd functions of printer prts re s follows. Front c n o b c d q r f m e f p g s s i h l k j t t b c d e f g h i j k l m n o p q r s t Nme Roll Cover Pper Feed Slot Roll Ledge Relese Lever Control Pnel Ink Tnk Cover Pper Alignment Line Mintennce Crtridge Cover Mintennce Crtridge Cutter Unit Cutter Ril Output Try Ejection Guide Top Cover Width Guide Stnd Roll Holder Holder Stopper Roll Loding Slots Roll Holder Slot Open this cover to lod rolls. When loding pper, insert it here. When loding rolls, rest the Roll Holder here before loding it in the Roll Holder Slot. When relesing the Pper Retiner, push this lever bck. Use this pnel to operte the printer nd check the printer sttus. Open this cover to replce n Ink Tnk. Opertion An ornge line for lignment of pper. Open this cover to replce the Mintennce Crtridge. Absorbs ink used for mintennce purposes such s hed clening. (Replce the crtridge when it is full.) A round-blded cutter for utomtic roll cutting. The Cutter Unit psses over this ril to cut pper. All printed documents re ejected from this slot. Guides printed documents s they re ejected. Open this cover to instll the Printhed nd remove ny jmmed pper from inside the printer, s needed. When loding the sheets, move the guide to mtch the pper size. A stnd tht holds the printer. Equipped with csters to fcilitte moving it. (ipf750 nd ipf755 only.) Lod the roll on this holder. Secure rolls on the Roll Holder with this prt. Slide the Roll Holder long these slots. Lod the Roll Holder into this holder slot. The Stnd is provided s stndrd ccessory with the ipf750 nd ipf755. With the ipf650 nd ipf655, the Stnd is normlly offered s n option, but it my be provided s stndrd ccessory in some sles regions. 8

9 Prts Top Cover (Inside) g f b c d e b c d e f g Crrige Crrige Shft Pper Retiner Plten Borderless Printing Ink Grooves Liner Scle Nme Clening Brush Opertion Moves the Printhed. The crrige serves key role in printing. The Crrige slides long this shft. Importnt in supplying the pper. This retiner holds pper s it is fed. The Printhed moves cross the plten to print. Vcuum holes on the plten hold pper in plce. For ctching ink outside the edges of pper during borderless printing. The liner scle serves key role in detecting the Crrige position. Be creful not to touch this prt when clening inside the Top Cover or clering pper jms. When clening inside the printer under the Top Cover, use this brush to sweep wy pper dust on the Plten. Do not touch the Crrige Shft (b) or Liner Scle (f). Touching these prts my dmge them. 9

10 Prts Control Pnel r q b p c o d n e m l k j i h g f b c d e f g h i j k l m n o p q r Nme Disply Screen Dt Lmp (green) Messge lmp (ornge) Power button (green) Stop button Nvigte button button button button button button Bck button Menu button Lod button Feed button Cut button Cut Sheet lmp (green) Roll Medi lmp (green) Shows the printer menu, s well s the printer sttus nd messges. Indictes the sttus of print jobs or the printer firmwre. Lit or flshes when messges re displyed. When the lmp is off, the printer is operting normlly or turned off. Turns the printer on nd off. The power button is lit when the printer is on or in Sleep mode. Cncels print jobs in progress nd ends the ink drying period. Enbles you to check instructions for loding nd removing pper or replcing ink tnks or printheds, s well s other opertions. Press this button on the Tb Selection screen to move to nother tb. In menu items requiring numericl input, press this button to move to nother digit. Press this button when viewing menus to disply the previous menu item or setting vlue. Press this button when viewing menus to disply the next menu item or setting vlue. Press this button on the Tb Selection screen to disply the menu of the tb shown. Pressing this button in menu items of ech tb for which is displyed t left will move to the lower level of the menu item, enbling you to execute menu commnds or set menu vlues. Also press this button if the Disply Screen indictes to press the button. Press this button on the Tb Selection screen to move to nother tb. In menu items requiring numericl input, press this button to move to nother digit. Displys the screen before the current screen. Displys the Tb Selection screen. ( Opertion Press this button when loding or replcing pper. (, Loding Rolls in the Printer), (, Loding Sheets in the Printer) Pressing this button when rolls re loded enbles you to reposition the pper. Pressing this button when rolls re loded cuts the pper. Lit when sheets re selected s the pper source. Lit when rolls re selected s the pper source., Menu Mp) To recover from Sleep mode, ny button cn be pressed except the Power button. 10

