Advanced and. Electronic Metering. Advanced and Electronic Metering Contents

Transcription

1 November 0 Sheet Advanced and Electronc Meterng Contents General Descrpton Selecton Chart Eaton Advanced Meters Power Xpert Meter 000/000/000 Seres Power Xpert Meter 000 Seres Power Xpert Energy Vewer IQ 0/0 Seres IQ 0/0/0 Seres Eaton Submeter Overvew IQ M IQ 0S/0S Power Xpert Mult-Pont Meter IQ Energy Sentnel Molded-Case Crcut Breaker Power Montorng and Meterng Module (PM) Eaton Electronc Meters IQ Analyzer 000 Seres Accessores IQ Flange Panel Mountng Adapter Kt for IQ 00/00 Seres and PXM 000 Meters Sub-Network Master Local Dsplay (SMLD) Enclosed Meters Current Transformers Specfcatons See Eaton s Product Specfcaton Gude, avalable on CD or on the Web. CSI Format Secton 0 Secton. Power Xpert Meter 000/000/000 Seres Paragraph.0.A Paragraph.0.A Power Xpert Meter 000 Seres..... Paragraph.0.B Paragraph.0.B IQ 0/0 Seres Paragraph.0.E Paragraph.0.E IQ 00 Seres Paragraph.0.D Paragraph.0.D IQ Energy Sentnel Paragraph.0.G Paragraph.0.G IQ M Paragraph.0.I Paragraph.0.I Breaker Power Montorng and Meterng Module Paragraph.0.J Paragraph.0.J IQ 0S/0S Paragraph.0K Paragraph.0K Power Xpert Mult-Pont Meter Paragraph.0L Paragraph.0L Meterng Products Famly 0 0 CA0000E For more nformaton, vst:

2 .0- Overvew General Descrpton November 0 Sheet General Descrpton Eaton s meterng products provde solutons needed to montor and manage all aspects of an electrcal dstrbuton system. When seekng greater relablty, ncreased productvty and sgnfcant cost savngs to reman compettve n today s market, Eaton s meterng products ft the bll. These nnovatve meters and communcatons systems, along wth Power Management software, make t possble to successfully take control of the electrcal dstrbuton system. Power Xpert Meters Power Xpert Meters are the benchmark for ntellgent Web-enabled topqualty meterng devces for the power chan. Power Xpert Meters provde measurement of the crtcal elements found n the power chan whether that be voltage, power, current, transents, harmoncs or even tme. Power Xpert Meters provde Web-enabled hgh defnton communcatons for use wth the Power Xpert Software. All Power Xpert Meters provde a standard communcatons protocol for easy ntegraton nto other systems. Greater Relablty Eaton meterng products permt recevng an early warnng of potental problems, elmnate unnecessary trps, solate faults to ensure mnmum downtme and shed or equalze loads whle a problem s beng corrected. Increased Productvty Equpment downtme resultng from voltage or frequency varatons can be very costly to an operaton. Montorng power qualty wth Eaton s meterng products throughout the electrcal dstrbuton system provdes data to dentfy, solate and correct problems quckly and effcently. Reduced Energy and Operatng Costs When we thnk about meters and power qualty, the common thread throughout the basket of solutons s nformaton. Collectng, montorng, and managng data from the electrcal dstrbuton system can help reduce costs for those facltes prepared to defne and analyze present electrcal energy usage levels and patterns. Data provded by Eaton meterng products comprse the data for verfyng utlty blls for energy management and lowerng operatng costs. Deregulaton n some geographcal locatons permts energy users to select a utlty provder and negotate rate structures. For large users wth heavy utlty blls ths may be an ncentve to verfy the utlty bll, dentfy an opportunty for savngs, negotate a better utlty rate, and apply the savngs drectly to the bottom lne. Users are also empowered to decrease energy consumpton, thereby lowerng peak demand charges and decreasng operatng costs. Meterng Products Famly When an Eaton meter s used wth Eaton trp unts and relays ncorporatng bult-n meterng capabltes, the entre electrcal dstrbuton system can be cost-effectvely managed. Eaton s an ndustry leader offerng a complete ntegrated soluton to oversee your entre electrcal dstrbuton system. As a global manufacturer of low and medum voltage electrcal dstrbuton system equpment and components, Eaton s an experenced nnovator of Meterng Products that ncorporate leadng-edge technology. These nnovatons result from our scentfc and engneerng expertse, physcal resources and the ongong R&D programs at our technology centers. For more nformaton, vst: CA0000E

3 November 0 Sheet 000 Overvew Selecton Chart.0- Table.0-. Meterng Selecton ChartDmensons n Inches (mm) Devce Name Power Xpert Meter 000/000/000 Seres Power Xpert Meter 000 Seres Accessores See Page.- IQ 0/0 Seres Secton Page Number Electrcal Parameters Volts Amperes Current range (% of nomnal) Watts VARs VA PF-apparent PF-dsplacement Frequency THD-voltage THD-current Watthours VAR-hours VA-hours Ampere-demand Watt-demand VAR-demand VA-demand Revenue accuracy Indvdual ampere harmoncs Indvdual voltage harmoncs 0.% of RV 0.0% FS 0.0% of RV 0.0% FS A (00%) 0.% of RV 0.00% FS 0.% of RV 0.00% FS 0.% of RV 0.00% FS 0.% 0.% ±0.0 Hz th th ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class 0.0% of RV 0.0% FS ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class th th Under typcal operatng condtons. PXM 0 only. PXM 0 only. PXM 0 only. PXM 0 only. IQ 0 only. Indvdual values reported to th harmonc; ant-alas flterng prevents hgher frequences from dstortng readngs (see IEC 000--). 0.% of RV 0.% of RV 0. 00% 0.% of RV 0.% of RV 0.% of RV 0.% of RV ±0.0 Hz 0th 0th ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ANSI C.0 (0.%) 0th 0th Interharmoncs Yes Mnmum and/or Maxmum Values Volts Current Power Power factor Frequency THD Demand values Trend analyss Event loggng Dsturbance recordng Other Features L-L, L-N, N-G, VAUX L-L A, B, C, N, G Watt, VAR, VA Apparent/dsplacement Hertz Amperes/volts (L-L, L-N, AUX L-L) kw, kvar, kva, amperes / / GB / / GB / / GB, 0 cycles per event L-L, L-N A, B, C, N Watt, VAR, VA Apparent Hertz Amperes/volts kw, kvar, kva, amperes / / MB 00,000 alarms/events wth tmestamp MB, up to cycles per event PXM 000 only. PXM 000 only. At computer only. Optonal. The auxlary voltage opton adds three addtonal voltage nput channels to Power Xpert Meters. Usng <0 VA meter sourced V power. 0.% of RV 0.% of RV 0. 00% 0.% of RV 0.% of RV 0.% of RV 0.% of RV ±0.0 Hz 0th 0th ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ANSI C.0 (0.%) L-L, L-N A, B, C Watt, VAR, VA Apparent Hertz Amperes/volts kw, kvar, kva, amperes KB Storage / / GB / / MB KB for loggng, up to parameters every mnutes for 0 days PG output relays PG analog outputs Dscrete contact nputs Analog nputs maxmum Optonal () Form C, A or () Form A, 0 ma Optonal () 0 ma or () 0 ma Optonal () or () Synch-nput kw utlty Va status nput Va end of nterval pulse wth optonal dgtal nputs Auxlary voltage Yes kwh pulse ntator Waveform dsplay Waveform capture, samples/cycle Frequency dstrbuton dsplay Dsplay type Dsplay lnes/character Dsplay character heght Communcatons Yes Local/computer Yes, LCD Graphc (0 x 0 pxels). mm H x mm W Seral: Modbus RTU, Modbus ASCII, Network: Modbus TCP, Ethernet TCP/IP, HTTP, SNMP, SMTP, FTP, DNP.0 Yes Yes, up to, up to Red LED lnes, characters 0. (.) H Seral: Modbus RTU, Modbus ASCII, DNP.0 Network: Modbus TCP, BACnet/IP, Ethernet TCP/IP, HTTP, HTTPS, SNMP, SMTP, Waveform FTP Optonal () Form C, A or () Form A, 0 ma Optonal () 0 ma or () 0 ma Optonal () or () Va end of nterval pulse wth optonal dgtal nputs Yes Red LED lnes, characters 0. (.) H Seral: Modbus RTU, Modbus ASCII, DNP.0 Network: Modbus TCP va Power Xpert Gateway Setup confguraton Va Web browser/dsplay Va Web browser/dsplay Va confguraton software/dsplay Dmensons nches (mm) Meter:. (.0) H x. (0.) W x. (0.) D Operatng temperature range Reference lterature Dsplay:.0 (.) H x.0 (.) W x. (.) D 0 to 0 C dsplay unt 0 to 0 C meter base unt TD0000E. (.) H x. (.) W x. (.) D (see Page.-) 0 to 0 C TD000E. (.) H x. (.) W x. (.) D (see Page.-) 0 to 0 C TD000E Legend: PG = Programmable FS = Full scale RV = Read value Auxlary Voltage (Optonal) = Provdes three addtonal voltage nputs to the meter: Va, Vb, Vc. Interharmoncs = Power Xpert Meter 000/000 supported. 0 0 CA0000E For more nformaton, vst:

4 .0- Overvew Selecton Chart November 0 Sheet Table.0-. Meterng Selecton ChartDmensons n Inches (mm) (Contnued) Devce Name IQ Analyzer 000 Seres IQ DP-000 Seres IQ 0 Seres Accessores See Page.- Secton Page Number.- Electrcal Parameters Volts Amperes Current range (% of nomnal) Watts VARs VA PF-apparent PF-dsplacement Frequency THD-voltage THD-current Watthours VAR-hours VA-hours Ampere-demand Watt-demand VAR-demand VA-demand Revenue accuracy Indvdual ampere harmoncs Indvdual voltage harmoncs ±0.% FS ±0.% FS 00% 0.% FS, RV 0.% FS, RV 0.% FS, RV 0.% FS 0.% FS 0.0% or 0.0 Hz 0th 0th 0.% RV % RV 0.% RV ±0.% FS ±0.% FS ±0.% FS ±0.% FS ANSI C.0 (0.%) 0th 0th From 00% of FS. At unty power factory and 00% of FS. At a power factor < ±0. and 00% of FS. At computer only. Relays programmable to operate on any measured functon. ±0.% FS ±0.% FS 0 0% ±0.% FS ±0.% FS ±0.% FS ±.0% FS ±.0% FS ±0.% FS st st ±0.% FS ±0.% FS ±0.% FS ±0.% ±0.% ±0.% ±0.% Interharmoncs Mnmum and/or Maxmum Values Volts Current Power Power factor Frequency THD Demand values Trend analyss Event loggng Dsturbance recordng Other Features L-L, L-N A, B, C, N, G Watt, VAR, VA Apparent/dsplacement Hertz Amperes/volts All Tme/date 0 events w/tmestamp 0 waveform events L-L, L-N A, B, C Watt, VAR, VA Apparent/dsplacement Hertz Amperes/volts All Alarms Storage 0 kb Parameters PG output relays PG analog outputs Dscrete contact nputs Analog nputs () 0A Form C () 0 0/ 0 ma () 0 Vdc Dfferental () 0 0/ 0 ma () 0A Form C () kw Demand Optonal. The auxlary voltage opton adds three addtonal voltage nput channels to Power Xpert Meters. An IPONI s requred. IQ 0M only. Dmensons n mm = 0. W x. H x. D ±0.% FS ±0.% FS 00% ±.0% FS ±.0% FS ±.0% FS ±.0% FS ±.0% FS ±0.% Hz ±.0% per ANSI C ±.0% per ANSI C ±.0% per ANSI C ±0.% per ANSI C ±.0% per ANSI C ±.0% per ANSI C ±.0% per ANSI C ANSI C. (%) L-L, L-N A, B, C Watt, VAR, VA Apparent/dsplacement Hertz All () 00 ma Form A () 0 Vdc dfferental () 0 ma Synch-nput kw utlty At devce or va communcatons At devce or va communcatons Va communcatons only Auxlary voltage kwh pulse ntator Waveform dsplay Waveform capture, samples/cycle Frequency dstrbuton dsplay Yes Local /computer Yes, Local /computer Yes Yes Dsplay type Dsplay lnes/character Dsplay character heght Graphc LCD wth LED backlght lnes, characters Up to Lnes Segment LED lne, characters lne Backlt LCD lnes, 0 characters.0 (0.) H x 0.0 (.) W Communcatons Seral: INCOM Network: va Power Xpert Gateway Seral: INCOM Network: va Power Xpert Gateway Seral: INCOM, Modbus RTU Network: va Power Xpert Gateway Setup confguraton Va confguraton software/dsplay Va confguraton software/dsplay Va confguraton software/dsplay Dmensons nches (mm) Operatng temperature range Reference lterature.0 (0.) W x 0.0 (.) H x.0 (.) D 0 to 0 C TD0BTE.0 (0.) W x 0.0 (.) H x.0 (.) D 0 to 0 C TD0ATE Refer to TD..0.T.E. (see Page.-) 0 to 0 C TD0TE Legend: PG = Programmable FS = Full scale RV = Read value Auxlary Voltage (Optonal) = Provdes three addtonal voltage nputs to the meter: Va, Vb, Vc. Interharmoncs = Power Xpert Meter 000/000 supported. For more nformaton, vst: CA0000E

5 November 0 Sheet 000 Overvew Selecton Chart.0- Table.0-. Meterng Selecton ChartDmensons n Inches (mm) (Contnued) Devce Name IQ 0/0/0 Seres IQ M IQ 0S/0S Seres Accessores See Page.- Secton Page Number Electrcal Parameters Volts Amperes Current range (% of nomnal) Watts VARs VA PF-apparent PF-dsplacement Frequency THD-voltage THD-current Watthours VAR-hours VA-hours Ampere-demand Watt-demand VAR-demand VA-demand Revenue accuracy Indvdual ampere harmoncs Indvdual voltage harmoncs 0.% of RV 0.% of RV 0. 00% 0.% of RV 0.% of RV 0.% of RV 0.% of RV ±0.0 Hz ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ANSI C.0 (0.%) Dmensons nches (mm). (.) H x. (.) W x. (.) D (see Page.-) Operatng temperature range 0 to 0 C Reference lterature TD000E IQ 0/0. IQ 0 only. At computer only. Optonal. IQ 0S only. The auxlary voltage opton adds three addtonal voltage nput channels to Power Xpert Meters. 0.% 0.0% per C devaton from C 0.% ( 00%), 0.%( %) 0.0% per C from C 0% 0.% per ANSI C.0 and IEC 0- Class 0.S.0% per IEC 0- Class Calculated: vector sum of watts and VARs Calculated: watts/vas ±0.0 Hz 0.% per ANSI C.0 and IEC 0- Class 0.S ±.0% per IEC 0- Class 0.% per ANSI C.0 and IEC 0- Class 0.S.0% per IEC 0- Class Calculated: vector sum of watts and VARs 0.% per ANSI C.0 and IEC 0- Class 0.S Interharmoncs Mnmum and/or Maxmum Values Volts Current Power Power factor Frequency THD Demand values Trend analyss Event loggng Dsturbance recordng Other Features L-L, L-N A, B, C Watt, VAR, VA Apparent Hertz kw, kvar, kva, amperes Apparent (low alert) Hertz (out of range alert) kw, kvar, kva; maxmum kw, kvar, kva Loggng on demand nterval or Modbus command 0.% of RV 0.% of RV 0. 00% 0.% of RV 0.% of RV 0.% of RV 0.% of RV ±0.0 Hz Storage 0 regsters ( bt) by 0 entres each ( KB) MB PG output relays PG analog outputs Dscrete contact nputs Analog nputs -pulse nputs wth BACnet TD000E Legend: PG = Programmable FS = Full scale RV = Read value Auxlary Voltage (Optonal) = Provdes three addtonal voltage nputs to the meter: Va, Vb, Vc. Interharmoncs ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ±0.% per ANSI C.0 0. Class ANSI C.0 (0.%) L-L, L-N A, B, C, Watt, VAR, VA Apparent Hertz kw, kvar, kva, amperes MB MB Synch-nput kw utlty Optonal demand synchronzaton va Modbus Auxlary voltage kwh pulse ntator Waveform dsplay Waveform capture Frequency dstrbuton dsplay Yes Yes Dsplay type Dsplay lnes/character Dsplay character heght Red LED lnes, characters 0. (.) H Backlt LCD lnes by characters each (full alphanumerc top row). mm Red LED lnes, characters 0. (.) H Communcatons Seral: Modbus RTU, Modbus ASCII Network: Modbus TCP Seral: Modbus RTU, BACnet MS/TP Network: Modbus TCP va Power Xpert Gateway Seral: Modbus RTU, Modbus ASCII, DNP.0 Network: Modbus TCP, wred or wreless Setup confguraton Va confguraton software/dsplay Va dsplay/confguraton software Va confguraton software/dsplay.0 (.) H x.0 (0.) W x.0 (.) D.0 (00.) H x.0 (0.) W x.0 (.) D (see Page.-) Meter: 0 to 0 C 0 to 0 C Dsplay: 0 to 0 C TD000E = Power Xpert Meter 000/000 supported. 0 0 CA0000E For more nformaton, vst:

6 .0- Overvew Selecton Chart November 0 Sheet 000 Table.0-. Meterng Selecton ChartDmensons n Inches (mm) (Contnued) Devce Name Accessores See Page.- Power Xpert Mult-Pont Meter Power Montorng/ Meterng Module (PM) IQ Energy Sentnel 0 0 Secton Page Number Electrcal Parameters Volts Amperes Current range (% of nomnal) Watts VARs VA PF-apparent PF-dsplacement Frequency THD-voltage THD-current Watthours VAR-hours VA-hours Ampere-demand Watt-demand VAR-demand VA-demand Revenue accuracy Indvdual ampere harmoncs Indvdual voltage harmoncs ±0.% RV ±0.% RV ±0.% RV ±0.% RV ±0.% RV ±0.% RV ±0. Hz At computer only. The auxlary voltage opton adds three addtonal voltage nput channels to Power Xpert Meters. Optonal. ±0.% per ANSI C.0 0. class ±0.% per ANSI C.0 0. class ±0.% per ANSI C.0 0. class ±0.% per ANSI C.0 0. class ±0.% per ANSI C.0 0. class ±0.% per ANSI C.0 0. class ANSI C.0 (0.%) ±0.% of RV ±0.% of RV ±.0% of RV ±.0% of RV ±.0% of RV ±.0% of RV ±0. Hz ±.0% per ANSI C. ±.0% of RV ±.0% of RV ±.0% per ANSI C. Interharmoncs Mnmum and/or Maxmum Values Volts Current Power Power factor Frequency THD Demand values Trend analyss Event loggng Dsturbance recordng Other Features L-L, L-N A, B, C Watts, VAR, VA Apparent Hertz Watts (Delvered & Receved), Watts (Q Q), VA (Q, Q), VA (Q, Q) Interval data 0 latest events and hstorcal Storage MB standard, GB optonal PG output relays PG analog outputs Dscrete contact nputs Analog nputs Waveform dsplay Waveform capture Frequency dstrbuton dsplay Dsplay type Dsplay lnes/character Dsplay character heght Communcatons standard, each module standard, each module Crcut breaker status ±.0% FS ±.0% FS ±.0% FS Synch-nput kw utlty Va communcatons and dgtal nput Va communcatons only Auxlary voltage kwh pulse ntator Aggregate or man-dgtal output, LED output on meter modules (accuracy check) LCD color touchscreen -nch dagonal Graphcs Seral: Modbus RTU Network: Modbus TCP, BACnet/IP, Ethernet TCP/IP, HTTP, HTTPS, SNMP, SMTP, SFTP Seral: INCOM, Modbus RTU Network: va Power Xpert Gateway Seral: INCOM Network: va Power Xpert Gateway Setup confguraton Va PXMP confguraton software Va confguraton software Dmensons nches (mm) Operatng temperature range Reference lterature Refer to TD000EN (see Page.-) 0 to 0 C TD000EN Refer to IL00E to 0 C IL00E Refer to TD..0.T.E. (see Page.-) to 0 C TD0TE Legend: PG = Programmable FS = Full scale RV = Read value Auxlary Voltage (Optonal) = Provdes three addtonal voltage nputs to the meter: Va, Vb, Vc. Interharmoncs = Power Xpert Meter 000/000 supported. For more nformaton, vst: CA0000E

7 November 0 Sheet 000 Eaton Advanced Meters Power Xpert Meter 000/000/000 Seres.- Power Xpert Meter 000/000/000 Seres Power Xpert Meter 000/000/000 Seres Dsplay and Meter Base General Descrpton The Power Xpert Meter 000/000/ 000 Seres montors the crtcal aspects of an electrcal dstrbuton system. Ths premer power qualty meterng nstrument s smple to use, powerful, scalable and hghly flexble. The Power Xpert Meter 000/000/ 000 offers a new level of ntutve user nterface desgn, presentng crtcal electrcal dstrbuton system nformaton n smple-to-navgate and easy-to-understand nformaton archtecture. The Power Xpert Meter 000/000/000 Graphc Dsplay vsualzes the nformaton from up to meter modules. The embedded Web server dsplays complex power qualty data usng standard Internet browsers and allows for devce confguraton from the browser. Both the local graphc dsplay and the embedded Web server present real tme, hstorcal and event nformaton n a browser-style graphcal format to help the user nterpret key crcut nformaton, such as: Current loadng Voltage and power levels Power factor energy usage I/O status Power qualty measurements Harmonc plots Dsturbance and transent waveforms ITIC dsturbance summary screen The Power Xpert Meter 000/000/ 000 Seres Graphc Dsplay uses a smple twst and clck navgaton control dal to easly navgate the menus and drll down nto ncreasng levels of mportant detal. A back key enhances the browser-lke navgaton of the graphc dsplay. The Web server provdes the energy and demand readngs requred to help manage the cost of energy. It also provdes crtcal nformaton regardng power qualty, such as harmonc dstorton, flcker, crest factor, K-Factor and more. Note: Features and functonalty may vary dependng on the meter model and optons beng used. Revew the Features and Benefts chart n Table.- for detals. Applcaton Descrpton Identfy Power Qualty Problems to Help: Identfy harmoncs, sags, swells and transents damagng or dsruptng senstve, mssoncrtcal IT equpment Boost IT equpment s servce lfe to the maxmum Analyze sequence of events up to mllsecond tme resoluton Protect motors from damage Preserve the ntegrty of processes and batches Prevent blown capactor bank fuses Protect transformers and conductors from overheatng Detect and Record Hgh-Speed Transents to Help: Avod equpment damage and dsrupton Identfy equpment malfuncton Montor Crcut Loadng to Help: Avod overloads and nusance overload trps Maxmze equpment utlzaton Manage emergency overloads Manage Energy Utlzaton to Help: Reduce peak demand charges and power factor penaltes Identfy excessve energy consumpton Metered/Montored Parameters Note: See Table.-. Volts: L-L, L-N, Avg. L-L, Avg. L-N, N-G Phase neutral and ground currents Power: real, reactve and apparent Frequency Power factor: apparent and dsplacement Energy Demand % THD Mnmum and maxmum values Harmoncs Flcker Indvdual harmoncs Interharmoncs % TDD ITIC events plot, duraton, magntude Energy comparsons Demand comparsons Event calendar Event tmelne and sequence Number of s of avalablty Phasors Sequence components Crest factor K-Factor PQ ndex Accuracy Currents: 0.0% RV 0.0%FS Voltage: 0.% RV 0.0% FS Energy, and demand power: 0.% n accordance wth ANSI C.0 Frequency: ±0.0 Hz Power factor: 0.0% at Unty PF 0.0% at 0. PF 0 0 CA0000E For more nformaton, vst:

8 .- Eaton Advanced Meters Power Xpert Meter 000/000/000 Seres November 0 Sheet Communcatons Multple communcatons ports ncludng: Standard RS- remote dsplay port RS- Modbus RTU Slave port RJ- 0/00Base-T Local Confguraton Port (local Web server connecton) HTTP (local), FTP, COMTRADE Optonal Communcatons Expanson Card (CEC) Selectable 00FX or 0/00Base-T Ethernet network port RS- Modbus RTU Selectable Master/Slave port RS- Modbus RTU Slave port HTTP (remote), Modbus TCP, SNMP, SMTP, NTP, DNP.0 Power Xpert Meter n Modbus RTU Slave Mode eolr Fgure.-. RS- Network. When usng Modbus RTU over an RS- communcatons network, the data rate, data protocol (data bt, stop bt and party) and wrng topology (two-wre or four-wre) must be the same for each of the devces. PLC Power Xpert Ethernet Swtch For Optonal Graphc Dsplay Note: Dsplay ports restrct access to up to Power Xpert Meter 000/000/000 meter modules located on the dsplay RS- network. RS- meter dsplay network port RJ- 0/00Base-T for access to Local Dsplay Power Xpert network Communcaton Protocols Supported Modbus RTU Modbus TCP Ethernet TCP/IP HTML NTP (Network Tme Protocol) FTP (Fle Transfer Protocol) SMTP (Smple Mal Transfer Protocol) SNMP (Smple Network Management Protocol) COMTRADE (IEEE C.-) DNP.0 over Ethernet (Dstrbuted Network Protocol) Modbus Master. Connectons should be made usng communcaton/control shelded cable equvalent to Belden cable p/n. Physcal Characterstcs Two-Pece Desgn Power Xpert Meter 000/000/000 meter module Power Xpert Meter 000/000/000 Graphc Dsplay 0 x 0 pxel backlght LCD remote graphcs dsplay (supports up to Power Xpert Meter 000/000/000 meter modules) Dsplay/Meter Mountng Optons Remotely mount the dsplay up to 000 ft (0m) away from to Power Xpert Meter modules Mount the dsplay and Power Xpert Meter module on opposte sdes of a panel. addtonal meter bases can be remotely mounted Meter Base Unt Characterstcs Heght:. nches (. mm) Wdth:. nches (. mm) Depth:. nches (0. mm) ncludng optonal wall mountng brackets NEMA ratng: NEMA, IPØ Dsplay Unt Characterstcs Heght:.0 nches (.0 mm) Wdth:.0 nches (. mm) Depth:. nches (. mm) behnd panel surface.0 (. mm) projecton n front of panel surface NEMA ratng: NEMA, IP front of panel ratng Standards and Certfcatons Safety: EN00-, UL/cUL 00- Accuracy: IEC/EN0 0. class, ANSI C.0 0. Class EMC: FCC Part Subpart B Class A EN0 Class A Measurement Canada approval AE- (000/000 meters) Immunty IEC CE Mark 0 Power Xpert Meter Fgure.-. Ethernet Network. Optonal Ethernet Communcatons Card must be ordered wth the meter. Standard Web Browser. Avalable Ethernet connectons are: 0Base-T and ST fber. For more nformaton, vst: CA0000E

9 November 0 Sheet 000 Eaton Advanced Meters Power Xpert Meter 000/000/000 Seres.- Ease-of-UsePower Xpert Meter 000/000/000 Graphc Dsplay (Opton) The Power Xpert Meter 000/000/ 000 dsplay features a large easy-toread whte backlt graphc LCD. The nformaton presented by the dsplay s organzed nto an nformaton archtecture that s easy-to-navgate and organzed for smplcty. Screen navgaton s accomplshed usng a navgaton control dal and a back button. The user smply twsts the knob on the navgaton control dal to move between menu selectons and drll down lnks on the screen. When the selecton s hghlghted, pressng the dal makes the selecton. Informaton s dsplayed from a sngle meter or an RS- dasychan of up to meters. The dsplay features a rch set of screens ncludng real-tme data, trend plots, waveform vews and an ITIC Plot. The graphc dsplay allows basc devce setup and password protected resets. An audble alarm s avalable to annuncate alarm condtons. Power Xpert Meter 000/000/000 Embedded Web Server The Power Xpert Meter 000/000/000 embedded Web server offers Eaton customers a new level of accessblty to the crtcal nformaton requred to manage ther electrcal dstrbuton system. The Web server ncludes real-tme crcut nformaton n both numerc and graphcal vsual formats to help montor crcut parameters such as current loadng, voltage and power levels, power factor, THD, Flcker and more. The Web server also provdes energy and demand readngs wth graphc usage plots to help analyze energy usage patterns. Energy readngs nclude kwh, kvarh, delvered and receved and kvah wth tme of use and RTP dsplays. The nterval energy usage plot ncludes the ablty to do week-to-week and month-to-month energy consumpton graphcal comparsons for benchmarkng purposes. The embedded Web server wll also dsplay n smplfed Chnese f connected to a computer confgured for Chnese language. Both the Power Xpert Meter 000/ 000/000 embedded Web server and the local graphc dsplay support graphcal trend charts of key crcut measurements such as current, voltage, power and energy. The trend chart supports a zoom feature that allows the user to vew data over a short perod of hours up to years. The trend chart ncludes zoom n/out buttons and a horzontal slder bar control to manage scrollng forward and backward through the data. Trend charts of basc readngs nclude mnmum, maxmum and average readngs. Trend charts of nterval by nterval energy data also dsplay peak demand. Note: For remote access and networkng capabltes such as connectng to a LAN/ WAN, use the optonal Communcatons Expanson Card (CEC). Sag/Swell/Transent Capture and Recordng 0 cycles of waveform are oversampled at 0 samples per cycle (Power Xpert Meter 000/000), fltered through antalasng and recorded at samples per cycle and post event data. The Power Xpert Meter 000 samples at a rate of 00,000 samples per cycle. Embedded Web server supports vewng of trggered waveforms one channel at a tme and ncludes the ablty to zoom and to scroll horzontally usng a slder bar. The Power Xpert Meter 000/000 Seres have preconfgured (00V and below) trgger settngs for sags, swells and transents, and do not requre addtonal setup by the user. Waveforms are stored n non-volatle flash memory usng an ndustry standard COMTRADE format. Waveforms can be automatcally sent out as COMTRADE attachments to an e-mal followng an event, or can be retreved from an FTP (Fle Transfer Protocol) drectory structure n the Power Xpert meter module s memory. Hstorcal Trend Loggng The Power Xpert Meter 000/000/000 records hstorcal data for graphcal vewng from the Local dsplay or the embedded Web server. Graphcal vews of hstorcal data support pan and zoom. standard meterng parameters are logged as part of the standard meter functonalty ncludng mn./max. and average for each parameter. The averages are calculated over the nterval perod. The mnmum and maxmum readngs are based on 00 ms calculatons. Storage capacty for standard trend plots ncludes all of the followng ntervals: Every mnutes for hours ( days) Every mnutes for hours ( days) Every hour for days ( weeks) Every hours for weeks Every week for months Note: Trend plot data can be easly exported to thrd-party applcatons, such as Mcrosoft Excel n csv-fle format. In addton, metered parameters are automatcally stored on the bult-n FTP Servers, where they can be easly coped and mported nto thrd-party applcatons for benchmarkng and analyss. Logs on the FTP Server nclude the mn./max. and average for standard meterng parameters at -mnute ntervals. Storage capacty for trend data: days of -mnute nterval trend data. Capacty=, ntervals. 0 0 CA0000E For more nformaton, vst:

10 .- Eaton Advanced Meters Power Xpert Meter 000/000/000 Seres November 0 Sheet Energy Profle Data The Power Xpert Meter 000/000/ 000 records Real and Reactve energy forward, reverse, net and absolute sum, as well as Apparent energy (kvah). Up to eght status nputs can be confgured as energy accumulators for countng KYZ pulse nputs (opton). These readngs are stored over a confgurable nterval from to 0 mnutes, as well as n daly and weekly totals. Wth the optonal LAN/WAN Ethernet Communcaton Expanson Card, users can easly confgure the meters to send perodc e-mals at user-defned ntervals of energy consumpton and power demand. E-mals contan a summary of readngs per rate structures and also have the actual measurements attached to the e-mal s body as a CSV fle n a ZIP contaner. In addton, metered parameters are automatcally stored on the bult-n FTP Server, where they can be easly coped and mported nto thrd-party applcatons for benchmarkng and analyss. Logs on the FTP Server nclude energy consumpton logs, one for every month n CSV fle format, trended measurement logs also n CSV fle format and waveform captures n COMTRADE fle format. Storage capacty for energy profle data: days of mnute nterval energy and pulse nterval data (Fxed nterval capacty = ntervals. Confgurable ntervals from to 0 mn) days of day accumulated energy and pulse nterval data 0 weeks of week accumulated energy and pulse nterval data Energy and Demand Comparsons Energy and demand usage patterns can be analyzed wth the month-to-month, week-to-week comparson chart bult nto the meter. Raw data can be exported wth the Save Table opton to other applcatons, such as Excel, for further analyss and graphng. Power Xpert Meter Profler Free Download The Power Xpert Meter Profler s a free energy-management software download, compatble wth the Power Xpert Meter 000/000/000, allowng a comparson of expected or baselne energy consumpton patterns to actual usage, and flaggng areas of concern usng devatons from modeled energy patterns. These devatons pont to targets as they hunt for energy consumpton offenders n ther faclty. By applyng pattern analyss technques and ntellgently usng color and shape to convey the results, the Power Xpert Meter Profler provdes the user an easy-tounderstand vsualzaton of energy usage, thus offerng nformaton for proactve energy management. Calendar Usage Vew Features and Benefts Develops a baselne of energy demand for management analyss Easly dentfes perods of hgh energy demand at-a-glance by day, week and month Allows for a daly, weekly, monthly comparson of energy usage compared to baselne Allows for detaled comparson of mult days energy usage Offers mult vews of energy usage and baselne comparsons to quckly dentfy anomales Mult-Day Detal Comparson Vew The Profler uses the prevous weeks of data for the energy use baselne, but you can manually add more values to the baselne. The Power Xpert Meter Profler s also a predctor: It can predct what energy consumpton would be expected later n a day. The Real-Tme vew generates a baselne from the last two months and makes a predcton of the future load. The vew represents the current day (today), and shows three graphs: the baselne for the day, the hstorcal data (up to present) and the predcted future data. Instantaneous data s retreved and averaged to keep the graphs up-to-date. The averaged values are shown as shapes at the current tme: Instantaneous, -mnute average and -mnute average. In addton, users can add the data from two dfferent Power Xpert Meter 000/000/000s nto one calendar vew. The profler wll mathematcally combne the two loads nto a totalzed vew. It s also possble to change the percentage contrbuton of each meter, as well as subtract a porton of one meter from another. To download the tool, go to and clck on the lnk for the Power Xpert Meter Profler. Regstraton wll be requred to download. 0 Daly Detaled Energy Usage Vew For more nformaton, vst: CA0000E