11 Prts Menu opertions Nvigte nd perform menu opertions on the control pnel s follows. After the printer strts up, the Tb Selection screen is shown on the Disply Screen. Informtion is orgnized in four tbs, nd you cn press control pnel buttons to ccess menus nd set or execute items for ech tb. (, Menu Mp) Redy : Pper Menu Plin Pper ISO A2 Roll ( Pper tb ) A tb indicting sttus nd showing menus relted to pper. ( Ink tb ) ( Job tb ) ( Settings/Adj. tb ) A tb indicting sttus nd showing menus relted to ink. A tb indicting sttus nd showing menus relted to print jobs. A tb indicting sttus nd showing menus relted to settings nd djustment. Accessing tb menus To select tbs, press or on the Tb Selection screen, nd then press the button. Tb menus re now displyed. To select menu, press or, nd then press the button. The menu is selected, nd menu items re now displyed. To ccess lower-level menus for menus lbeled with select the menu nd press the button. t left, Specifying menu items Press or to select desired settings, nd then press the button. The check box t left is selected, nd the setting is confi rmed. After two seconds, the disply reverts to the upper level menu. Specifying numericl vlues Follow these steps to enter numbers. In this exmple, network settings items re entered. 1. For numericl input, press or to move the cursor (shown s n underscore) to other fi elds. 2. Press the or button to enter the vlue. 3. Repet steps 1 nd 2 to complete the settings, nd then press the button. Executing menu commnds Press or to select the ction to execute, nd then press the button. The menu commnd is now executed. Redy : Pper Menu Plin Pper ISO A2 Roll button Bck button Pper Menu Lod Pper Eject Pper Chg. Pper Type Chg. Pper Size MngeReminRoll button Bck button Pper Menu Roll Pper Cut Sheet 11

12 Attching the Roll Holder to Rolls Attch the roll holder to rolls s follows. When printing on rolls, ttch the Roll Holder to the roll. Rolls hve two- or three-inch pper core. Use the correct ttchment for the pper core. The printer comes equipped with the 2-Inch Pper Core Attchment instlled. Prts to Prepre Using rolls with 2-inch pper core 2-Inch Pper Core Attchment () Using rolls with 3-inch pper core 3-Inch Pper Core Attchment L (b) 3-Inch Pper Core Attchment R (c) b c Set the roll on tble or other fl t surfce so tht it does not roll or fll. Rolls re hevy, nd dropping roll my cuse injury. When hndling the roll, be creful not to soil the printing surfce. This my ffect the printing qulity. We recommend wering clen cloth gloves when hndling rolls to protect the printing surfce. Use scissors or cutting tool to cut the edge of the roll pper if it is uneven, dirty, or hs tpe residue. Otherwise, it my cuse feeding problems nd ffect the printing qulity. Be creful not to cut through ny brcodes printed on the roll. Align the edges of the pper on both ends of the roll. Mislignment my cuse feeding problems. For detils on supported sizes nd types of rolls, see " Pper Sizes " or the Pper Reference Guide. ( "Pper Sizes," User Mnul), ( "Types of Pper," User Mnul) To view instructions s you ttch the Roll Holder, press the Nvigte button. 1 Lift the Holder Stopper lever () from the shft side to unlock it. Holding the Holder Stopper t the position indicted (b), remove it from the Roll Holder. b 12

13 Attching the Roll Holder to Rolls 2 Insert the respective ttchments for the roll pper core on the Roll Holder nd Holder Stopper. Using rolls with 2-inch pper core Holder Stopper (Left Side) Roll Holder (Right Side) Align the tips () of the 2-Inch Pper Core Attchment with the holes (b) of the Holder Stopper nd insert it firmly. No ttchment is needed. b Using rolls with 3-inch pper core Holder Stopper (Left Side) Roll Holder (Right Side) Align the tips () of the 3-Inch Pper Core Attchment L with the holes (b) of the Holder Stopper nd insert it firmly. b Align the tips () of the 3-Inch Pper Core Attchment R with the holes (b) of the Holder Stopper nd insert it firmly. b 3 With the edge of the roll pper fcing forwrd s shown, insert the Roll Holder from the right of the roll. Insert it fi rmly until the roll touches the fl nge () of the Roll Holder, leving no gp. 4 Insert the Holder Stopper from the left in the Roll Holder s shown. Holding it t the position shown (b), push it fi rmly in until the fl nge () of the Holder Stopper touches the roll. Lock the Holder Stopper lever (c) by pushing it down towrd the shft side. c b 13

14 Loding Rolls in the Printer Lod rolls in the printer s follows. Before loding rolls, mke sure the printer is clen inside the Top Cover nd round the Ejection Guide. If these res re dirty, we recommend clening them in dvnce. (, If Pper is Soiled) 1 Press the Lod button. 2 Press or to select Lod Roll Pper, nd then press the button. If ny pper hs been dvnced tht will not be used, messge is shown requesting you to remove it. Press or to select Yes, nd then press the button. Remove the pper nd go to the next step. 3 Positioning your hnds s shown, open the Roll Cover. 4 Holding the Roll Holder fl nge (), rest the Roll Holder shft on the Roll Ledge (b). At this time, position the holder so tht the R lbel on the Roll Holder fl nge (c) is ligned with the R lbel on the printer (d), s shown. b d b c 14

15 Loding Rolls in the Printer 5 Holding the Roll Holder fl nge (), guide the holder long the Roll Loding Slots (b) on both ends, keeping the holder level s you lod it in the Roll Holder Slot. c b b c 6 Do not force the Roll Holder into the printer with the right nd left ends reversed. This my dmge the printer nd Roll Holder. Do not relese the fl nges until you lod the holder fully in the Roll Holder Slot, keeping it level. Accidentlly loding the Roll Holder crooked my dmge the printer or Roll Holder when pper is dvnced. Be creful not to pinch your fi ngers between the Roll Loding Slots (b) nd the Roll Holder shft (c) when loding rolls. Advnce the leding edge of the roll in the Pper Feed Slot () until you her tone. The printer now strts dvncing the pper, nd menu for selection of the type of pper is shown on the Disply Screen. Be creful not to soil the printing surfce of roll pper s you insert it in the slot. This my ffect the printing qulity. We recommend wering clen cloth gloves when hndling rolls to protect the printing surfce. If the pper is wrinkled or wrped, strighten it out before loding it. Lod pper stright so it is not fed skew. 7 Press or to select the type of pper, nd then press the button. For detils on types of pper to select, see the Pper Reference Guide. (, Types of Mnuls) 8 Holding it t the positions indicted, close the Roll Cover. 15

16 Removing the Roll from the Printer Remove rolls from the printer s follows. 1 the Tb Selection screen of the Control Pnel, press or to select the Pper tb ( ). Redy : Pper Menu Plin Pper ISO A2 If the Tb Selection screen is not displyed, press the Menu button Press the button. The Pper Menu is displyed. Press or to select Eject Pper, nd then press the button. Press or to select Yes, nd then press the button. The roll is now rewound nd ejected. If you hve selected MngeReminRoll > in the Control Pnel menu, brcode is printed on the leding edge of the roll. Do not remove the roll before the brcode is printed. You will be unble to keep trck of the mount of roll pper left. ( "Keeping Trck of the Amount of Roll Pper Left," User Mnul) Positioning your hnds s shown, open the Roll Cover. 16

17 6 Using both hnds, rotte the Roll Holder towrd the bck to rewind the roll. Removing the Roll from the Printer 7 Holding the Roll Holder fl nge (), remove the holder from the Roll Holder Slot. See the following procedure for instructions on removing the Roll Holder from the roll. ( "Removing the Roll Holder from Rolls," User Mnul) 8 Holding it t the positions indicted, close the Roll Cover. To lod new pper in the printer t this point, see the following procedure. (, Loding Rolls in the Printer) 17

18 Loding Sheets in the Printer Lod sheets in the printer s follows. e sheet of pper cn be loded in the Pper Feed Slot t time. Do not lod more thn one sheet t time. This my cuse pper jms. Before feeding pper or printing, mke sure the sheet is fl t ginst the Roll Cover. The sheet my jm if it curls before feeding or printing nd the triling edge drops towrd the front. Store unused pper in the originl pckge, wy from high temperture, humidity, nd direct sunlight. Pper tht is wrinkled or wrped my jm. If necessry, strighten the pper nd relod it. Lod the pper stright. Loding pper skew will cuse n error. 1 Select sheets s the pper source. If print job ws received Sheets re utomticlly selected, nd the medi type nd size specifi ed by the print job re shown on the Disply Screen. Go to the next step. If no print job ws received 1. Press the Lod button. 2. Press or to select Lod Cut Sheet, nd then press the button. If ny pper hs been dvnced tht will not be used, messge is shown requesting you to remove it. Press or to select Yes, nd then press the button. Remove the pper nd go to the next step. 2 Slide the Width Guide () to lign it with the mrk for the size of pper you will lod. 18

19 3 Lod the sheet printing-side up in the Pper Feed Slot, with the right edge ligned with the Pper Alignment Guide () to the right of the Roll Cover. Insert the pper until the leding edge mkes contct nd you her tone. Loding Sheets in the Printer 4 Move the Width Guide () crefully to mtch the size of pper loded. Set the Width Guide ginst the edge of the pper to prevent the pper from becoming crooked or wrinkled. 5 Press the button. If print job ws received The printer now strts feeding the pper. If no print job ws received A menu for selection of the type of pper is utomticlly shown on the Disply Screen. Press or to select the type of pper, nd then press the button. The printer now strts feeding the pper. For detils on types of pper to select, see the Pper Reference Guide. (, Types of Mnuls) 19

20 Removing Sheets This section describes how to remove sheets from the printer. 1 the Tb Selection screen of the Control Pnel, press or to select the Pper tb ( ). Redy : Pper Menu Plin Pper ISO A2 If the Tb Selection screen is not displyed, press the Menu button Press the button. The Pper Menu is displyed. Press or to select Eject Pper, nd then press the button. Press or to select Yes, nd then press the button. The pper is ejected from the front of the printer. Holding the pper, push the Relese Lever bck nd remove the sheet. 6 Pull the Relese Lever forwrd. 20