11 November 0 Sheet 00 Eaton Advanced Meters Power Xpert Meter 000/000/000 Seres.- Eaton Power Xpert Energy VewerFree Download The Power Xpert Energy Vewer (PXEV) provdes the means to develop an energy usage baselne for energy management programs, comparng nterval logged data ponts. It s a free Web download for compatble Eaton product home pages. Ths tool allows easy nterpretaton of the data collected by compatble devces va graphcal charts, graphs and reports wthout havng to export the avalable.csv fle nto Mcrosoft Excel or another tool. See Page.- for more nformaton. Event Trggers Comparson Summary The Power Xpert Meter 000/000/ 000 supports fve types of confgurable event trggers: Out of lmts (000/000/000) Demand overload (000/000/000) Sub-cycle dsturbance (000/000/000) ITIC (000/000) Fast transent (000) These trggers permt pckup, reset and pckup delay to be confgured by the user. When a trgger occurs, actons nclude Performance Montorng (# s analyss), Capturng Waveform, Capture Parameters, Send E-mal and Operate a Relay Output. The Graphc Dsplay flashes an LED to annuncate the alarm condton. An audble alarm s also avalable. Trgger optons nclude: Out of lmts: over 00 trggers Demand overload: 0 trggers ITIC: eght trggers Fast transent: dv/dt and absolute per phase Sub-cycle dsturbancedv/dt and absolute Event Loggng The Power Xpert Meter 000/000/ 000 local graphc dsplay or the embedded Web server both allow the user to vew a lst of trggered events along wth any captured parameters, event detals, and trggered waveforms. In addton, a separate event log ncludes a varety of actvtes ncludng acknowledged trggers, new mn. and max. events, and system operatons such as resets. The sze of the event log s vrtually unlmted based only on the memory opton selected. E-mal Notfcaton Wth the optonal LAN/WAN Ethernet Communcaton Expanson Card attached to the Power Xpert Meter 000/000/000, the users can easly confgure the meters to send perodc e-mals at user-defned ntervals for energy consumpton and power demand. E-mals contan a summary of readngs per rate structures and also have the actual measurements attached to the e-mal s body as a CSV fle n a ZIP contaner. Prompt alarm e-mals can also be sent for any event condton ether standard n the meter or ones set up by the user based on thresholds, dv/dt trggers or IO status changes wth the optonal IO Card. Alarm e-mals can be confgured to have the COMTRADE waveform capture attached to the e-mal s body. Perodc E-mal Message ITIC Analyss Plot The Power Xpert Meter graphc dsplay (opton) and Web server (opton) nclude a graphc representaton of the ITIC plot (Power Xpert Meter 000/000) wth counts of dsturbances and transents that have occurred. The ITIC plot organzes events nto eght dstnct dsturbance zones correspondng to severty and a th zone for transents. A pass/fal count s dsplayed to ndcate how many events are outsde the ITIC lmts. Clckng on any counter n the ITIC Web page wll lnk the user to the event vew and dsplay all trggered events n the selected zone. Ths makes t smple to vew dsturbance waveforms assocated wth the ITIC plot. A separate ITIC graph s avalable to revew ndvdual ITIC events. Ths graph wll show the user the event ht poston on the graph and the event duraton and magntude. Inputs and Outputs Power Xpert Meter 000/000/000 s avalable wth an optonal dgtal I/O card that ncludes: Eght dgtal nputsself sourced Vdc Three relay outputsa max. contnuous, 0 Vac max., 0 Vdc max. Two sold-state outputs0 ma max. contnuous, 0 Vdc max. Each of the eght nputs are nterrupt drven, allowng for ms accuracy of dgtal events tme stamps ( ms accuracy requres local NTP TmeServer). Inputs can also be confgured for demand synch, and pulse countng. Inputs selected for pulse countng can be scaled. Interval by nterval pulse recordngs are mantaned n profle memory and can be dsplayed graphcally. Outputs can be used for KYZ, or alarm annuncaton. 0 0 CA0000E For more nformaton, vst:

12 .- Eaton Advanced Meters Power Xpert Meter 000/000/000 Seres November 0 Sheet 00 Ratngs Applcaton to 00 kv, no PTs to 00V CT ratos selectable from standard 0/00 Vac lne CT nputs accept A secondary Power supply: standard 0/0 Vac or 0/0 Vdc Storage Capacty Table.-. Power Xpert Meter 000/000/000 Estmated Memory and Storage Capacty wth // GB Memory Capacty Model Memory Event Fle Sze (KB) Occurrence Per Month Memory Usage (MB) Months of Capacty wth GB Memory Typcal Severe Typcal Severe Typcal Severe PXM 000 GB Subcycle dsturbance PXM 000 GB ITIC event Subcycle dsturbance ITIC subcycle dsturbance Total---> 0.. PXM 000 GB ITIC event Subcycle dsturbance Transents ITIC subcycle dsturbance transents Total---> 0.. The typcal and severe power qualty event occurrences are estmates and may vary dependng on the electrcal envronment. Memory s not allocated by event category; memory s used frst come, frst served. 0 0 For more nformaton, vst: CA0000E

13 November 0 Sheet 00 Eaton Advanced Meters Power Xpert Meter 000/000/000 Seres.- Power Xpert Meter 000 Harmoncs Dsturbance capture Low frequency transent detecton and capture Standard power qualty ndex GB data loggng Power Xpert Meter 000 Harmoncs, ncludng ndvdual harmoncs Flcker calculatons ITIC performance curve Event calendar vew Events tmelne vew Sequence of events waveform plot Enhanced power qualty ndex GB data loggng Power Xpert Meter 000 Impulsve transent capture at MHz 00,000 samples per cycle Premum power qualty ndex GB data loggng Table.-. Power Xpert Meter 000/000/000Features and Benefts Feature Power Xpert Meter Beneft General Embedded Web server Use a standard Web browser to montor and manage the meter over the network, Internet. TOU meterng support Tme of usage can be set up to support four dfferent schedules. Frmware flash update support Enables you to flash the meter wth the latest frmware updates. Self-learnng capablty (characterzes normal per crcut) Power, Energy and Demand Voltage, current: per phase mnmum, maxmum, average, trend graph analyss, export, prnt Energy and demand plot comparsons month-to-month, week-to-week The meter can automatcally adjust to the envronment and alarm only when real events occur. Revew voltage and current trends, export, prnt and analyze parameters rght on the meter or external software. Plot two months or two weeks for vvd energy or demand comparson. Power: power factor, apparent, real, reactve, frequency Revew power usage and power factor and avod potental PF penaltes. Energy, demand: forward, reverse, net, sum, TOU, profle, prevous month comparson, graph analyss, export, prnt Keep track of your energy usage, compare tme of usage and usage aganst prevous month, dentfy peaks to conserve energy usage. Power Qualty Analyss Statstcal analyss (mnmum, maxmum, average) Revew statstcal trends, dentfy past and future problem areas. Sag and swell montorng, management and recordng Capture electrcal sags and swells and analyze the waveforms. Symmetrcal components: zero, negatve, postve Analyze possbly unbalanced three-phase power systems. Low frequency transent detecton and capture Capture lower frequency transent waveforms for retrospectve analyss or e-malng. Samplng rate, maxmum samples/cycle ,000 Extremely hgh samplng rate wll effectvely capture mpulsve transents. Number of Nnes uptme data (e.g., nnes=.%) Revew uptme avalablty per cent. K-factor Revew the rato of eddy current losses, e.g., when drvng non-lnear and lnear loads. Crest factor Revew the peak-to-average rato of the waveform. Securty Secure level user access prvleges Defne approprate securty access level per user. Delta-Sgma A/D oversamplng rate. Note: These specfcatons are subject to change wthout notce and represent the maxmum capabltes of the product wth all optons nstalled. Ths s not a complete feature lst. Features and functonalty may vary dependng on selected optons, frmware verson and product model. Please refer to the techncal data sheet and user manual for detaled specfcatons. 0 0 CA0000E For more nformaton, vst:

14 .- Eaton Advanced Meters Power Xpert Meter 000/000/000 Seres November 0 Sheet Table.-. Power Xpert Meter 000/000/000Features and Benefts (Contnued) Feature Power Xpert Meter Beneft Communcatons and I/O Modbus TCP Easy ntegraton wth standard protocol to power management and other software. Modbus RTU Integrate meters to exstng Modbus networks, dasy chan several ( ) meters together. HTML Communcate to the meter over the Internet va standard Web browser. SNMP (Smple Network Management Protocol) Communcate wth the meter va Smple Network Protocol; hook to exstng NMS system. SMTP (Smple Mal Transfer Protocol) Send e-mal messages va standard Smple Mal Transfer Protocol. FTP (Fle Transfer Protocol) Access, copy, paste, cut waveform capture fles on the meter wth an FTP Clent. NTP (Network Tme Protocol) Network Tme Protocol support enables the meter to synchronze tme over the network up to the mllsecond resoluton. COMTRADE, open IEEE standard fle format for waveform capture export Import waveform captures n standard IEEE (C.-) COMTRADE fle format to thrd-party software. DNP.0 over Ethernet (Dstrbuted Network Protocol) Communcate wth the meter va DNP.0 over Ethernet, hook to exstng utlty systems. Trend measurements CSV fle export Easly export trend measurements to thrd-party applcatons, e.g., Mcrosoft Excel n standard CSV fle format. I/O (eght dgtal nputs, three relay outputs, two sold-state KYZ outputs) The Power Xpert Meter I/O Card s extremely flexble and can be used n a large varety of dfferent applcatons. Dgtal nputs and relay outputs can be programmed to nteract durng varous condtons defned by the user. Varous thrd-party devces, such as alarm, pulse meters, trp unts, sensors can be easly ntegrated to the Power Xpert Meter. Trggers and events can be ted to the meters standard functons such as, e.g., e-mal, logs and trends. Tme Synchronzaton NTP tme synchronzaton up to mllsecond accuracy Network Tme Protocol support enables the meter to synchronze tme over the network up to the mllsecond resoluton GPS tme synchronzaton up to mllsecond accuracy The GPS opton allows the meter to synchronze tme over the GPS satellte postonng system up to the mllsecond resoluton Logs Trend loggng Log trend nformaton for easy statstcal analyss. Load profle Revew the load profle graph to get a better understandng of your electrcal load versus tme. Event loggng Log events for retrospectve event analyss. Memory and Storage Standard memory, GB Store large amounts of waveform captures and events for hstorcal analyss. Harmoncs Harmonc levels Provdes extremely fast, hgh resoluton D/A converson. Total Harmonc Dstorton (THD) Revew the total harmonc dstorton level drectly on the meter. Delta-Sgma D/A converson technology Provdes extremely fast, hgh resoluton D/A converson. Harmoncs over-samplng (0 samples per cycle) Over-samplng enables the usage of Ant-Alasng technology, ncreasng accuracy. Ant-alas flterng Technology to remove out-of-band sgnal components resultng n more accurate data. Indvdual harmoncs Revew ndvdual harmonc levels drectly on the meter. Total Demand Dstorton (TDD) Identfy harmful harmoncs n, e.g., lghtly loaded varable-speed drve envronments where THD may be hgh but not relatve. Interharmoncs Interharmoncs allow you to see what s gong on between the nteger multples of the fundamental. Zoom n on the harmoncs trend graph and revew frequency content every Hz nstead of every 0 Hz. When used wth thrd-party devce and I/O opton. Note: These specfcatons are subject to change wthout notce and represent the maxmum capabltes of the product wth all optons nstalled. Ths s not a complete feature lst. Features and functonalty may vary dependng on selected optons, frmware verson and product model. Please refer to the techncal data sheet and user manual for detaled specfcatons. For more nformaton, vst: CA0000E

15 November 0 Sheet 00 Eaton Advanced Meters Power Xpert Meter 000/000/000 Seres.- Table.-. Power Xpert Meter 000/000/000Features and Benefts (Contnued) Feature Power Xpert Meter Beneft Hghlghts Subcycle dsturbance capturng Capture fast voltage changes/low frequency transent (e.g., capactor swtchng transent). dv/dt trggers for subcycle oscllatory transents Detect and record a large magntude oscllaton transent resultng n equpment damage. Absolute threshold and dv/dt trggerng Detect and record f a surge suppressor s necessary. Power qualty ndexstandard Complex power qualty data put nto smple graphc format. (ncludes dv/dt count, %TDD and %THDv) Power qualty ndexenhanced (ncludes standard ndex plus Sag level, swell level and flcker) Complex power qualty data put nto smple graphc format (ncludes ITIC events and flcker calculatons). Flcker calculatons Detect and quantfy low frequency rms voltage varatons causng ncandescent lghtng flcker. Automatc trgger settng Trgger thresholds are automatcally set accordng to ITIC (CBEMA) standard, no need to fgure ths out by yourself. Automatc event severty analyss Automatcally analyze the severty of the event wth the ITIC (CBEMA) performance curve plot, see where the event actually ht. Event severty counters An ITIC (CBEMA) event counter keeps track of the number of all sags, swells and transents. ITIC (Informaton Technology Industry Councl), prevously CBEMA performance curve Custom ITIC (CBEMA) plot wth ndvdual event magntude and duraton ITIC (Informaton Technology Industry Councl), prevously CBEMA performance curve for easy power problem evaluaton. Revew custom ITIC (CBEMA) plots of ndvdual events showng you the actual magntude, duraton and ht are n a smple graphcal representaton. Event calendar vew The Events Tmelne calendar vew provdes nstant nsght to the frequency of power events and helps detect reoccurrng problems. Events tmelne vew Vew and understand the sequence of events that have occurred durng a perod of tme. Sequence of events and events plot on waveform Plot color-coded events on a captured waveform to gan nsght nto the sequence of events cycle per cycle. Power qualty ndexpremum (ncludes enhanced ndex plus counts of mpulsve transents) Hgh-Speed Transent Capture and Detecton Complex power qualty data put nto smple graphc format (ncludes ITIC events and flcker calculatons). MHz capture of mpulsve transents Capture mpulsve transents by takng sx samples every mllonth of a second. Transent capture duraton: ~0 ms/m Hz ~0 ms/ MHz Record and analyze transents durng a longer tmeframe. Waveform recorded at 00,000 samples per cycle Hgh-speed ensures mpulsve transents are correctly captured (fast rse tme). Three-phase voltage and neutral-to-ground fast Capture mpulsve transents on all four channels. transent capture Note: These specfcatons are subject to change wthout notce and represent the maxmum capabltes of the product wth all optons nstalled. Ths s not a complete feature lst. Features and functonalty may vary dependng on selected optons, frmware verson and product model. Please refer to the techncal data sheet and user manual for detaled specfcatons. 0 0 CA0000E For more nformaton, vst:

16 .-0 Eaton Advanced Meters Power Xpert Meter 000/000/000 Seres November 0 Sheet 00 Power Xpert Meter 000/000/000 Graphc Dsplay (Opton) Features A menu-drven graphcal dsplay wth nformaton organzed nto a user-frendly nformaton archtecture. The Homepage (see below) offers: Graphcal level ndcator based on a statstcal analyss for three-phase lne-to-lne and lne-to-neutral voltage and per phase currents to quckly ndcate out of normal readngs Large easy-to-read average L-L voltage average phase currents and system frequency can be hghlghted and selected usng the navgaton control dal to drll down for addtonal detal Menu selectons for meter, power, qualty, events and setup are shown for ease of navgaton nto dsplay for more detal, or basc devce setup Selectng the trend plot for a gven parameter dsplays a hstorcal graph of the selected parameter over the last hours. The zoom buttons change the tme scale to one of several data vews based on hstorcal averages wth mn./max. The Pan button allows scrollng wthn the selected vew. Trend Plot Waveforms can be dsplayed for currents and voltages. The waveforms can be vewed on demand for steadystate condtons. Trggered waveforms can also be dsplayed to vew sag/ swell or transent data. Ethernet Settngs Ethernet and other settngs can be nput or verfed va the Power Xpert LCD Dsplay. Note: Some of the other settngs are specfc only to the Web Browser GUI. 0 ITIC Plot (Power Xpert Meter 000/000) Homepage Hghlghtng a feld such as the avg. current value and pressng the navgaton control dal brngs up a detal screen lke the one below. Waveform Vewer The Power Xpert Meter classfes dsturbances and summarzes the results graphcally usng the ITIC plot. The number of ITIC sags and swells are ndcated for each of nne severty levels. A pass/fal summary s shown to ndcate how many events are outsde the ITIC pass zone. Current Summary Harmonc Spectrum 0 Hghlghtng an ndvdual readng on the detal summary level screen and selectng t drlls down to a level ncludng lnks to mn./max., hstorcal trend plots, trggers, harmonc spectral data, and waveform vewng. The harmonc spectral plot dsplays both harmoncs and nterharmoncs up to the th order. A detaled table also ncludes ndvdual magntudes and angles of current and voltage harmoncs, as well as a harmonc power calculaton at each frequency. For more nformaton, vst: CA0000E