21 Consumbles Ink Tnks Ink tnks tht cn be used in the printer re lbeled with white letter " J " in blck circle on the side. When purchsing ink tnks, mke sure " J " is printed on the lbel, long with the following Ink Tnk seril numbers. 130 ml (4.4 fl oz.) per color MBK Ink Tnk PFI-102MBK BK Ink Tnk PFI-102BK C Ink Tnk PFI-102C M Ink Tnk PFI-104M Y Ink Tnk PFI-102Y You cn lso use ink tnks other thn M Ink Tnk PFI-104M tht re simply lbeled " A." Printhed Printhed PF-04 Mintennce Crtridge Mintennce Crtridge MC-10 21

22 Replcing Ink Tnks Replce ink tnks s follows. Comptible ink tnks 130 ml (4.4 fl oz) ink tnks cn be used for replcement. (, Consumbles) Precutions when hndling ink tnks Tke the following precutions when hndling ink tnks. There my be ink round the ink supply section of ink tnks you remove. Hndle ink tnks crefully during replcement. The ink my stin clothing. Do not instll used ink tnks in nother model of printer. Do not instll used ink tnks in nother model of printer. This will prevent correct ink level detection, which my dmge the printer or cuse other problems. We recommend using up n Ink Tnk in the course of printing within six months fter breking the sel. Printing qulity my be ffected if you use older ink tnks. Do not leve the printer without ink tnks instlled for extended periods ( month or more). Residul ink my become clogged inside the printer nd ffect printing qulity. Mke sure the printer is redy for ink tnk replcement Ink Tnk replcement is possible in the following cses. You cn replce ink tnks if the Disply Screen dvises you to check the mount of ink left or replce ink tnks. Printing : Ink Menu BK M C M Y M B B K K Printing : Ink Menu Not much ink is left. Prepre to replce the ink. If messge requests you to replce ink tnks, press the button. In this cse, go to " Remove the ink tnks " without following the instructions in " Access the menu for ink tnk replcement. " No ink left. Replce ink tnk. M BK C M Y M B B K K Do not remove n Ink Tnk during initiliztion immeditely fter turning on the printer, or during printhed clening. Ink Tnk replcement is possible even during printing, when print jobs re being cnceled, or when pper is being dvnced. 22

23 Replcing Ink Tnks Access the menu for ink tnk replcement This step is not necessry if messge requests you to replce ink tnks. Check the messge on the Disply Screen nd press the button. Remove the Ink Tnk t this point. 1 the Tb Selection screen of the Control Pnel, press or to select the Ink tb ( ). Printing : Ink Menu BK M C M Y M B B K K If the Tb Selection screen is not displyed, press the Menu button. 2 3 Press the button. The Ink Menu is displyed. Press or to select Rep. Ink Tnk, nd then press the button. A messge on the Disply Screen requests you to open the Ink Tnk Cover. Remove the Ink Tnk t this point. Remove the ink tnks 1 Open the Ink Tnk Cover nd check ink lmps. Ink lmps fl sh when there is little ink left. 2 Press the tip of the Ink Tnk Lock Lever of the color for replcement horizontlly nd lift the Ink Tnk Lock Lever to open it. 23

24 Replcing Ink Tnks 3 Hold the Ink Tnk by the grips nd remove it. Press the button. If there is still ink in the Ink Tnk you removed, store it with the ink holes () fcing up. Otherwise, ink my lek nd cuse stins. Put the Ink Tnk in plstic bg nd sel it. Instll the ink tnks 1 Before opening the pouch, gently gitte the Ink Tnk once or twice. Agitte the ink in the Ink Tnk by slowly rotting the Ink Tnk upside-down nd right side up repetedly. Do not remove nd gitte ink tnks tht hve lredy been instlled in the printer. Ink my lek out. If you do not gitte the Ink Tnk, the ink my settle, which my ffect printing qulity. 2 Open the pouch nd remove the Ink Tnk. Never touch the ink holes or electricl contcts. This my cuse stins, dmge the Ink Tnk, nd ffect printing qulity. 24

25 3 Press the button nd insert the Ink Tnk into the holder fcing s shown, with the ink holes down. Replcing Ink Tnks Ink tnks cnnot be loded in the holder if the color or orienttion is incorrect. If the Ink Tnk does not fi t in the holder, do not force it into the holder. Mke sure the color of the Ink Tnk Lock Lever mtches the color of the Ink Tnk nd check the orienttion of the Ink Tnk before reloding it. 4 Push the Ink Tnk Lock Lever closed until it clicks into plce. 5 Mke sure the Ink Lmp is lit in red. If the Ink Lmp is not lit, relod the tnk. 6 Close the Ink Tnk Cover. 25

26 Replcing the Mintennce Crtridge Replce the Mintennce Crtridge s follows. Comptible mintennce crtridges Use Mintennce Crtridge MC-10. Precutions when hndling the mintennce crtridge Tke the following precutions when hndling the Mintennce Crtridge. To prevent ink from leking from used Mintennce Crtridge, void dropping the crtridge or storing it t n ngle. Otherwise, ink my lek nd cuse stins. Ink dheres to the top of the Mintennce Crtridge fter it hs been used. Hndle the Mintennce Crtridge crefully during replcement. The ink my stin clothing. Do not remove the Mintennce Crtridge except to replce it. Mke sure the printer is redy for mintennce crtridge replcement Mintennce Crtridge replcement is possible in the following cses. You cn replce Mintennce Crtridge if the Disply Screen dvises you to check the remining cpcity or replce the Mintennce Crtridge. Printing :Setting/Adj. Menu Mint. crt. The level is low If messge requests you to replce the Mintennce Crtridge, go to " Replce the mintennce crtridge " without following the instructions in " Access the menu for mintennce crtridge replcement. " Mintennce crtridge full. Puse MintCrt, Replce the keeping it level. Puse Do not replce the Mintennce Crtridge during initiliztion immeditely fter turning on the printer, during Printhed clening, or when ink is being bsorbed. Ink my lek out. 26

27 Access the menu for mintennce crtridge replcement Replcing the Mintennce Crtridge 1 the Tb Selection screen of the Control Pnel, press or to select the Settings/Adj. tb ( ). Printing :Setting/Adj. Menu Mint. crt. The level is low If the Tb Selection screen is not displyed, press the Menu button Press the button. The Set./Adj. Menu is displyed. Press or to select Mintennce, nd then press the button. Press or to select Repl. Mint. C, nd then press the button. A messge on the Disply Screen dvises you to open the Mintennce Crtridge Cover. Replce the mintennce crtridge 1 Open the box, remove the plstic bg nd pckging mteril, nd tke out the Mintennce Crtridge. Never touch the metl contcts (). This my dmge the Mintennce Crtridge. 27

28 Replcing the Mintennce Crtridge 2 At this point, open the Mintennce Crtridge Cover. 3 Hold the used Mintennce Crtridge by the grip () with one hnd nd put your other hnd under the Mintennce Crtridge to hold it fi rmly on the bottom, keeping it level s you pull it out. Used mintennce crtridges re hevy. Alwys grsp the crtridge fi rmly nd keep the crtridge level during removl nd storge. If you drop used Mintennce Crtridge or store it t n ngle, ink my lek nd cuse stins. The remining Mintennce Crtridge cpcity is recorded on ech printer. Do not instll used Mintennce Crtridge in nother printer. 4 5 Keep the used mintennce crtridge level s you put it in the plstic bg. Expel excess ir from the plstic bg nd sel the zipper. Confi rm the Mintennce Crtridge is right-side up, put it in the box, ttch the pckging mteril, nd store it so tht it stys level. Alwys put the used Mintennce Crtridge bck in the box nd store the box on fl t surfce. Otherwise, ink my lek nd cuse stins. 6 Keeping the new Mintennce Crtridge level, insert it ll the wy in. 28

29 7 Close the Mintennce Crtridge Cover. Replcing the Mintennce Crtridge 8 Press the button. The printer now initilizes the Mintennce Crtridge. 29

30 Replcing the Printhed Replce the Printhed s follows. When to replce the printhed Replce the Printhed in the following situtions. If the printing qulity does not improve even fter one or two cycles of Hed Clening B from the printer menu If the Disply Screen indictes Open top cover nd replce the printhed. If your Cnon deler hs dvised you to replce the Printhed Comptible printheds Use Printhed PF-04. Precutions when hndling the printhed Tke the following precutions when hndling the Printhed. There my be ink round the nozzles of the Printhed you remove. Hndle the Printhed crefully during replcement. The ink my stin clothing. Do not open the Printhed pouch until immeditely before instlltion. After removing the Printhed from the pouch, instll it right wy. If the Printhed is left fter the pouch is opened, the nozzles my dry out, which my ffect printing qulity. Access the menu for printhed replcement When replcing the Printhed immeditely fter printing, wit few minutes before replcing it. The metl prts of the Printhed become hot during printing, nd there is risk of burns from touching these prts. Prepre new Ink Tnk when ink levels re low. Your hnds my become dirty during Printhed replcement. Use the gloves provided with the new Printhed for replcement. 1 2 If the roll is not ejected becuse of the cutting method selected, cut it mnully nd remove it. ( "Cutting Roll Pper After Printing," User Mnul) Clen inside the Top Cover. (, If Pper is Soiled) 30