17 November 0 Sheet 00 Eaton Advanced Meters Power Xpert Meter 000/000/000 Seres.- Power Xpert Meter Graphc Dsplay (Opton) Screens Meter Top Level Screen V-LL avg, V-LN avg, IA, IB, IC, Iavg, Freq. Power Xpert Meter 000/000/000 Web Browser Vews The Web server allows the user to vew waveforms of the voltage and current to spot power qualty problems such as notchng. Meter Detal Screens Per phase detal L-L, L-N, Symmetrcal Comp, Aux. Channels, Mn./Max. wth date/tme of occurrence, Trend Plots, Trggers, Phasors. Power Top Level Screen Three-Phase Power Factor, kwhr, kwd, Real-Tme kw, kvar, kva, Load Profle Lnk. Power Detal Screens Per phase detal, kva, kvar, kw, Mn./ Max. wth date/tme of occurrence, Trend Plots, Trggers. Qualty Top Level Screen 0 mn. and hr. PQIndex, THDI, THDV, K-Factor, Crest Factor, Flcker Pst, % s of Relablty. Qualty Detal Screens Per phase detal L-L, L-N,V aux, Odd, Even, Interharmoncs, Present, Mn/Max, Trend Plots, Harmonc spectrum plots, waveform plots. Events Top Level Screen Actve/Acknowledged Event lst, Trgger Lst, System Log, ITIC Curve Lnk. Event Detal Screens Event Lst, Condton, Acknowledge Button, Trgger Date/Tme, Trgger descrpton. Setup Top Level Screen Vew setup, Edt setup, Logn, Logout. Setup Detal Screens Quck Setup, Trgger setup, Detal settng. Power Xpert Meter 000/000/000 Web Browser Homepage (Note: 000 does not nclude flcker, ITIC) Power Xpert Meter 000/000/000 embedded Web server offers Eaton customers a new level of accessblty to the crtcal nformaton requred to manage the electrcal dstrbuton system. The embedded Web server ncludes real tme crcut nformaton n both numerc and graphcal formats to help montor crcut parameters such as current loadng, voltage and power levels, power factor. The Web server also provdes the energy and demand readngs requred to help manage the cost of energy. Readngs nclude kwh, kvarh, delvered and receved and kvah wth tme-of-use and separate status nput controlled energy accumulaton to account for energy durng specal tmes such as rate alert perods or stand-by generator tmes of operaton. The Web server also ncludes crtcal nformaton regardng Power Qualty such as harmonc dstorton, flcker (Power Xpert Meter 000/000), crest factor, K-Factor and more. Events Tmelne (Power Xpert Meter 000/000) Vew and understand the sequence of events that have occurred durng a perod of tme. Plot color-coded events on captured waveforms to gan nsght nto the sequence of events from one sngle cycle to the next one. Ths provdes the user an excellent vantage pont to revew and compare multple events at an unprecedented resoluton. Harmonc Spectral Plot The harmonc spectral plot dsplays both harmoncs and nterharmoncs up to the th order. A detaled table also ncludes ndvdual magntudes and angles of current and voltage harmoncs, as well as a harmonc power calculaton at each frequency. Even, odd and total THD are dsplayed for dagnostc purposes. In addton, the Power Xpert Meter 000/000 provdes nterharmoncs, whch allow users to see what s gong on between the nteger multples of the fundamental. 0 Steady-State Waveform 0 CA0000E For more nformaton, vst:

18 .- Eaton Advanced Meters Power Xpert Meter 000/000/000 Seres November 0 Sheet 00 Hstorcal Trend Plot Graphcal Trendng of Data The Power Xpert Meter 000/000/ 000 embedded Web server supports graphcal trend charts of key crcut measurements such as current, voltage, power and energy. The trend chart supports a zoom feature that allows the user to vew data over a short perod of hours or a longer perod of months. The trend chart has a horzontal slder bar control to manage scrollng forward and backward through the data. Trend charts of basc readngs nclude mnmum, maxmum and average readngs. Trend charts of energy data also dsplay demand values. Demand Comparson Demand comparson compares power consumpton day-to-day, month-tomonth or week-to-week. Power Xpert Meters can set to measure demand at to 0 mnute ntervals. Both sldng and fxed nterval wndows are supported for maxmum flexblty. ITIC Analyss Plot (Power Xpert 000/000) The ITIC Web page ncludes counters to track the occurrence of dsturbances and a pass/fal summary. In addton, selectng any dsturbance counter lnks to a detaled event vew of the dsturbances n that ITIC category. Dsturbance waveforms can be vewed from the browser. 0 Energy Comparson Energy usage patterns can be effortlessly analyzed wth the month-tomonth, week-to-week comparson chart. Raw data can be easly exported wth the Save Table opton to other applcatons such as Excel for further analyss or graphng (frmware verson.x.x and hgher only). Note: All data loggng for trend plottng s automatcally preconfgured n the Power Xpert Meter 000/000/000. In addton, the 000 and 000 Seres Meters have sag, swell and transent trggers bult-n accordng to the ITIC (CBEMA) standard. Dsturbance Recordng Sag/Swell Recordng 0 cycles of waveform are recorded at samples per cycle ncludng 0 cycles of pre and post trgger data. The Power Xpert Meter 000/000/ 000 embedded Web server supports vewng of trggered waveforms one channel at a tme ncludng the ablty to zoom and to scroll horzontally usng a slder bar. Waveforms are stored n Power Xpert Meter 000/ 000/000 non-volatle flash memory usng an ndustry standard Comtrade format. Waveforms can be automatcally sent out by e-mal followng an event, or can be retreved from an FTP drectory structure n the meter module s memory. Events Calendar (Power Xpert Meter 000/000) The Events Tmelne calendar vew provdes nstant nsght to the frequency of power events and helps detect reoccurrng problems. Color-coded events can be fltered to detect specfc ssues. Web Server Devce Confguraton Specal software s not requred to confgure a Power Xpert Meter 000/ 000/000. The embedded Web server ncludes comprehensve devce setup capablty. 0 For more nformaton, vst: CA0000E

19 November 0 Sheet 00 PQ Index Eaton Advanced Meters Power Xpert Meter 000/000/000 Seres Power at a Glance.- Fgure.-. PQ Index A statstcal analyss comparng the last 0 mnute and hour perods Power Qualty to the hstorcal norm for the crcut. The PQ Index score results n a Power Qualty ratng of Normal, Cauton and Alert for the perod. Flcker (EN000--; Power Xpert Meter 000/000) Fgure.-. Flcker Flcker values for Perceptblty, PST and PLT are calculated based on EN000-- gudelnes. Fgure.-. Power at a Glance Easly Upgrade Your Power Xpert Meter 000 to a 000 Eaton understands that our customers needs change over tme. That s why we ve developed meters that can grow wth you. Once a Power Xpert Meter 000 s purchased, you have the ablty to upgrade to a Power Xpert Meter 000, wth no nterventon from Eaton, when needed. All the features of the Power Xpert Meter 000 that you have been usng and depend on reman, however, once updated, all the addtonal features of the Power Xpert Meter 000 are avalable. The selfupgrade s avalable on Eaton s Web ste. You ll need a credt card, your Power Xpert Meter 000 seral number and date code (you wll be presented wth ths nformaton f you are usng the upgrade lnk drectly from your Power Xpert Meter) and your e-mal address. Once you have completed the purchase, we wll send you your new lcense key nformaton va e-mal that wll allow you to complete the upgrade. Hgh-speed trggerng of waveforms based on events such as breaker trps or statc transfers Demand nterval tmng taken from a master utlty meter end of nterval pulse Status nputs are self sourced provdng a nomnal Vdc (0 0 Vdc) across the crcut. Names can be confgured for each nput for ease of use. Relay Outputs The optonal PXIO-B card ncludes three A form C relay outputs rated for 0 Vac or 0 Vdc. These outputs can be used for applcatons such as: Alarm annuncaton KYZ pulse output Alarm outputs can be drven from trggers based on meterng values. Output modes nclude: Normalrelay energzed durng alarm condton Latchedrelay energzed by event trgger, de-energzed by acknowledgement Tmedrelay energzed by event trgger, mantaned for a programmed nterval Auxlary Voltage Opton The optonal auxlary voltage selecton allows for sensng of another nput voltage such as a transformer or UPS and secondary voltage from transformer or UPS output. Ths opton permts waveform or harmonc comparsons across these devces. Dscrete Contact Inputs The optonal PXIO-B expanson card offers eght dgtal nputs that are useful for a varety of applcatons such as: Status ndcaton wth tme stampng of transtons ( ms precson) Pulse Countng of KYZ or other utlty pulses such as ar, water or gas 0 0 CA0000E For more nformaton, vst:

20 .- Eaton Advanced Meters Power Xpert Meter 000/000/000 Seres November 0 Sheet 000 Communcatons Expanson Card (CEC) The optonal CEC Card offers two Ethernet connecton optons, 0/00Base-T and a fber-optc port that can be used for the followng applcatons: Montorng, managng and confgurng the meter remotely usng a standard Web Browser nterface lke Mcrosoft Internet Explorer Alarm notfcatons va e-mal, SMTP Enablng access to the meter s FTP server (energy, trend and waveform logs) Provdng Modbus TCP/IP or RTU communcatons to BMS systems Provdng DNP.0 over Ethernet to utlty systems Provdng SNMP communcatons to NMS systems Synchronzng wth an NTP server for ms tmestampng resoluton Asset management va SNMP to Network Management Systems Updatng frmware on the meter Fgure.-. Power Xpert Meter 000/000/000 Module Layout 0 I/O Card (opton) Dgtal nputs -. Sold-state outputs -. Relay outputs -. CT and Voltage Connectons CT nput connectons. Standard three-phase voltage phase nputs. Auxlary channel voltage nputs (opton). Communcaton Expanson Card (LAN/WAN Ethernet Networkng) (opton) 00FX ST-type Ethernet (mult-mode). 0/00Base-T Ethernet. RS- (two-wre w/sheld)v accessory power (Com ). RS- (Tx Rx) Modbus RTU (Com ). Standard Features Local RJ- confg. port (non-networkable Ethernet). RS- (two-wre w/sheld) Modbus RTU (Com ). Meter mountng brackets. Sealable mode swtch cover. Control power (00 0 Vac and 0 0 Vdc) (±0%). Dsplay RS- network port (up to meters)v accessory power (Com 0). Meter base address. Com reset button. 0 For more nformaton, vst: CA0000E

21 November 0 Sheet 00 Eaton Advanced Meters Power Xpert Meter 000/000/000 Seres.- Control Power 0/0 AC 0/0 DC ( ) N () L PSI- Dsconnect Swtch Breaker Dsconnect Swtch Voltage Inputs V V V V VR Protectve Earth / Chasss Ground Shortng Block Current Inputs L Load L L Fgure.-. Three-Phase Three-Wre Delta (Up to 00V) Note: Based upon the voltage ratng, you may need a control power transformer for the control power. Lne Control Power 0/0 AC 0/0 DC ( ) N () L PSI- Dsconnect Swtch Voltage Inputs V V V V VR Protectve Earth / Chasss Ground Current Inputs 0 Breaker Dsconnect Swtch Shortng Block L Load L L Fgure.-. Three-Phase Three-Wre Delta (Above 00V) Note: Based upon the voltage ratng, you may need a control power transformer for the control power. Lne 0 CA0000E For more nformaton, vst:

22 Model#: PX000 Catalog#: PX0ACB Style#: D0G00 Seral#: 0000 G.O.#: XXXXXXXXXX Power Supply: VDC (/ -0%) SELV, W MAX. Oper Temp: -0 TO 0 C Rev: Date Code: C00 MADE IN CANADA DO NOT HIPOT / DIELECTRIC TEST THIS DEVICE COMPLIES WITH PART OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: ) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND ) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Customer Satsfacton for Techncal Support or E Vdc Input Dsplay Lnk Power Com 0 DG - DG- DG- 0/00 T TX R L SH SH D D D X nk M B A.- Eaton Advanced Meters Power Xpert Meter 000/000/000 Seres November 0 Sheet 00.0 (.). (.). (.).0 (.0) 0. (.) X # Thread Thread Depth Ref. (.).00 Ref. (.) PowerXpert EVENTS.0 (.0). (.). Ref. (.) BACK Push to Hold n for Select Turn to Help Hghlght C O 0.0 (.) Fgure.-. Power Xpert Meter 000/000/000 Multmeter Graphc Dsplay (PXD-MMG) Sold Separately, Supports up to Power Xpert Meter 000/000/000 Modules. (.) 0. (.).00 Ref. (0.) 0 0. (0.) Fgure.-0. Power Xpert Meter 000/000/000 Module.0 (0.) (.) For more nformaton, vst: CA0000E

23 November 0 Sheet 00 Eaton Advanced Meters Power Xpert Meter 000/000/000 Seres.- Power Xpert Meters Confguraton and Wrng Examples Up to Meters can be Dasy-Chaned to a Sngle Power Xpert Meter LCD Dsplay Modbus RTU (RS-) Master Power Xpert Software Web Browser Modbus TCP Master Up to Dsplay Lnk (RS-) Modbus RTU (RS-) Fgure.-. Dsplay Lnk Modbus RTU (RS-) Master Dsplay Lnk (RS-) Fgure.-. Web EnabledAdvanced System Functonalty Fgure.-. Modbus RTU (RS-)Non-Web Enabled Modbus RTU (RS-) Master Modbus RTU (RS-) Dsplay Lnk (RS-) Web Browser Modbus TCP Master Up to Flow Meter (Pulse Count) Alarm Rack Montorng Open Door/Tamper Swtch Trp and Sequence of Events Eght programmable dgtal nputs Two sold-state programmable outputs Three relay programmable outputs 0 Fgure.-. AccessoresI/O Card (Opton) Modbus RTU (RS-) Up to Water Leak and Vbraton Sensors Dsplay Lnk (RS-) Fgure.-. Web EnabledBrowser and Modbus TCP Rack Montorng Open Door/ Tamper Swtch Alarm Smoke Alarm Eght programmable dgtal nputs Two sold-state programmable outputs Three relay programmable outputs Fgure.-. IT Confguraton ExamplesAccessores I/O Card (Opton) 0 CA0000E For more nformaton, vst:

24 .- Eaton Advanced Meters Power Xpert Meter 000/000/000 Seres November 0 Sheet Orderng Informaton To order a Power Xpert Meter 000/ 000/000, the catalog number should be determned usng the chart shown n Table.-. The chart llustrates how to nclude the desred factory optons as part of a catalog number. Opton cards that are selected at tme of order entry wll be nstalled at the factory. Opton cards are also feld nstallable for feld upgrades. If a dsplay s requred, t should be ordered separately. The Mult-Meter Graphc Dsplay s capable of dsplayng data from an RS- dasychan of up to Power Xpert Meter 000/000/ 000 meter modules over a dstance of up to 000 ft. Power Xpert meter modules nclude panel mountng brackets. The Mult-Meter Graphc Dsplay s desgned to mount separately. If back-to-back meter to dsplay panel mountng s desred, a mountng bracket kt s avalable (PX-PMBA). Example : PXMABB (PXM 000 Meter, w/vaux, Std. Pwr, Com. Exp. and I/O Cards) Example : PXMABA (PXM 000 Meter, w/vaux, Std. Pwr, Com. Exp. Card) Table.-. Power Xpert 000/000/000 Meter Catalog Numberng System Model Seres = 000 (standard power qualty), GB = 000 (enhanced power qualty), GB = 000 (premum PQ w/ transent capture), GB Voltage Input Confguraton 0 = Standard (V, V, V, V ) = Standard plus auxlary (V, V, V ) Power Supply Confguraton = Standard 00 0 Vac or 0 0 Vdc power supply PXM 0 A B B Table.-. Power Xpert Meter 000/000/000 Accessores Descrpton Card Slot Confguraton A = No card opton B = I/O opton card (eght dgtal nputs, two sold-state outputs, three relay outputs) Card Slot Confguraton A = No card opton B = Communcaton expanson card for LAN/WAN Ethernet networkng w/0/00base-t, 00F, RS-, RS- Ports Card Slot Confguraton = Standard communcatons module wth RS- Example : PXMABB (PXM 000 Meter, w/vaux, Std. Pwr, Com. Exp. and I/O Cards) Example : PXMABA (PXM 000 Meter, w/vaux, Std. Pwr, Com. Exp. Card) Dgtal I/O Card: eght dgtal nput, two sold-state output, three relay output Communcaton expanson card for LAN/WAN Ethernet networkng: 00FX fber-optc, 0/00T, RS-, RS- Graphc dsplay module Panel-mountng bracket assembly for back-to-back meter to graphc dsplay mountng Panel-mountng bracket assembly for retrofttng a graphc dsplay to an IQ Analyzer cutout Panel-mountng bracket assembly for reduced graphc dsplay rear clearance Catalog Number PXMIO-B PXMCE-B PXD-MMG PX-PMBA PX-PMBB PX-PMBC Power Xpert Meter 000 to 000 lcense upgrade key PXM-KUPG Applcable to PXM 000 Meters only. Upgrade package to be feld loaded by customer. Provdes enhanced PXM 000 functonalty n an exstng PXM 000 Meter, ncludng ITIC and calendar functons. Note: Communcaton cable (standard Modbus RTU) s not ncluded n the package for meter module connecton. Techncal Data Envronmental Condtons Operatng temperature: Meter: 0 to 0 C Dsplay: 0 to 0 C operatng Storage temperature: 0 to C Operatng humdty: % condensng Devce weght:. lbsmeter. lbsdsplay Meter and back of dsplay are polluton degree Elevaton to ft (000m) Current Inputs (Each Channel) Converson: 0 samples per cycle delta-sgma converter dgtally fltered down to samples per cycle CT Input: 0 rms samples per cycle delta-sgma converter dgtally fltered down to samples per cycle for ant-alasng Burden: less than 0 mllohms Overload wthstand: 00A for second, non-repeatng Range: A contnuous Accuracy: 0.0% or readng plus 0.0% of full scale (from 0 mllamps to 0A) Voltage Inputs (Each Channel) Converson: 0 rms samples per cycle delta-sgma converter dgtally fltered down to samples per cycle for ant-alasng PT nput: 0 00,000V prmary Input range: 00V L-L, L-N drect connect Nomnal full scale: 000V rms Input mpedance: megohms Frequency Range Hz Harmonc Response (Voltage, Current) th harmonc Accuracy ANSI C.0 0. Class IEC 0. Class Dscrete Inputs Self sourced: Vdc Relay Output Contacts A maxmum, 0 Vac maxmum, 0 Vdc maxmum Lfetme:,000,000 no load operatons 00,000 under rated voltage and load Sold-State Outputs Maxmum load: 00 mllamps Max. voltage: 0V (externally sourced) Control Power Input Input range AC: 00 0 Vac (±0%) Frequency range: Hz Input range DC: 0 0 Vdc ±0% Burden 0 VA Rde-through: s For more nformaton, vst: CA0000E