31 3 the Tb Selection screen of the Control Pnel, press or to select the Settings/Adj. tb ( ). Redy :Setting/Adj. Menu Mint. crt. Remining Amount Replcing the Printhed If the Tb Selection screen is not displyed, press the Menu button Press the button. The Set./Adj. Menu is displyed. Press or to select Mintennce, nd then press the button. Press or to select Replce P.hed, nd then press the button. Ink is now fi lled. After bout two minutes, messge is shown on the Disply Screen instructing you to open the Top Cover. Replce the printhed 1 Open the Top Cover. Instructions re now shown on the Disply Screen regrding Printhed replcement. During Printhed replcement, do not move the Crrige from the position indicted. If you ccidentlly move the Crrige, you will her wrning tone, nd Printhed replcement is no longer possible. If you move the Crrige by mistke, close the Top Cover. The Crrige will be moved to the position s indicted. 31

32 Replcing the Printhed 2 If the Printhed Fixer Cover or Printhed Fixer Lever is dirty, use dmp cloth tht you hve wrung out completely to wipe it clen. Never touch the metl contcts of the Crrige. This my dmge the printer. 3 Pull the Printhed Fixer Lever forwrd ll the wy to open it completely. 4 Pull up the Printhed Fixer Cover to open it completely. 5 Remove the Printhed nd press the button. Dispose of the used Printhed in ccordnce with locl regultions. 32

33 6 Holding the new Printhed by the grips (), remove it from the pouch. Replcing the Printhed When hndling the Printhed, lwys hold it by the grips (). Never touch the nozzles (b) or metl contcts (c). This my dmge the Printhed nd ffect printing qulity. Never touch the ink supply section (d). This my cuse printing problems. d c If you need to put Printhed somewhere temporrily before instlltion, do not keep the nozzles nd metl contcts fcing down. If the nozzles or metl contcts re dmged, it my ffect the printing qulity. b 7 While fi rmly holding the Printhed you hve removed, use your other hnd to remove the ornge Protective Prt (). Squeeze the grips (c) of Protective Prt (b) nd pull it down to remove it. b c The inside surfce of the Protective Prts () nd (b) is coted with ink to protect the nozzles. Be creful not to touch these surfces when removing the cps. The Printhed contins ink to protect the nozzles. We recommend removing Protective Prt (b) s you hold it over the Printhed pckge or sfely out of the wy to void spilling ink nd stining your clothes or the surrounding re. If ink ccidentlly spills, wipe off the ink with dry cloth. Do not rettch the Protective Prt or protective mteril. Dispose of these mterils in ccordnce with locl regultions. 33

34 Replcing the Printhed 8 With the nozzles fcing down nd the metl contcts towrd the bck, insert the Printhed into the Crrige. Crefully push the printhed fi rmly into the Crrige, ensuring tht the nozzles nd metl contcts do not touch the crrige. 9 Pull the Printhed Fixer Cover down towrd the front to lock the Printhed in plce. 10 Push the Printhed Fixer Lever towrd the bck of the printer until it clicks. 11 Close the Top Cover. Ink now fi lls the system. It tkes bout six minutes for ink to fi ll the system. Never remove n Ink Tnk while the system is fi lling with ink. After the Printhed hs been replced nd fi lled with ink, Hed Posi. Adj. ( Auto(Advnced) ) is performed if you hve selected Rep.P.hed Print > in the Control Pnel menu. In this cse, follow the instructions displyed for Printhed djustment. If Rep.P.hed Print is, perform Hed Posi. Adj. ( Auto(Advnced) ) yourself. (, If Verticl Lines re Wrped or Colors re Misligned) 34

35 Menu Mp The structure of Tb Selection screen menus on the control pnel is s follows. Vlues t right lbeled with n sterisk () re the defults. For detils on settings vlues, refer to the User Mnul. To ccess tb menus, press the Menu button to disply the Tb Selection screen, press or to select the tb, nd then press the button. Pper Menu Bck Bck Bck Lod Pper Eject Pper Chg. Pper Type 1 Chg. Pper Size MngeReminRoll Pper Detils Pper Detils Roll Pper Cut Sheet Roll Pper Cut Sheet Sheet Size Roll Length 3 Roll Width 4 1 (The pper type is displyed here.) (The pper type is displyed here.) (The pper type is displyed here.) (The pper size is displyed here.) Hed Height Skew Check Lv. Cutting Mode Cut Speed Trim Edge First CutDustReduct. VcuumStrngth Scn Wit Time Roll DryingTime NerEnd RollMrgn NerEnd Sht Mrgn Bordless Mrgin A B C D E Automtic Eject Mnul Fst Stndrd Slow Automtic 3mm 20mm 3mm 20mm Automtic Fixed A B C D E Automtic Highest High Stndrd Low Lowest Super Low High Accurcy Stndrd Loose Automtic Strongest Strong Stndrd Wek Wekest 1 sec. 3 sec. 5 sec. 7 sec. 9 sec. 30 sec. 1 min. 3 min. 5 min. 10 min. 30 min. 60 min. Keep Pper Type Width Detection Return Defults 1: For informtion on the types of pper the printer supports, refer to the Pper Reference Guide. The pper type setting in the printer driver nd relted softwre (s well s on the Control Pnel) is updted when you instll the printer driver from the User Softwre CD-ROM or if you chnge pper informtion by using the Medi Configurtion Tool. 2: For informtion on the sizes of pper the printer supports, refer to the User Mnul. ( "Pper Sizes," User Mnul) 3: Avilble only if MngeReminRoll is. 4: Avilble only if Width Detection is set to. Ink Menu Rep. Ink Tnk Hed Clening A Job Menu Bck Bck Bck Bck Print Job 1416 Stored Job : Avilble only on the ipf : Avilble only on the ipf655. Job List Milbox List (Select Print Job.) (Enter pssword if one hs been set.) 35 Delete Preempt Jobs 18 Job List Print Job List 18: Print Anywy is displyed when job being held is selected. Print Delete

36 Menu Mp Bck Bck Bck Bck Job Log Print Job Log Puse Print HDD Informtion 1416 (Choose from informtion bout the ltest three print jobs.) Totl cpcity Box free spce Document Nme User Nme Pge Count Job Sttus Print Strt Time Print End Time Print Time Print Size Medi Type Interfce Ink Consumed F CANCELED yyyy/mm/dd hh:mm:ss yyyy/mm/dd hh:mm:ss xxxsec. xxxxxxxxsq.mm (Indictes the ink color.) xxx.xxx ml F 1416 USB Network HDD Set./Adj. Menu Bck Bck Bck Bck Bck Bck Bck Test Print Adjust Printer Mintennce GL2 Replot 1517 GL2 BufferCler 1517 GL2 Settings G Hed Posi. Adj. Hed Inc. Adj. Feed Priority Adj. Fine Feed 6 Hed Clening Nozzle Check Replce P.hed Repl. mint crt Hed Info Qulity Mnger 5 Auto(Stndrd) Auto(Advnced) Mnul Adj. Priority Adj. Qulity 6 Adjust Length 7 Hed Clening A Hed Clening B ProductNme: s/n: Dys elpsed: Count [Mdot]: Color Mode Print Qulity Input Resolution Automtic Print Qulity Print Length Auto(GenuinePpr) Auto(OtherPper) Mnul AdjustmentPrint Chnge Settings Monochrome Color (CAD) 1 Color (CAD) 2 Color (CAD) 3 Color (CAD) 4 Color (CAD) 5 Fst Stndrd High 600dpi 300dpi A:High B:Stndrd/Drft A:High B:Stndrd/Drft G H Nozzle Check Sttus Print Interfce Print GL2 Set Print Pper Detils Print Job Log Menu Mp Color Plette Softwre Plette A Plette B Fctory Print (Economy) Pper Mnger Pper Source Automtic Roll Pper Cut Sheet Line & Pen Mnger Mrgin Conserve Pper Auto Rotte Nesting 1416 Enble merge 3mm(Stndrd) 5mm Use Nesting Nesting WitTime 8 Cut Lines 8 xx min. Pen Setup Select Plette H Define Plette Plette A (Choose pen number.) Width Color (Indictes the Width vlue.) b c d e f 5: 6: 7: Avilble fter Auto(Advnced) in Hed Posi. Adj. hs been used once. Avilble when you hve specified Feed Priority > Adj. Priority > Automtic or Print Qulity. Avilble when you hve specified Feed Priority > Adj. Priority > Automtic or Print Length. 8: Avilble only if Use Nesting is set to. 14: Avilble only on the ipf : Avilble only on the ipf : Avilble only on the ipf : Avilble only on the ipf650. Line Attributes No Setting Circle Setting 36

37 Menu Mp b Bck Bck Bck c d e f Bck Bck Bck Bck Smoothing ThickenFineLines Reset Plette Softwre Smooth Plette B Fctory All Plette Plette A Plette B (Choose pen number.) (Choose pen number.) (Indictes Width, Color, nd Line Attributes.) (Indictes Width, Color, nd Line Attributes.) (Specify the vlues of Width, Color, nd Line Attributes.) ProcessingOption AdjustFintLines Wrning -the-fly 1416 PgeSizeProcess1 Interfce Setup GL2 Set Print EOP Timer 20 TCP/IP 20 I PgeSizeProcess2 IPv4 IPv4 Mode Automtic Mnul Protocol DHCP 9 BOOTP RARP IPv4 Settings IP Address xxx.xxx.xxx.xxx 21 Subnet Msk xxx.xxx.xxx.xxx Defult G/W xxx.xxx.xxx.xxx IPv6 IPv6 Support IPv6 StlessAddrs NetWre 20 AppleTlk 20 Ethernet Driver NetWre Frme Type Print Service Auto Detect Comm.Mode Ethernet Type Spnning Tree J DHCPv6 BinderyPServer RPrinter NDSPServer NPrinter Hlf Duplex Full Duplex 10 Bse-T 100 Bse-TX 1000 Bse-T Not Use Use I J 10 sec. 30 sec. 1 min. 2 min. 5 min. 10 min. 30 min. 60 min. Auto Detect Ethernet 2 Ethernet Ethernet Ethernet SNAP MAC Address g Interfce Print 20 Return Defults 20 9: Not shown if you hve set IPv4 Mode to Mnul. 10: Not shown if you hve set NetWre to. 14: Avilble only on the ipf755 16: Avilble only on the ipf655 19: Not shown if you hve set Auto Detect to. 20: Viewing nd configurtion is possible for dministrtors, nd only viewing for other users. 21: Viewing nd configurtion is possible for dministrtors only. 37