25 November 0 Sheet 00 Eaton Advanced Meters Power Xpert Meter 000/000/000 Seres.- Ethernet-Ready Power Qualty & Energy (PQ&E) Power Xpert Meters General Descrpton One or more Ethernet-ready PQ&E Power Xpert Meters may be deployed n varous power dstrbuton and motor control applcatons. Layout Dagrams Modbus Master Equpment Power Xpert Meter 000 Power Xpert Meter 000 Power Xpert Meter 000 Optons Ethernet Expanson CardCEC (recommended one per meter) Local dsplay (one per meters) Communcaton Interfaces Modbus RTU (RS-) (standard) Dsplay lnk (RS-) (standard) Modbus TCP/IP (wth CEC) HTTP (wth CEC) FTP (wth CEC) SMTP (wth CEC) SNMP (wth CEC) XML/SOAP (wth CEC) DNP.0 (wth CEC) Applcaton Descrpton Meterng/Montorng Applcatons Identfy power qualty problems, vew waveforms, montor crcut loadng, and manage energy use va standard Web browser (PXM 000/000/000) Vew ITIC plots, Enhanced Power Qualty Index (PQI), and event/ calendar vew va Web browser (PXM 000/000) Detect and record hgh-speed transents (PXM 000) Installaton Applcatons Low voltage swtchgear Medum voltage swtchgear Low voltage motor control centers Medum voltage motor starters Fgure.-. Power Xpert Meter Used n a Modbus RS- Network Applcaton Ethernet Network Power Xpert Software Modbus RS- Network Buldng Management System Web Browser Fgure.-. Power Xpert Meter Used n an Ethernet Network Applcaton Network Tme Server XML/SOAP Modbus TCP/IP HTTP NTP eolr 0 Communcatons Applcatons Buldng Management System (BMS) Energy Management Systems Network Management Systems HMI Power Xpert Software Foreseer Software 0 CA0000E For more nformaton, vst:

26 .-0 Eaton Advanced Meters Power Xpert Meter 000 Seres November 0 Sheet Power Xpert Meter 000 Seres Power Xpert Meter 000 Seres General Descrpton The Power Xpert Meter 000 Seres power qualty nstrument montors the most crtcal aspects of an electrcal dstrbuton system. Ths premer power qualty meterng nstrument uses the latest n advanced technology to make t smple to use, powerful, scalable and hghly flexble. The Power Xpert Meter 000 offers the same level of ntutve user nterface desgn as the Power Xpert Meter 000/000/000, presentng crtcal electrcal dstrbuton system nformaton n a smple to navgate and easy-to-understand nformaton archtecture. The embedded Web server dsplays comprehensve power qualty data usng standard Internet browsers and allows for devce confguraton from the browser. The embedded Web server presents real tme, hstorcal, and event nformaton n a browserstyle graphcal format to help the user nterpret nformaton such as current loadng, voltage and power levels, power factor, energy usage, I/O status, power qualty measurements, as well as harmonc plots. The embedded Web server also allows for waveform capture and for vsualzng steady-state harmonc content that s crtcal for power qualty analyss. The Web server provdes the energy and demand readngs requred to help manage the cost of energy. Applcaton Descrpton Identfy Power Qualty Problems to Help: Protect motors from damage Preserve the ntegrty of processes and batches Prevent blown capactor bank fuses Protect transformers and conductors from overheatng Montor Crcut Loadng to Help: Avod overloads and nusance overload trps Maxmze equpment utlzaton Manage emergency overloads Manage Energy Utlzaton to Help: Reduce peak demand charges and power factor penaltes Identfy excessve energy consumpton Metered/Montored Parameters Note: See Table.-. Volts: L-L, L-N, Avg. L-L, Avg. L-N Phase and neutral currents Power: real, reactve and apparent Frequency Power factor: apparent Energy: real, forward, reverse, sum Demand: peak wth date and tme % THD Mnmum and maxmum values Harmoncs Indvdual harmoncs Demand comparsons Phasors Accuracy Note: Under typcal operatng condtons. Currents: 0.% RV Voltage: 0.% RV Energy, and demand power: 0.% n accordance wth ANSI C.0 Frequency: ±0.0 hertz Power factor: 0.% RV Communcatons Multple communcatons ports ncludng: Standard RS- Modbus RTU Slave port 0/00Base-T Ethernet network port Communcaton Protocols Supported Modbus RTU Modbus TCP BACnet/IP Ethernet TCP/IP HTTP, HTTPS NTP (Network Tme Protocol) SMTP (Smple Mal Transfer Protocol) SNMP (Smple Network Management Protocol) v, v DNP.0 Physcal Characterstcs Power Xpert Meter 000 wth ntegral dsplay Power Xpert Meter 000 transducer only (no dsplay) meter module NEMA ratng: NEMA, IP front of panel ratng Meter wth Integral Dsplay Dmensons Heght:. nches (. mm) Wdth:. nches (. mm) Depth:. nches (00. mm) behnd panel surface.0 (. mm) projecton n front of panel surface Standards and Certfcatons UL/cUL Electrcal and Electronc Measurng and Test Equpment CZ Accuracy: IEC/EN0 0. class, ANSI C.0 0. Class ANSI C. Burst CE Mark For more nformaton, vst: CA0000E

27 November 0 Sheet 00 Eaton Advanced Meters Power Xpert Meter 000 Seres.- Power Xpert Meter 000 Embedded Web Server The Power Xpert Meter 000 embedded Web server offers Eaton customers a new level of accessblty to the crtcal nformaton requred to manage ther electrcal dstrbuton system. The Web server ncludes real-tme nformaton n both numerc and graphcal vsual formats to help montor parameters such as current loadng, voltage and power levels, power factor, THD, and more. The Web server also provdes energy and demand readngs wth graphc usage plots to help analyze energy usage patterns. Energy readngs nclude kwh, kvarh, delvered and receved and kvah wth tme. The Power Xpert Meter 000 embedded Web server supports graphcal trend charts of key measurements such as current, voltage, power and energy. The trend chart supports a zoom feature that allows the user to vew data over predefned ranges from as lttle as hours to as much as years. The trend chart ncludes zoom n/out buttons and a horzontal slder bar control to manage scrollng forward and backward through the data. Trend charts of basc readngs nclude mnmum, maxmum and average readngs. Trend charts of nterval by nterval energy data also dsplay peak demand. Waveform Dsplay Sxty cycles of waveform are sampled at 00 samples per cycle. The Power Xpert Meter 000 embedded Web server offers a vew of a sngle-cycle waveform to vsualze steady-state harmonc content. Waveforms are presented va a Web browser. By clckng refresh, the waveform s updated to that perod n tme. Waveform Recordng The Power Xpert Meter 000 can record waveforms at up to samples per cycle. Waveform captures are automatcally stored on the FTP server n the IEEE standard COMTRADE fle format. Ths allows users to vew and analyze the waveforms n any standard free-of-charge or commercal COMTRADE fle vewer. Hstorcal Trend Loggng The Power Xpert Meter 000 records hstorcal data for graphcal vewng from the embedded Web server. Graphcal vews of hstorcal data support pan and zoom. Over 00 standard meterng parameters are logged as part of the standard meter functonalty ncludng mn./max. and average for each parameter. The averages are calculated over the nterval perod. Energy Profle Data The Power Xpert Meter 000 records Real and Reactve energy forward, reverse, net and absolute sum, as well as Apparent energy (kvah). These readngs are stored on a fxed mnute nterval. Up to status nputs can be confgured as energy accumulators for countng KYZ pulse nputs. Demand Comparsons Demand usage patterns can be analyzed wth the month-to-month, week-to-week comparson chart bult nto the meter. Raw data can be exported as a.csv fle wth the Save Table opton to other applcatons for further analyss and graphng. Event Trggers The Power Xpert Meter 000 has two levels of confgurable event trggers: On-board meter lmts (PXM 0/ 0/0/0) On-board gateway card lmts The on-board meter lmts can be set for any measured parameter, for up to lmts. If ether of the lmts are exceeded, an alarm condton wll be present and llumnate one of the LEDs on the meter faceplate. The on-board meter out of lmts can also be used to energze a relay output, f so equpped. The on board gateway lmts can trgger an alarm off of any measured parameter on any of the PXM 000 model seres. These trggers permt pckup, reset and pckup delay to be confgured by the user. Event Loggng The Power Xpert Meter 000 embedded Web server allows the user to vew a lst of trggered events. In addton, a separate system log records system operatons such as resets. E-mal The Power Xpert Meter 000 contans the ablty to send e-mals based on an event that has been trggered or cleared along wth the opton to send an event or data log fle. The Power Xpert Meter 000 also has the ablty to send a confgurable perodc e-mal wth meter nformaton. Inputs and Outputs Power Xpert Meter 000 s avalable wth a standard KYZ output. The base meter also ncludes two expanson slots for plug-n cards. See Fgure.- on Page.- for detals. The Power Xpert Meter 000 embedded Web server card takes up one of these opton slots, leavng an addtonal slot that can be populated by one of the followng I/O cards. Two relay outputs/two status nputs Four KYZ pulses/four status nputs Four analog outputs 0 ma Four analog outputs 0 ma Inputs can also be confgured for demand synch and pulse countng. Inputs selected for pulse countng can be scaled. Accumulated pulse recordngs are mantaned n profle memory. Outputs can be used for alarm annuncaton. Ratngs Applcaton to any PT rato, no PTs requred to 00 Vac CT ratos to any CT rato CT nputs avalable as or A secondary Separate Source Control Power Input: 0 Vac or 00 0 Vdc Low voltage 0 Vdc Dsplayed Informaton Montored nformaton s avalable locally through the dsplay, the Web browser or system power management software True rms values through 0th harmonc ANSI C.0 Class 0.% revenue meterng specfcaton 0 0 CA0000E For more nformaton, vst:

28 .- Eaton Advanced Meters Power Xpert Meter 000 Seres November 0 Sheet 00 Power Xpert Meter 000 Web Browser Vews Harmonc Spectral Plot Energy Demand Profle 0 Power Xpert Meter 000 Web Browser Power Xpert Meter 000 s embedded Web server offers Eaton customers a new level of accessblty to the crtcal nformaton requred to manage the electrcal dstrbuton system. The embedded Web server ncludes real tme crcut nformaton n both numerc and graphcal formats to help montor parameters such as current loadng, voltage and power levels and power factor. The Web server also provdes the energy and demand readngs requred to help manage the cost of energy. Readngs nclude kwh, kvarh, delvered and receved and kvah. The Web server also ncludes crtcal nformaton regardng Power Qualty such as harmonc dstorton. Real-Tme Vsualzaton of Harmonc Content The Web server offers a waveform vew to vsualze steady-state harmonc content of the voltage and current to spot power qualty problems. The harmonc spectral plot dsplays harmoncs up to the 0th order. A detaled table also ncludes ndvdual magntudes and angles of current and voltage harmoncs, at each frequency. Indvdual and total THD are dsplayed for dagnostc purposes. Hstorcal Trend Plot Graphcal Trendng of Data The Power Xpert Meter 000 embedded Web server supports graphcal trend charts of key crcut measurements such as current, voltage, power and energy. The trend chart supports a zoom feature that allows the user to vew data over a short perod of hours or a longer perod of months. The trend chart has a horzontal slder bar control to manage scrollng forward and backward through the data. Trend charts of basc readngs nclude mnmum, maxmum and average readngs. Trend charts of energy data also dsplay demand values. Energy Managers can vew load profle data compared aganst the peak demand. The plot allows comparson of present and past months usage. Web Server Devce Confguraton Specal software s not requred to confgure a Power Xpert Meter 000. The embedded Web server ncludes a comprehensve devce confguraton engne. Dscrete Contact Inputs The optonal I/O expanson cards offers two or four dgtal nputs that are useful for a varety of applcatons such as: Pulse Countng of KYZ or other utlty pulses such as ar, water or gas Demand nterval tmng taken from a master utlty meter end of nterval pulse Names can be confgured for each nput for ease of use. 0 For more nformaton, vst: CA0000E

29 November 0 Sheet 00 Eaton Advanced Meters Power Xpert Meter 000 Seres.- Relay Outputs The optonal I/O card ncludes two A Form C relay outputs rated for 0 Vac or 0 Vdc or Form A sold-state outputs. These outputs can be used for applcatons such as Alarm annuncaton KYZ pulse output Alarm outputs can be drven from trggers based on meterng values. Analog Outputs The optonal IO card ncludes ether four 0 ma outputs or 0 ma outputs. These outputs can be used for applcatons such as: Input to BMS or PLC systems for trackng a measured meter parameter Standard Communcatons Card The standard communcatons card provdes one Ethernet connecton and 0/00Base-T port (copper only) that can be used for the followng applcatons: Montorng, managng and confgurng the meter remotely usng a standard Web Browser nterface Alarm notfcatons va e-mal, SMTP Provdng Modbus TCP/IP, RTU and BACnet/IP communcatons to BMS systems Provdng SNMP communcatons to NMS systems Synchronzng wth an NTP server Asset management Updatng frmware on the meter Fgure.-. PXM 000 Rear Vew Power supply nputs System voltage nputs NEMA gasket RS- KYZ out Meter gateway card I/O slot 0 0 CA0000E For more nformaton, vst:

30 .- Eaton Advanced Meters Power Xpert Meter 000 Seres November 0 Sheet 000 N A B C N A B C 0 Vac 00 0 Vdc Optonal 0 Vdc HI Ic LO HI Ib LO HI Ia LO GND L () N ( ) VRef A B C Control Power Supply HI Ic LO HI Ib LO HI Ia LO GND L () N ( ) VRef A B x Power Supply N A B C B C A C B A N A B C 0 Fgure.-0. Servce: Wye or Delta, Four-Wre wth No PTs, Two or Three CTs Note: Based upon the voltage ratng, you may need a control power transformer for the control power. A B C HI Ic LO HI Ib LO HI Ia LO GND L () N ( ) VRef A B C 0 Vac 00 0 Vdc Optonal 0 Vdc Control Power Supply C or C B A B A 0 Not Connected to Meter A B C Fgure.-. Servce: Delta, Three-Wre wth No PTs, CTs Note: Based upon the voltage ratng, you may need a control power transformer for the control power. For more nformaton, vst: CA0000E

31 November 0 Sheet 00 Eaton Advanced Meters Power Xpert Meter 000 Seres.- Power Xpert Meters Confguraton and Wrng Examples Modbus RTU (RS-) Master Power Xpert Software Web Browser Modbus TCP Master Buldng Automaton System Water Leak & Vbraton Sensors Modbus RTU (RS-) Connectons: = Ethernet(Modbus TCP and BACnet/IP = Modbus RTU (RS-) Fgure.-. Web EnabledAdvanced System Functonalty Alarm Fgure.-. IT Confguraton ExamplesAccessores I/O Cards (Opton) Rack Montorng Open Door/ Tamper Swtch Smoke Alarm Two relay programmable outputs/two programmable nputs Four KYZ pulses/two programmable nputs Four programmable analog outputs Flow Meter (Pulse Count) Rack Montorng Open Door/ Tamper Swtch 0 Alarm Two relay programmable outputs/two programmable nputs Four KYZ pulses/four programmable nputs Four programmable analog outputs Fgure.-. AccessoresI/O Cards (Opton) Trp and Sequence of Events 0 CA0000E For more nformaton, vst:

32 .- Eaton Advanced Meters Power Xpert Meter 000 Seres November 0 Sheet 00 PXM 000 Dmensons. (.) 0.0 (.0). (.). (.).0 (.) Fgure.-. PXM 000 Dsplay Front Vew 0. (.0). (.) Fgure.-. PXM 000 Meter/Dsplay Sde Vew 0. (.) 0. (.). (.) 0. (.) Fgure.-. PXM 000 Transducer Only Sde Vew 0. (.). (.) x.0 (0.).0 (0.). (.0). (.0). (.) Fgure.-. PXM 000 Rear Vew Fgure.-. ANSI Mountng Panel Cutout Fgure.-0. DIN Mountng Cutout. (.) 0 For more nformaton, vst: CA0000E

33 November 0 Sheet 00 Eaton Advanced Meters Power Xpert Meter 000 Seres.- Orderng Informaton To order a Power Xpert Meter 000, the catalog number should be determned usng the chart shown n Table.-. The chart llustrates how to nclude the desred factory optons as part of a catalog number. Opton cards that are selected at tme of order entry wll be nstalled at the factory. Opton cards are also feld nstallable for future upgrades. Table.-. Power Xpert Meter 000 Catalog Numberng System Model Seres 0 = Energy meter 0 = Power qualty meter 0 = Power qualty plus meter 0 = Power qualty plus wth up to samples/cycle waveform recordng meter 0 = Power qualty plus wth up to samples/cycle recordng meter Meter Type M = Meter (wth ntegral dsplay) T = Transducer only (no dsplay) Refer to Table.- for model-specfc features. Table.-. Power Xpert 000 Meter Accessores Descrpton Panel-mountng bracket assembly for retrofttng a PXM 000 to an IQ Analyzer/IQ DP-000/IQ data cutout PXM 000 gateway card kt to upgrade an IQ 0/0 to a PXM 000 Table.-. Power Xpert Meter 000 I/O Cards Descrpton PXM 000 I/O card relay outputs/ status nputs PXM 000 I/O card KYZ pulses/ status nputs PXM 000 I/O card analog outputs 0 ma PXM 000 I/O card analog outputs 0 ma Power Xpert Meter modules nclude panel mountng brackets. Example : PXM0MA (PXM 0 Meter/Dsplay 0 Hz, A, 0 Vac/Vdc W/AO). Example : PXM0MA0 (PXM 0 Meter/Dsplay 0 Hz, A, 0 Vac/Vdc). PXM 0 M A 0 Frequency = 0 Hz system = 0 Hz system Power Supply = 0 Vac/Vdc = 0 Vdc Current Input = A secondary = A secondary Example : PXM0MA (PXM 0 meter/dsplay 0 Hz, A, 0 Vac/Vdc W/AO) Example : PXM0MA0 (PXM 0 meter/dsplay 0 Hz, A, 0 Vac/Vdc) Catalog Number IQ0-PMAK PXM000-GCK Catalog Number IQ0/0-IO IQ0/0-IO IQ0/0-IO IQ0/0-IO I/O Slot = Gateway card I/O Slot 0 = None = Two relay outputs/two status nputs = Four KYZ pulses/four status nputs = Four analog outputs: 0 ma = Four analog outputs: 0 ma 0 0 CA0000E For more nformaton, vst:

34 .- Eaton Advanced Meters Power Xpert Meter 000 Seres November 0 Sheet 00 0 Techncal Data PXM 000 Seres Electronc Power Meter Techncal Informaton Current Inputs Class 0: A nomnal, 0A maxmum Class : A nomnal, A maxmum Fault current wthstand: 00A for 0 seconds 00A for seconds 00A for second Contnuous current wthstand: 0A for screw termnated or passthrough connectons Programmable current: full scale to any CT rato Burden: 0.00 VA per phase maxmum at A Pckup current: 0.% of nomnal Class 0: ma Class : ma Connectons: Pass-through wre gauge dmenson: 0. nches (. mm) Quck connect: 0.-nch (. mm) male tab Voltage Inputs Range: Lne-to-neutral 0 Vac Lne-to-lne 0 Vac Programmable voltage range: full scale to any PT rato Supported systems: element wye,. element wye element delta, four-wre delta systems Input mpedance: megohm/phase Burden: 0. VA/phase maxmum at 00V; 0.0 VA at 0V Connecton: -pn 0.00-nch pluggable termnal block, AWG # (0.. mm ) Isolaton All nputs and outputs are galvancally solated to 00V Envronmental Ratngs Operatng temperature: 0 to 0 C Storage temperature: 0 to 0 C Operatng humdty: to % RH noncondensng Faceplate ratng: NEMA Mountng gasket ncluded Sensng Method Voltage, current: true rms Power: samplng at over 00 samples per cycle on all channels Harmoncs Resoluton: 0th order Update Rate Watts, VAR and VA: 00 msec at 0 Hz All other parameters: second at 0 Hz Power Supply AC/DC voltage opton: 0 Vac at 0/0 Hz or 00 0 Vdc, unversal AC/DC supply Low voltage DC voltage opton: 0 Vdc Burden: 0 VA maxmum Seral Communcatons Format Connecton type: RS- (through back plate) Com port baud rate: 00,00 bauds Com port address: 0 Data format: -bt, no party Protocols: Modbus ASCII, RTU or DNP.0 Network Communcatons Format Connecton type: RJ- 0/00Base-T Ethernet Network port Protocols: Ethernet TCP/IP, Modbus TCP, BACnet/IP, HTTP, HTTPS, NTP, SMTP, SNMP KYZ Pulse Contacts: Form A On resstance, maxmum: ohms Peak swtchng voltage: 0 Vdc Contnuous load current: 0 ma Peak load current: 0 ma (0 ms) Off-state leakage current at 0 Vdc: ua Opto-solaton: 0 Vac Dmensons and Shppng Weght: lbs (0. kg) Basc unt: H.00 x W.0 x L.00 nches (H.0 x W. x L.0 mm) PXM 000 Seres: mounts n.-nch (.0 mm) DIN and ANSI C. round cut-outs Shppng contaner dmensons:.00-nch (. mm) cube Tolerance: ±0. nches (. mm) Complance IEC/EN0: 0.% accuracy ANSI C.0: 0.% accuracy ANSI C.: burst UL/cUL: Electrcal & Electronc Measurng & Test Equpment CZ CE 0 For more nformaton, vst: CA0000E

35 November 0 Sheet 00 Eaton Advanced Meters Power Xpert Meter 000 Seres.- Power Xpert Meter 0 Measures basc meter parameters MB for data loggng Ethernet On-board gateway card lmts/alarms Power Xpert Meter 0 Features of PXM 0 plus: Harmoncs On-board meter hardware lmts to actvate optonal relay outputs Vsual ndcaton of lmts exceeded at meter face MB for data loggng Power Xpert Meter 0 Features of PXM 0 plus: Harmoncs, ncludng ndvdual Waveform vew to vsualze steady-state harmonc content MB for data loggng Power Xpert Meter 0 Features of 0 plus: Up to samples per cycle for waveform recordng Confguraton of total, pre- and post-event cycles. Power Xpert Meter 0 Features of 0 plus: Up to samples per cycle for waveform recordng Table.-. Power Xpert Meters 0/0/0Features and Benefts Feature Power Xpert Meter Beneft General Embedded Web Server Use a standard Web browser to montor and manage the meter over the network, Internet. Frmware flash update support Enables you to flash the meter wth the latest frmware updates. Power, Energy and Demand Voltage, current: per phase mnmum, maxmum, average, trend graph analyss, export, prnt Demand plot comparsons month-to-month, week-to-week Revew voltage and current trends, export, prnt and analyze parameters rght on the meter or external software. Plot two months or two weeks for vvd demand comparson. Power, apparent, real, reactve, power factor Revew power usage and power factor and avod potental PF penaltes. Energy, demand: forward, reverse, net, sum, TOU, profle, export, prnt Power Qualty Analyss Keep track of your energy usage, dentfy peaks to conserve energy usage. Statstcal analyss (mnmum, maxmum, average) Revew statstcal trends, dentfy past and future problem areas. Samplng rate, maxmum samples/cycle Hgh samplng rate resultng n hgh accuracy. Securty Secure two level user access prvleges Defne approprate securty access level per user. Communcatons Modbus TCP Easy ntegraton wth standard protocol to power management and other software. Modbus RTU Integrate meters to exstng Modbus networks, dasy chan several ( ) meters together. HTTP, HTTPS Communcate to the meter over the Internet va standard Web browser. SNMP (Smple Network Management Protocol) Communcate wth the meter va Smple Network Protocol; hook to exstng NMS system. SMTP (Smple Mal Transfer Protocol) Send e-mal messages va standard Smple Mal Transfer Protocol. NTP (Network Tme Protocol) Network Tme Protocol support enables the meter to synchronze tme over the network. DNP.0 Easy ntegraton wth seral DNP networks. Trend measurements CSV fle export Easly export trend measurements to thrd-party applcatons, n standard CSV fle format. Note: These specfcatons are subject to change wthout notce and represent the maxmum capabltes of the product wth all optons nstalled. Ths s not a complete feature lst. Features and functonalty may vary dependng on selected optons, frmware verson and product model. Please refer to the techncal data sheet and user manual for detaled specfcatons. 0 0 CA0000E For more nformaton, vst:

36 .-0 Eaton Advanced Meters Power Xpert Meter 000 Seres November 0 Sheet 00 0 Table.-. Power Xpert Meters 0/0/0Features and Benefts (Contnued) Feature Power Xpert Meter Beneft Logs Trend loggng Log trend nformaton for easy statstcal analyss. Load profle Revew the load profle graph to get a better understandng of your electrcal load versus tme. Event loggng Log events for retrospectve event analyss. Memory and Storage Standard memory, MB Store trend data and events for hstorcal analyss. Harmoncs Harmonc levels 0th 0th 0th 0th Allows you to dentfy potental harmful harmoncs. Total Harmonc Dstorton (THD) Revew the total harmonc dstorton level drectly on the meter. Indvdual harmoncs Provdes smple metrc for power qualty vewable from the embedded Web server. Waveform Waveform dsplay Waveform vew on a PC to vsualze steady-state harmonc content through embedded Web server to dentfy power qualty ssues. Waveform recordng Ablty to record waveforms up to specfed samples/cycle. I/O I/O Two relay outputs/two status nputs Four KYZ pulses/four status nputs Four analog outputs 0 ma Four analog outputs 0 ma Optonal Optonal Optonal Optonal Optonal The Power Xpert Meter 000 I/O Cards are extremely flexble and can be used n a large varety of dfferent applcatons. Dgtal nputs and relay outputs can be programmed to nteract durng varous condtons defned by the user. Varous thrd-party devces, such as alarms, pulse meters, trp unts and sensors, can be easly ntegrated to the Power Xpert Meter 000. Trggers and events can be ted to the meter s standard functons such as e-mal, logs and trends. Analog outputs can be programmed to output meter parameters to BMS or PLC systems. Note: These specfcatons are subject to change wthout notce and represent the maxmum capabltes of the product wth all optons nstalled. Ths s not a complete feature lst. Features and functonalty may vary dependng on selected optons, frmware verson and product model. Please refer to the techncal data sheet and user manual for detaled specfcatons. 0 For more nformaton, vst: CA0000E

37 November 0 Sheet 00 Eaton Advanced Meters Power Xpert Energy Vewer.- Power Xpert Energy Vewer General Descrpton The Power Xpert Energy Vewer (PXEV) provdes the means to develop an energy usage baselne for energy management programs, comparng nterval logged data ponts. It s a free Web download for compatble Eaton product home pages. Ths tool allows easy nterpretaton of the data collected by compatble devces va graphcal charts, graphs and reports wthout havng to export the avalable.csv fle nto Mcrosoft Excel or another tool. Applcaton Descrpton The PXEV s a versatle tool suted for a wde range of customer applcatons. Two basc examples are presented below. Schools and Dormtores An excellent applcaton for the PXEV s a Schools and/or Dormtory scenaro where each elementary school n a school dstrct or college dorm (buldng) on a campus has a three-phase man meter. The PXEV could be used to graphcally compare each buldng, thus determnng whch s the most energy effcent. Montorng Secondary Transformers PXEV users can montor the secondary of three-phase transformers (kva) to compare transformer loadng over tme. Ths determnes the unused, avalable capacty when expanson projects are planned and engneers need to determne f addtonal power transformers need to be purchased/ nstalled. In the case where more transformers are not necessary to carry the expanson load, the nformaton from the PXEV can assst n provdng sgnfcant monetary savngs. Features Quckly add an Eaton devce specfed above usng ts IP address Compare two devces energy usage Compare last month to the current month Develop an energy baselne Customze/specfy values from the source: Invert values Magntude Resoluton Interpolaton Customze data range for summary data The fnal report conssts of four tabs. The frst tab, the Power tab, shows the statstcs on the raw power data. The Day, Week and Month tabs show the statstcs for energy, calculated by ntegratng the power over the correspondng nterval duraton. Users can select up to four dfferent devces for energy comparson. Compatble Devces Power Xpert Meter 000 seres Power Xpert Meter 000/000/ 000 seres Power Xpert Gateway 00A (connected devces that capture watt and kwh values,.e., IQ 00 seres) Power Xpert Gateway PDP card Power Xpert Gateway Seres 000 card Summary Report: Select the dfferent tabs to vew the approprate energy values. The Power tab shows kw or MW power on a -mnute demand wndow (normal settng on our devces). The Day/Week/Month tabs show kwh or MWh for those tme perods. Comparson Summary: Users can select up to four dfferent devces for energy comparson. Ths graphc shows two devces. 0 0 CA0000E For more nformaton, vst:

38 .- Eaton Advanced Meters IQ 0/0 Seres November 0 Sheet IQ 0/0 Seres Electronc Power Meters IQ 0/0 Electronc Power Meter General Descrpton The IQ 0 and IQ 0 meters provde capabltes you would not normally expect n affordable, ultra-compact meters, such as fast samplng rate and accurate meterng for a full range of power attrbutes. Provdng the frst lne of defense aganst costly power problems, Eaton s IQ 0 and IQ 0 electronc power meters can perform the work of an entre wall of legacy meterng equpment usng today s technology. When space s at a premum, yet you need ANSI C.0 accuracy, the IQ 0/ 0 seres ft the bll. These meters are deal for electrcal equpment assembles, machne control panels, such as panelboard and swtchboard mans and feeders, low voltage metal-enclosed swtchgear feeders and motor control centers. Requrng far less space than other meters wth smlar functonalty, IQ 0/0 seres ft nto a standard ANSI or IEC cutout on a panelboard or other electrcal equpment, and therefore ft easly nto retroft applcatons. Applcaton Descrpton Utlty and commercal meterng Substatons, ndustral facltes, power generaton stes and campuses Submeterng Load studes and voltage recordng Analog meter replacement Features and Benefts Measure and dsplay real-tme nformaton about crtcal power parameters wth a samplng rate of 00 samples per cycle Montor power utlzaton and qualty wth ANSI C.0 accuracy (0.%) Optonal KB for data loggng, whch guards aganst loss of hstorcal data Addtonal Features Verfy meter accuracy wth KYZ test pulse self-certfcaton capabltes Standard Modbus RTU communcatons Avalable as transducer only or wth dsplay Feld upgradeable to a Power Xpert Meter 000 Integrate nto Eaton s Power Xpert Archtecture for a holstc systemlevel vew Table.-. Features of IQ 0 and IQ 0 Electronc Power Meters Features IQ 0 IQ 0 Instrumentaton Current, per phase Current demand Calculated neutral current Voltage, per phase (L-L, L-N) Frequency Power, Energy and Demand Real, reactve and apparent power, total and per phase (kw, kvar, kva) Real, reactve and apparent energy, total and per phase (kwh, kvarh, kvah) Real, reactve and apparent power demand Power factor, total and per phase Mn./max. readngs, I, V, PF, F, THD (IQ 0), kw, kvar, kva Demand Methods Block nterval (sldng, fxed) Data Loggng KB for data loggng Optonal Optonal Communcatons RS- KYZ output Modbus RTU Modbus ASCII DNP.0 I/O Two dgtal n/two dgtal out Optonal Optonal Four dgtal n/four KYZ out Optonal Optonal Four analog output ( 0 ma) Optonal Optonal Four analog output (0 ma) Optonal Optonal Power Qualty Analyss Total Harmonc Dstorton (THD) voltage and current per phase Alarmng Set pont drven alarm Dgtal Out wth IQ 0 requres external command. Requres external power supply. For more nformaton, vst: CA0000E

39 November 0 Sheet 00 Eaton Advanced Meters IQ 0/0 Seres.- Techncal Data and Specfcatons Table.-0. IQ 0/0 Electronc Power Meter Techncal Informaton Descrpton Specfcatons Current Inputs Class 0 Amp. nomnal, 0A maxmum Class A nomnal, A maxmum Fault current wthstand 00A for: 00A for: 00A for: Contnuous current wthstand Programmable current Burden Pckup current Class 0 Class Connectons Pass-through wre gauge dmenson Quck connect Voltage Inputs Range Lne-to-neutral Lne-to-lne Programmable voltage range Supported systems Input mpedance Burden Connecton 0 seconds seconds second 0A for screw termnated or pass-through connectons Full scale to any CT rato 0.00 VA per phase maxmum at A 0.% of nomnal ma ma 0. nches (. mm) 0.-nch male tab 0 Vac 0 Vac Full scale to any PT rato element wye,. element wye, element delta, four-wre delta systems megohm/phase 0. VA/phase maxmum at 00V; 0.0 VA at 0 Volts -pn 0.00-nch pluggable termnal block, AWG # (0.. mm ) Isolaton All nputs and outputs are galvancally solated to 00V Envronmental Ratngs Operatng temperature 0ºC to 0 C Storage temperature 0º to 0 C Operatng humdty To % RH noncondensng Faceplate ratng NEMA mountng gasket ncluded Descrpton Sensng Method Voltage, current Power Harmoncs resoluton Update Rate Watts, VAR and VA All other parameters Power Supply AC/DC voltage opton Specfcatons True rms Samplng at over 00 samples per cycle on all channels 0th order 00 msec at 0 Hz second at 0 Hz 0 Vac at 0/0 Hz or 00 0 Vdc, unversal AC/DC supply 0 Vdc 0 VA maxmum DC voltage opton Burden Standard Communcatons Format Connecton type RS- (through back plate) Com port baud rate 00,00 bauds Com port address 0 Data format -bt, no party Protocols Modbus ASCII, RTU or DNP.0 KYZ Pulse Contacts Form A On resstance, maxmum Ohms Peak swtchng voltage 0 Vdc Contnuous load current 0 ma Peak load current 0 ma (0 ms) Off-state leakage current at 0 Vdc ua Opto-solaton 0 Vac Dmensons and Shppng Weght lbs Basc unt H.00 x W.0 x L.00 nches IQ 0/0 Mounts n mm DIN and ANSI C. round cut-outs Shppng contaner dmensons Tolerance Complance IEC ANSI C.0 ANSI C. UL/cUL CE.00-nch cube ±0. nches (. mm) 0.% accuracy 0.% accuracy Burst Electrcal and electronc measurng and test equpment CZ Meets EU safety, health and envronmental requrements 0 0 CA0000E For more nformaton, vst:

40 .- Eaton Advanced Meters IQ 0/0 Seres November 0 Sheet 000 IQ 0/0 Meter Dmensons Expandable I/O Componentry IQ 0/0 Face IQ 0/0M Sde Fgure.-. IQ 0/0 Meter DmensonsFace and Sde Vews Orderng Informaton IQ 0/0T Sde Table.-. IQ 0/0 Meter Catalog Numberng System IQ 0 M A 0 0 Model Seres 0 = Power 0 = Power qualty Meter Type M = Meter (wth ntegral dsplay) T = Transducer only (no dsplay) Data Loggng A = None L = On-board data loggng Frequency = 0 Hz system = 0 Hz system Current Input = A secondary = A secondary Power Supply = 0 Vac/Vdc = Vdc I/O Slot 0 = None = Two relay outputs/ two status nputs = Four KYZ pulses/ four status nputs = Four analog outputs: 0 ma = Four analog outputs: 0 ma I/O Slot 0 = None = Two relay outputs/ two status nputs = Four KYZ pulses/ four status nputs = Four analog outputs: 0 ma = Four analog outputs: 0 ma 0 Table.-. IQ 0/0 Meter Accessores Descrpton Panel mountng adapter for retrofttng an IQ 0/0 to an IQ Analyzer/IQ DP-000/IQ Data cutout PXM 000 Gateway card kt to upgrade an IQ 0/0 to a PXM 000 Table.-. Power Xpert Meter 000 I/O Cards Descrpton IQ 0/0 I/O card relay outputs/ status nputs IQ 0/0 I/O card KYZ pulses/ status nputs IQ 0/0 I/O card analog outputs 0 ma IQ 0/0 I/O card analog outputs 0 ma Catalog Number IQ0-PMAK PXM000-GCK Catalog Number IQ0/0-IO IQ0/0-IO IQ0/0-IO IQ0/0-IO For more nformaton, vst: CA0000E