38 Menu Mp g Bck Bck Bck Bck System Setup Sleep Timer Buzzer Contrst Adj. -4,-3,-2,-1,0,+1,+2,+3,+4 K Dte & Time 20 Dte Formt 20 Lnguge Time Zone 20 Length Unit Detect Mismtch Pper Size Bsis Keep Pper Size L M Dte yyyy/mm/dd dd/mm/yyyy mm/dd/yyyy meter feet/inch Puse Wrning None Hold Job 1416 Roll Selection 1 Roll Selection 2 12 yyyy/mm/dd Time ISO A3 (297mm) 300mm Roll 10inch (254mm) JIS B4 (257mm) K L hh:mm 5 min. 10 min. 15 min. 20 min. 30 min. 40 min. 50 min. 60 min. 240 min. English Frnçis Itlino Deutsch Espñol Prep.MovePrinter TrimEdge Relod Rep.P.hed Print Nozzle Check Use RemoteUI 20 Reset PprSetngs 20 Erse HDD Dt 1416 Output Method 1416 Print After Recv Sve: Shred Box Automtic Frequency Wrning High Speed 20 Secure High Spd. 20 Secure 20 Print Print (Auto Del) Sve: Box XX M Stndrd 1 pge 0:London(GMT) +1:Pris,Rome +2:Athens,Ciro +3:Moscow +4:Eerevn,Bku +5:Islmbd +6:Dcc +7:Bngkok +8:Hong Kong +9:Tokyo,Seoul +10:Cnberr +11NewCledoni +12:Wellington -12:Eniwetok -11:Midwy is. -10Hwii(AHST) -9:Alsk(AKST) -8:Oregon (PST) -7:Arizon(MST) -6:Texs(CST) -5:NewYork(EST) -4:Sntigo -3:Buenos Aires -2-1:Cpe Verde Admin. Menu 20 Printer Info Chnge Pssword 21 Init.Admin.Pswd 21 N N Pper Info Ink Info Hed Info System Info Error Log Other Counter 12: Follows the setting in Dte Formt. 14: Avilble only on the ipf755 15: Avilble only on the ipf750 16: Avilble only on the ipf655 17: Avilble only on the ipf650 20: 21: Viewing nd configurtion is possible for dministrtors, nd only viewing for other users. Viewing nd configurtion is possible for dministrtors only. Menu When Printing Press the Menu button when printing is pused to disply this menu. Set./Adj. Menu Adj. Fine Feed Printer Info Bck 13 Pper Info Ink Info Hed Info System Info Error Log Other Counter 13: Avilble when you hve specified Feed Priority > Adj. Priority > Automtic or Print Qulity. The sme menus s usul re shown in nd (Job Menu). 38 (Ink Menu)

39 Index Numerics 2-Inch Pper Core Attchment Inch Pper Core Attchment...12 c Crrige...9, 31, 32 d Disply Screen...10 e Ejection Guide...8 Electronic mnuls (User Mnul)...5, 6 r Relese Lever...8 Roll Holder...8, 12 Roll Holder Slot...8 Roll loding...14 Roll removl...16 s Sheet loding...18 Sheet removl...20 t Top Cover...8, 9 f Flnge...13 h Holder Stopper...8, 12 i imgeprograf Support Informtion...5 Ink Lmp...23, 25 Ink Tnk Cover...8, 23, 25 Ink Tnk Lock Lever...23, 25 Ink tnk replcement...22 Ink tnks...21, 22 m Mintennce Crtridge...8, 21, 26 Mintennce Crtridge Cover...8 Mintennce crtridge replcement...26 Menu mp (menu structure)...35 p Pper Alignment Line...8 Pper Feed Slot...8, 15 Pper Reference Guide...5 Pper Retiner...9 Plten...9 Printhed...21, 30 Printhed replcement...30

40 Cnon Inc. 30-2, Shimomruko 3-chome, Oht-ku, Tokyo , Jpn Cnon U.S.A., Inc. e Cnon Plz, Lke Success, NY U.S.A Cnon Europ N.V. Bovenkerkerweg XB Amstelveen The Netherlnds Cnon (Chin) Co., Ltd. 15F Jinbo Building No.89 Jinbo Street, Dongcheng District, Beijing , Chin Cnon Austrli Pty. Ltd. 1 Thoms Holt Drive, North Ryde, Sydney, N.S.W.2113, Austrli Q T V 1 QT V1 CANON INC Printed in JAPAN