41 November 0 Sheet 00 Eaton Advanced Meters IQ 0/0/0 Seres.- IQ 0/0/0 Electronc Power Meters IQ 00 Electronc Power Meter General Descrpton The IQ 00 meter famly provdes capabltes you would not normally expect n affordable, compact meters, such as fast samplng rate and accurate meterng for a full range of power attrbutes. Provdng the frst lne of defense aganst costly power problems, Eaton s IQ 00 seres electronc power meters can perform the work of an entre wall of legacy meterng equpment utlzng today s technology. When space s at a premum, yet you need ANSI C.0 accuracy, the IQ 00 seres fts the bll. These meters are deal for electrcal equpment assembles, machne control panels, such as panelboard and swtchboard mans and feeders, low voltage metal-enclosed swtchgear feeders and motor control centers. Requrng far less space than other meters wth smlar functonalty, IQ 00 seres meters ft nto a standard ANSI or IEC cutout on a panelboard or other electrcal equpment, and therefore ft easly nto retroft applcatons. Applcaton Descrpton Utlty and commercal meterng Substatons, ndustral facltes, power generaton stes and campuses Submeterng Load studes and voltage recordng Analog meter replacement Features and Benefts Measure and dsplay real-tme nformaton about crtcal power parameters wth a samplng rate of 00 samples per cycle Addtonal Features Montor power utlzaton and qualty wth ANSI C.0 accuracy (0.%) Verfy meter accuracy wth KYZ test pulse self-certfcaton capabltes Optonal Modbus RTU or TCP communcatons Avalable as transducer only or wth dsplay Desgned to accommodate upgrades Integrate nto Eaton s Power Xpert Archtecture for a holstc system-level vew Table.-. Features of IQ 00 Electronc Power Meters Features IQ 0 IQ 0 IQ 0 Instrumentaton Current, per phase Current demand Calculated neutral current Voltage, per phase (L-L, L-N) Mn./max. readngs, I, V Mn./max. readngs, I, V, PF, F, W, VAR, VA Frequency Power Real, reactve and apparent power, total (W, VAR, VA) Power factor, total Real, reactve and apparent power demand Demand Methods Block nterval (sldng, fxed) Energy Real, reactve and apparent energy, total (Wh, VAR, VAh) Communcatons RS-, Modbus RTU, Modbus ASCII, KYZ output Optonal Optonal Optonal RJ, Modbus TCP, KYZ output Optonal Optonal Optonal 0 0 CA0000E For more nformaton, vst:

42 .- Eaton Advanced Meters IQ 0/0/0 Seres November 0 Sheet Techncal Data and Specfcatons Table.-. IQ 00 Electronc Power Meter Techncal Informaton Descrpton Specfcatons Current Inputs Class 0 A nomnal, 0A maxmum Class A nomnal, A maxmum Fault Current Wthstand 00A for: 00A for: 00A for: Contnuous current wthstand Programmable current Burden Pckup current Class 0 Class Connectons Pass-through wre gauge dmenson Quck connect Voltage Inputs Range Lne-to-neutral Lne-to-lne Programmable voltage range Supported systems Input mpedance Burden Connecton 0 seconds seconds second 0A for screw termnated or pass-through connectons Full scale to any CT rato 0.00 VA per phase maxmum at A 0.% of nomnal ma ma 0. nches (. mm) 0.-nch male tab 0 Vac 0 Vac Full scale to any PT rato element wye,. element wye, element delta, four-wre delta systems megohm/phase 0. VA/phase maxmum at 00V; 0.0 VA at 0V -pn 0.00-nch pluggable termnal block, AWG # (0.. mm ) Isolaton All nputs and outputs are galvancally solated to 00V Envronmental Ratngs Operatng temperature 0º to 0 C Storage temperature 0º to C Operatng humdty To % RH noncondensng Faceplate ratng NEMA water-resstant mountng gasket Included Descrpton Sensng Method Voltage, current Power Update Rate Watts, VAR and VA All other parameters Power Supply AC/DC voltage opton DC voltage opton Burden Optonal Communcatons Format Connecton type Specfcatons True rms Samplng at over 00 samples per cycle on all channels 00 msec at 0 Hz second at 0 Hz 0 Vac at 0/0 Hz or 00 0 Vdc, unversal AC/DC supply 0 Vdc 0 VA maxmum RS- or RJ (through back plate) 00,00 bauds Com. port baud rate Com. port address 0 Data format -bt, no party Protocols Modbus ASCII/RTU or TCP Optonal KYZ Pulse Contacts Form A On resstance, maxmum Ohms Peak swtchng voltage 0 Vdc Contnuous load current 0 ma Peak load current 0 ma (0 ms) Off-state leakage current at 0 Vdc ua Opto-solaton 0 Vac Dmensons and Shppng Weght lbs Basc unt H.00 x W.0 x L.00 nches IQ 00 Mounts n mm DIN and ANSI C. round cut-outs Shppng contaner dmensons Tolerance Complance IEC ANSI C.0 ANSI C. UL/cUL/CE.00-nch cube ±0.0 nches (. mm) 0.% accuracy 0.% accuracy Burst Electrcal and electronc measurng and test equpment CZ For more nformaton, vst: CA0000E

43 November 0 Sheet 00 IQ 00 Meter Dmensons Eaton Advanced Meters IQ 0/0/0 Seres IQ 00T Transducer Only.- IQ 00M Front Vew IQ 00M Sde Vew Fgure.-. IQ 00 Meter DmensonsFront and Sde Vews Orderng Informaton IQ 00T Sde Vew Table.-. IQ 00 Meter Catalog Numberng System IQ 0 M A Model Seres 0 = Volts/amps 0 = Power 0 = Energy Meter Type M = Meter (wth ntegral dsplay) T = Transducer only (no dsplay) Frequency = 0 Hz system = 0 Hz system Current Input = A secondary = A secondary Power Supply = 0 Vac/Vdc = Vac Communcaton 0 = None = Modbus RTU and KYZ pulse = Modbus TCP and KYZ pulse 0 Table.-. IQ 00 Meter Accessores Descrpton Panel mountng adapter for retrofttng an IQ 00 to an IQ Analyzer/IQ DP-000/IQ Data cutout Catalog Number IQ0-PMAK 0 CA0000E For more nformaton, vst:

44 .- November 0 Sheet Ths page ntentonally left blank. For more nformaton, vst: CA0000E

45 November 0 Sheet 00 Eaton Submeter Overvew IQ M.- IQ M IQ M General Descrpton The Eaton IQ M Meter s a DIN ral meter that combnes exceptonal performance and easy nstallaton to delver a cost-effectve soluton for energy and power montorng applcatons, as well as submeterng applcatons. All models nclude pulse output and phase alarms for true versatlty n all stuatons. The Modbus output optons offer added flexblty for confguraton and data analyss. The IQ M allows you to: Verfy energy blls Make nformed load shftng and sheddng decsons Farly and accurately allocate energy costs to users Identfy wasteful practces Decrease unnecessary usage Produce an energy profle Secure the optmum utlty rate structure Applcaton Descrpton Commercal submeterng Energy management Industral montorng Cost allocaton IQ M mounted and wred n Eaton panelboard. Closeup photo showng IQ M panelboard ntegraton and deadfront cover. Note: Please refer to Tab for panelboard nformaton. Features and Benefts DIN ral or surface mounted watthour meter wth demand Affordable, lghtweght and compact meter provdng watthours energy nformaton Included backlt LCD dsplay for local readng Power and energy readngs kw kwh Peak demand avalable Montors Watts, watthours, watt demand Volts, amperes PF, frequency VARs, VA Optonal data loggng capablty Optonal seral communcatons (Modbus-RTU or BACnet MS/TP) Revenue grade, ANSI C.0 0.% accuracy, IEC 0- Class 0.S User-enabled password protecton On-board dagnostcs IQ M n optonal NEMA X enclosure. Enclosure shpped loose for feld mountng of meter. Enclosure only model number: IQM-ENC. 0 0 CA0000E For more nformaton, vst:

46 .- Eaton Submeter Overvew IQ M November 0 Sheet 00 0 Product Selecton Table.-. Catalog Number Selecton Meter Seres Accessores IQM A Enclosure Type = Standard energy = Four quadrant energy Output Opton = Pulse output only = Pulse output Modbus = Pulse output Modbus data loggng = Pulse nputs BACnet data loggng NEMA enclosure Fuse kts DIN ral Replacement mountng clps CTs sold and splt core Techncal Data and Specfcatons Voltage nput UL: 0V (L-N) to 00V (L-L) CE: 0V (L-N) to 00V (L-L) Current nput Scalng:,A Input range: 0 0.V or 0 V (selectable) Control power UL: 0V (L-N) to 00V (L-L) CE: 0V (L-N) to 00V (L-L) Accuracy Real power and energy 0.% (ANSI C.0, IEC 0- Class 0.S) Outputs IQMAx thru : Real energy pulse: NO statc; alarm contacts: NC statc IQMA Reactve energy pulse 0 Vac/dc IQMAx, IQMAx RS- two-wre Modbus RTU IQMA RS- two-wre BACnet MS/TP Inputs IQMA Two pulse accumulators Mechancal Mountng DIN ral or -pont screwmount Envronmental Operatng temperature range Meter: 0 to 0 C ( to F) Dsplay: 0 to 0 C ( to F) Storage temperature range Meter: 0 to C ( 0 to F) Dsplay: 0 to 0 C ( to 0 F) Humdty range <% RH noncondensng Data Outputs kw, kwh: Total Current: Three-phase average and per phase Voltage: Three-phase average, per phase, and lne-lne and lne-neutral Power: Real, reactve and apparent; Three-phase total and per phase Power factor: Three-phase average and per phase Frequency Power demand: most recent and peak Demand confguraton: fxed, rollng block and external sync Data loggng (IQMAx) 0 confgurable data buffers; confgurable demand subnterval (when set at a -mnute nterval, buffers store data for 0 days) Data loggng (IQMA) confgurable data buffers; confgurable demand subnterval (when set at a -mnute nterval, buffers store data for 0 days) Trendng requres communcaton network to retreve data 0 For more nformaton, vst: CA0000E

47 November 0 Sheet 00 Eaton Submeter Overvew IQ M.- Fgure.-. IQ M Product Dagram 0 0 Fgure.-. IQ M Advanced CommuncatonModbus RTU CA0000E For more nformaton, vst:

48 .- Eaton Submeter Overvew IQ M November 0 Sheet 00 Fgure.-. IQ M Advanced CommuncatonBACnet 0 Fgure.-. IQ M Mechancal Installaton 0 For more nformaton, vst: CA0000E

49 November 0 Sheet 00 Dmensons Fgure.-. Dmensonal Drawng Fgure.-. DIN Ral Confguraton Eaton Submeter Overvew IQ M Fgure.-. Wall Mount Confguraton CA0000E For more nformaton, vst:

50 .- Eaton Submeter Overvew IQ M November 0 Sheet IQ M Current Transducers Low Current Ranges 00A General Descrpton Sold- and splt-core AC current transducers have dfferent hole szes and current ratngs to sut any applcaton. The sold-core models are deal for new constructon projects. Splt-core models are perfect for retrofts. Output s fxed at the ndustry standard of 0 0. Vac. Applcaton Descrpton Data loggng Recordng Power montorng Energy management Alternatve energy montorng Cost allocaton Features Hgh accuracy: ±% at 0% to 0% of rated current 0 0. Vac standard output Sold-core models have a rugged epoxy encapsulated constructon, gvng t outstandng durablty Splt-core models have nterleavng jonts for relablty wth a selflockng mechansm and no exposed metal; a safe desgn Standards and Certfcatons UR CE RoHS Techncal Data and Specfcatons Inputs Frequency range: 0 00 Hz Accuracy: ±% at 0% to 0% of rated current Outputs At rated current: 0. Vac Envronmental Operatng temperature range: 0 to C ( to F) Storage temperature range: 0 to 0 C ( 0 to F) Lead Length -foot twsted par Fgure.-. IQ M-SO Sold Core CT Dmensons Fgure.-. IQ M-SO Splt-Core CT Dmensons Table.-. IQ MDmensons n Inches (mm) Descrpton A B C D E Model Number Sold Core IQ M CT, A:0. Vac, 0.0 nch 0.0 (.0).0 (.0) 0. (.0) IQM-SO-0- IQ M CT, 0A:0. Vac, 0.0 nch IQ M CT, 0A:0. Vac, 0.0 nch IQ M CT, 0A:0. Vac, 0. nch IQ M CT, 00A:0. Vac,. nch IQ M CT, 00A:0. Vac,. nch IQ M CT, 0A:0. Vac,. nch IQ M CT, 00A:0. Vac,. nch IQ M CT, 00A:0. Vac,. Inch Splt Core IQ M CT, A:0. Vac, 0. nch IQ M CT, 0A:0. Vac, 0. nch IQ M CT, 0A:0. Vac, 0. nch IQ M CT, 00A:0. Vac, 0. nch IQ M CT, 00A:0. Vac, 0. nch IQ M CT, 0A:0. Vac,. nch IQ M CT, 00A:0. Vac,. nch IQ M CT, 00A:0. Vac,. nch IQ M CT, 00A:0. Vac,. nch 0.0 (.0) 0.0 (.0) 0. (.0). (.0). (.0). (.0). (.0). (.0).00 (.0).00 (.0).00 (.0).00 (.0).00 (.0). (.0). (.0). (.0). (.0).0 (.0).0 (.0).0 (.0).0 (.0).0 (.0).0 (.0).0 (.0).0 (.0).0 (.0).0 (.0).0 (.0).0 (.0).0 (.0). (.0). (.0). (.0). (.0) 0. (.0) 0. (.0) 0. (.0) 0.0 (.0) 0.0 (.0) 0.0 (.0) 0.0 (.0) 0.0 (.0) 0. (.0) 0. (.0) 0. (.0) 0. (.0) 0. (.0).00 (.0).00 (.0).00 (.0).00 (.0) IQM-SO-00-0 IQM-SO-00-0 IQM-SO-0-0 IQM-SO--00 IQM-SO--00 IQM-SO--0 IQM-SO--00 IQM-SO (0.0) 0. (0.0) 0. (0.0) 0. (0.0) 0. (0.0). (.0). (.0). (.0). (.0) 0. (0.0) 0. (0.0) 0. (0.0) 0. (0.0) 0. (0.0). (.0). (.0). (.0). (.0) IQM-SP-0- IQM-SP-0-0 IQM-SP-0-0 IQM-SP-0-00 IQM-SP-0-00 IQM-SP--0 IQM-SP--00 IQM-SP--00 IQM-SP--00 For more nformaton, vst: CA0000E

51 November 0 Sheet 00 IQ M Current Transducers Hgh Current Ranges 00 00A General Descrpton The IQ M splt-core current transducers, hgh current ranges, provde a safe 0 0. Vac output for use wth the IQ M energy meter. Applcaton Descrpton Data loggng Recordng Power montorng Energy management Alternatve energy montorng Cost allocaton Features Hgh accuracy: % of readng from 0% to 00% of rated current 0 0.V output Standards and Certfcatons UR CE Eaton Submeter Overvew IQ M Techncal Data and Specfcatons Inputs Frequency range: 0/0 Hz Accuracy: % of readng from 0% to 00% of the rated current of the CTs Outputs At rated current: 0. Mechancal Installaton category: Cat II or Cat III Envronmental Operatng temperature range: to 0 C ( to 0 F) Storage temperature range: 0 to 0 C ( 0 to F) Humdty range: 0 % noncondensng Lead Length -foot twsted par Fgure.-0. IQ M-SP-X Table.-. IQ MDmensons n Inches (mm) Descrpton A B C D E F Model Number Splt Core IQ M CT, 00A:0. Vac,.0 nch.0 (.0).0 (.0).0 (.0).0 (0.0).0 (.0).0 (.0) IQM-SP--00 IQ M CT, 000A:0. Vac,.0 nch IQ M CT, 00A:0. Vac,.0 nch IQ M CT, 00A:0. Vac,.0 nch IQ M CT, 000A:0. Vac,.0 nch IQ M CT, 00A:0. Vac,.0 nch.0 (.0).0 (.0).0 (.0).0 (.0).0 (.0).0 (.0).0 (.0).0 (.0).0 (.0).0 (.0).0 (.0).0 (.0).0 (.0).0 (.0).0 (.0).0 (0.0).0 (0.0).0 (0.0).0 (0.0).0 (0.0).0 (0.0).0 (0.0).0 (0.0).0 (0.0).0 (0.0).00 (.0).00 (.0).00 (.0).00 (.0).00 (.0) IQM-SP--000 IQM-SP--00 IQM-SP--00 IQM-SP--000 IQM-SP CA0000E For more nformaton, vst:

52 .- Eaton Submeter Overvew IQ M November 0 Sheet 00 Supported System Types The IQ M power meters have a number of dfferent possble system wrng confguratons (see wrng dagrams on Page.-). To confgure the meter, set the System Type va the User Interface or Modbus regster 0 (f so equpped). The System Type tells the meter whch of ts current and Table.-. Wrng Symbol voltage nputs are vald, whch are to be gnored, and whether neutral s connected. Settng the correct System Type prevents unwanted energy accumulaton on unused nputs, selects the formula to calculate the Theoretcal Maxmum System Power, and determnes whch phase loss algorthm s to be used. The phase loss algorthm s confgured as a percent of the Lne-to-Lne System Voltage (except when n System Type 0) and also calculates the expected Lne to Neutral voltages for system types that have Neutral ( and 0). Table.-. Supported System Types Number CTs Voltage Connectons System Type Phase Loss Measurements Wrng of Wres Qty ID Qty ID Type Modbus User Interface: VLL VLN Balance Dagram Regster 0 SETUP>S SYS Fgure Number Sngle-Phase Wrng A A A, B A, N A, B A, B, N L-N L-L L-L wth N 0 L n L L n AN, BN AN-BN Three-Phase Wrng A, B, C A, B, C Delta L AB, BC, CA AB-BC-CA.- A, B, C A, B, C, N Grounded wye Descrpton Voltage dsconnect swtch AB AB 0 L n AB, BC, CA AN, BN, CN AN-BN-CN and AB-BC-CA AN S S Fuse (nstaller s responsble for ensurng complance wth local requrements. No fuses are ncluded wth the devce.) Earth ground Current transducer Potental transformer Protecton contanng a voltage dsconnect swtch wth a fuse or dsconnect crcut breaker. The protecton devce must be rated for the avalable short-crcut current at the connecton pont. Note: IQ MAx models are not polarty senstve. No need to observe polarty when wrng. IQ MAx models are polarty senstve. Observe correct polarty when wrng. 0 For more nformaton, vst: CA0000E

53 November 0 Sheet 00 Wrng Dagrams Eaton Submeter Overvew IQ M.- Use System Type 0 (L ln) N L Use System Type (L) L L L X X Whte Black A B C N A B C X X X X X X Whte Black Whte Black Whte Black A B C N A B C Fgure.-. Sngle-Phase Lne-to-Neutral Two-Wre System, CT Fgure.-. Three-Phase, Three-Wre, CTs, No PT Use System Type (L) L L Use System Type 0 (L ln) N L L L A B C N A B C N 0 X X Whte Black A B C Fgure.-. Sngle-Phase Lne-to-Lne Two-Wre System, CT X X X X X X Whte Black Whte Black Whte Black A B C Fgure.-. Three-Phase, Four-Wre Wye Drect Voltage Connecton, CTs Use System Type (L ln) N L L N L L L X X X X Whte Black Whte Black A B C N A B C X X X X X X Whte Black Whte Black Whte Black A B C N A B C 0 Fgure.-. Sngle-Phase Drect Voltage Connecton, CTs Fgure.-. Three-Phase, Four-Wre Wye Connecton, CTs, PTs CA0000E For more nformaton, vst:

54 .-0 Eaton Submeter Overvew IQ M November 0 Sheet 00 Control Power L L L G N L L L G 0 Fgure.-. Drect Connect Control Power (Lne-to-Lne) Lne-to-Lne from 0 Vac to 00 Vac (UL) (0 Vac CE). In UL nstallatons, the lnes may be floatng (.e., a delta). If any lnes are ted to an earth (.e., a corner grounded delta), see the Lne-to-Neutral nstallaton lmts. In CE nstallatons, the lnes must be neutral (earth) referenced at less than 00 Vac L-N. N L L L Fgure.-. Drect Connect Control Power (Lne-to-Neutral) Lne-to-Neutral from 0 Vac to Vac (UL) or 00 Vac (CE). G Fgure.-0. Control Power Transformer (CPT) Connecton The Control Power Transformer may be wred L-N or L-L. Output to meet meter nput requrements Fuse Recommendatons Keep the fuses close to the power source (obey local and natonal code requrements). For selectng fuses and crcut breakers, use the followng crtera: Current nterrupt capacty should be selected based on the nstallaton category and the fault current capablty Overcurrent protecton should be selected wth a tme delay The voltage ratng should be suffcent for the nput voltage appled Provde overcurrent protecton and dsconnectng means to protect the wrng. For DC nstallatons, the nstaller must provde external crcut protecton (suggested: 0.A, tme delay fuses) The earth connecton s requred for electromagnetc compatblty (EMC) and s not a protectve earth ground G Fgure.-. Drect Connect Control Power (DC) DC control power from Vdc to 00 Vdc (UL and CE max.). 0 For more nformaton, vst: CA0000E

55 November 0 Sheet 00 Eaton Submeter Overvew IQ 0S/0S Seres.- IQ 0S/0S Self-Enclosed Electronc Meters IQ 0S/0S Self-Enclosed Electronc Meter General Descrpton Wth energy costs skyrocketng, you need the ablty to verfy the accuracy of utlty bllng and allocaton of energy costs among busness unts, dfferent manufacturng areas or facltes, and tenants. Producton equpment and IT systems are vulnerable to power anomales; therefore, you must ensure that power s always up to specfcatons. If your nfrastructure s an establshed faclty, you may not currently have meterng or may have addressed these concerns by deployng a varety of analog gauges and metersone for volts, one for amperes and so on, wth separate meters for each measurement. If you re plannng an upgrade or a new power nfrastructure, no doubt you would lke to captalze on the latest technology to mprove upon that cumbersome archtecture and ts patchwork vew. Applcaton Descrpton Industral and commercal buldngs, meterng and submeterng Government facltes and mltary Unverstes and arports Load studes and voltage recordng Features and Benefts Self-enclosed, these meters are an deal soluton for surface mountng next to a selected pece of equpment for energy montorng NEMA enclosure wth a large, easy-to-read faceplate, consstent wth other Eaton meter models, desgned wth knockouts for easy nstallaton Ethernet communcatons opton for ether wred or wreless setup, allowng for addtonal ease of nstallaton and ntegraton nto exstng networks Avalable data and alarm recordng for hstorcal records/trendng Integrate nto Eaton s Power Xpert Archtecture for a holstc systemlevel vew Wreless and Hgh-End Capabltes you would not Expect from a Self-Enclosed, Compact Meter Provdng the frst lne of defense aganst costly power problems, Eaton s IQ 0S/0S electronc selfenclosed meters can perform the work of an entre wall of legacy meterng equpment usng today s secure wreless technology. Eaton s IQ 0S/ 0S meters use -bt AD converters that sample at more than 00 samples per cycle and meet IEC (0.% accuracy) and ANSI C.0 (0.% accuracy) standards. Wth such hghperformance measurement capablty, these meters can be confdently used for prmary revenue meterng and submeterng applcatons. Ether model wll help you montor energy demand, whle the IQ 0S provdes the extra beneft of also montorng and recordng the changes n the characterstcs of your power. Eaton s IQ 0S/0S meters provde drect-readng metered values for the most crtcal power aspects, such as watts, watt demand, watthours, voltage amperes (VA), VA-hours, VARs, VAR-hours and power factor. They have hgh samplng speed and accuracy. These meters are self-enclosed n a NEMA enclosure wth knockouts on the bottom for communcaton and power, provdng for an easy nstallaton. Perhaps you don t have network drops n all the rght places. The IQ 0S/0S offers a wreless communcatons opton. The transmssons are encrypted usng -bt Wred Equvalent Prvacy (WEP) for securty. Industry-Standard Communcaton Protocols Standard Modbus RS- Communcaton Standard communcaton ncludes an RS- output speakng Modbus protocol. Ths allows the unt to be connected to any seral RS- bus usng the Modbus nterface. The unt communcates easly wth most buldng automaton, Power Xpert Software or other software systems. Baud rates are up to.k baud to provde fast update tmes. W-F or Land-Based Ethernet The unt offers an Ethernet opton confgured ether as an RJ or W-F connecton. The W-F confguraton allows the 0S/0S to be used on standard W-F base statons. The unt s assgned an IP address; t communcates Modbus protocol over Ethernet TCP/IP. Wreless Ethernet s relable and easy to ntegrate, makng t the superor soluton for mass meter deployment. KYZ Pulse For applcatons n whch a pulse s needed, the unt also provdes a KYZ output that pulses proportonal to the amount of energy consumed. Ths feature s used for pulse countng applcatons nto buldng management systems where seral or Ethernet protocol s not avalable. Verfy Energy Blls The IQ 0S/0S models provde a traceable watthour test pulse (used wth a watthour pulse recorder or totalzer), so you can verfy the accuracy of your meter and n turn, the accuracy of bllng from your utlty company and to nternal customers. 0 0 CA0000E For more nformaton, vst:

56 .- Eaton Submeter Overvew IQ 0S/0S Seres November 0 Sheet Integrated wth Eaton s Power Xpert Archtecture IQ 0S/0S meters ntegrate nto Eaton s Power Xpert Archtecture, where meters, gateways and montorng devces collaborate to create a unfed, centralzed vew of the end-to-end power and faclty nfrastructure. When used n ths archtecture, ether wth a Power Xpert Gateway or drectly va Ethernet, the meters wth the Modbus RTU opton can provde Web-based graphcs of current power condtons. Smply connect your meter to a Power Xpert Gateway to translate Modbus-based nformaton from the meter nto HTML-based Web pages that are accessble from any standard Web browser. If you select a model wth the Ethernet opton, the meter can easly be montored remotely va Power Xpert Software or another thrd-party montorng system. Wth access to accurate, real-tme nformaton from IQ 0S/0S meters, Power Xpert Archtecture can transform your power system nto an ntegrated, agle system, and an easly managed entty that performs better and costs less. Desgned for the User When space s at a premum, yet you need ANSI C.0 accuracy, Eaton IQ 0S/0S meters ft the bll. These ultra-compact meters are deal for surface mountng next to a selected pece of equpment for energy montorng. Requrng far less space than other meters wth smlar functonalty, and offerng a NEMA enclosure and a large, easy-to-read faceplate, consstent wth other Eaton meter models, these meters are desgned wth knockouts for easy retroft nstallaton. Most meters n ths class have small or dark dsplays that can be hard to see, especally from a dstance. Eaton s IQ 0S/0S meters have a large, brght red, three-lne LED dsplay, each lne more than a half-nch tall. Ths dsplay s very easy to read, even f the meter s nstalled at a heght or dstance. Usng the keypad and menus on the local dsplay, users can dsplay a varety of electrcal system values or program the meter. Table.-. Features of IQ 0S/0S Electronc Power Meters Features IQ 0S IQ 0S Instrumentaton Current, per phase Calculated neutral current Voltage, per phase (L-L, L-N) Frequency Mnmum/maxmum readngs, I, V, PF, F, W, VAR, VA Total Total and per phase Power Real, reactve and apparent power (W, VAR, VA) Total Total and per phase Power factor Average Average and per phase Demand Methods Block nterval (fxed, sldng) Current demand Real, reactve and apparent power demand Total Total and per phase Energy Real, reactve and apparent energy (Wh, VARh, VAh) Total Total and per phase Real and reactve, net and postve and negatve (Wh, VARh) Total Total and per phase I/O Pulse output Communcatons RS-, Modbus RTU, DNP.0 RJ or 0.b, Modbus TCP Optonal Optonal Data Loggng MB for data loggng Alarmng Set pont drven alarm Per phase only. If confgured for Ethernet, RS- not avalable. For more nformaton, vst: CA0000E

57 November 0 Sheet 00 Eaton Submeter Overvew IQ 0S/0S Seres.- Techncal Data and Specfcatons Table.-. IQ 0S/0S Electronc Meter Techncal Informaton Descrpton Specfcatons Current Inputs Class 0 A nomnal, 0A maxmum Class A nomnal, A maxmum Fault Current Wthstand 0A for: 0A for: 00A for: Programmable current Burden Pckup Current Class 0 Class Connectons Screw termnal Voltage Inputs Range Lne-to-neutral Lne-to-lne Programmable voltage range Supported systems Input mpedance Burden Connecton 0 seconds seconds second Full scale to any CT rato 0.00 VA per phase maxmum at A 0.% of nomnal ma ma # screws 0 Vac (IQ0S), 0 Vac (IQ0S) 0 Vac Full scale to any PT rato element wye,. element wye, element delta, four-wre delta systems megohm/phase 0. VA/phase maxmum at 00V; 0.0 VA at 0V -pn, 0.00-nch screw termnal block, AWG # (0.. mm ) Isolaton All nputs and outputs are galvancally solated to 00V Envronmental Ratngs Operatng temperature 0º to 0 C Storage temperature 0º to 0 C Operatng humdty To % RH noncondensng Faceplate ratng NEMA Sensng Method Voltage, current rms Power Samplng at over 00 samples per cycle on all channels Descrpton Update Rate Watts, VAR and VA All other parameters Power Supply AC/DC voltage opton Specfcatons 00 msec at 0 Hz second at 0 Hz 0 00 Vac at 0/0 Hz or 00 0 Vdc, unversal AC/DC supply VA maxmum Burden Standard Seral Communcatons Format Connecton type RS- Communcatons port baud rate 00,00 Bauds Communcatons port address 0 Data format -bt, no party Protocols Modbus ASCII, RTU, DNP.0 Optonal Ethernet Communcatons Format Connecton type RJ or 0.b (wreless) Protocols Modbus TCP KYZ Pulse Contacts Form A On resstance, maxmum Ohms Peak swtchng voltage 0 Vdc Contnuous load current 0 ma Peak load current 0 ma (0 ms) Off-state leakage current at 0 Vdc ua Opto-solaton 0 Vac Dmensons and Shppng Weght lbs Basc unt H.0 x W.0 x D.0 nches Complance IEC 0.% accuracy ANSI C.0 0.% accuracy ANSI C. Burst ANSI (IEEE) C.0. Surge wthstand UL/cUL Electrcal and electronc measurng and test equpment CZ Note: Specfcatons are subject to change wthout notce and represent the maxmum capabltes of the product wth all optons nstalled. Ths s not a complete feature lst. Features and functonalty may vary dependng on selected optons, frmware verson and product model. Please refer to User Manual for detaled specfcatons. 0 0 CA0000E For more nformaton, vst:

58 .- Eaton Submeter Overvew IQ 0S/0S Seres November 0 Sheet 00 Wrng Dagram 0 Three-Phase Four-Wre WYE Drect Three-Phase Three-Wre DELTA Drect Fgure.-. IQ 0S/0S Wrng Dagram Installaton Dagram Three-Phase Four-Wre WYE wth PTS Three-Phase Three-Wre DELTA Drect Dmensons n Inches (mm).0 (.0). (.) Closed O.0 (.) Mountng Plate.0 (00.).0 (00.) 0 Lockable Revenue Seal 0.0 (.). (.) Antenna Length:.0 (.). (.0) Fgure.-. IQ 0S/0S Installaton Fgure.-. IQ 0S/0S Meter Dmensons For more nformaton, vst: CA0000E

59 November 0 Sheet 00 Eaton Submeter Overvew IQ 0S/0S Seres.- Orderng Informaton Table.-. IQ 0S/0S Meter Catalog Numberng System IQ 0 S A Model Seres 0 = Energy Meter Type 0 = Energy plus S = Self-enclosed meter Frequency = 0 Hz system = 0 Hz system Current Input = A secondary = A secondary Power Supply = 0 00 Vac/dc Communcaton = Modbus RTU (RS-) = Modbus RTU (RS-) or TCP(RJ) or 0.b (W-F) 0 0 CA0000E For more nformaton, vst:

60 .- Eaton Submeter Overvew Power Xpert Mult-Pont Meter November 0 Sheet Power Xpert Mult-Pont Meter Hgh-Densty Meterng Power Xpert Mult-Pont Meter Eaton s Power Xpert Mult-Pont Meter s an ANSI C.0 revenue class Web enabled electronc submeterng devce that can be mounted n panelboards, swtchboards or enclosures. When mounted n a panelboard or a swtchboard, the Power Xpert Mult- Pont Meter provdes customers wth an ntegrated power dstrbuton and energy meterng soluton that saves space, reduces nstallaton labor and lowers total cost. The Eaton Power Xpert Mult-Pont Meter (PXMP Meter) offers a hghly modular approach to hgh-densty meterng applcatons n electrcal power dstrbuton systems. The PXMP Meter s compatble wth most threephase ndustral, commercal and sngle-phase resdental low voltage electrcal power systems. The PXMP s equpped wth two Modbus RTU communcaton ports for local dsplay and remote seral communcatons. The PXMP also has optonal pulse nput and dgtal output modules along wth one standard dgtal output and three dgtal nputs. The PXMP Energy Portal Module s Web enabled, makng t sutable for use wth Ethernet networks and modems. General Descrpton The Power Xpert Mult-Pont Meter can measure up to any of the followng number of crcuts: Sxty sngle-phase, two-wre (sngle-pole) Thrty sngle-phase, three-wre (two-pole) Twenty three-phase, four-wre (three-pole) The crcuts lsted above can be mxed provded that the total number of current sensors does not exceed 0. The meter provdes current; voltage; power factor; demand and actve, reactve, and real power (VA, VAR, kw); and actve, reactve and real energy (VA, VAR, kwh) measurements for each load. The unt also provdes up to two years at -mnute ntervals or eght years at one-hour ntervals of demand data loggng storage n nonvolatle memory for up to 0 submeters. The Power Xpert Mult-Pont Meter can be used wth three dfferent ratngs of current sensors: 00 ma, 0 ma or mv. Swtchboard/ panelboard applcatons wll use the 00 ma current sensors, whch are hghly accurate, self-protectng n the event of an open crcut condton under load and are suppled wth an ntegral plugn connector. The PXMP automatcally detects the ratng of the current sensor that s connected. The PXMP can also use 0 ma current sensors that were prevously nstalled for IQMESII retroft applcatons. Addtonally the PXMP can use mv splt core current sensors for retroft applcatons where meterng has not prevously exsted. The 0 ma and mv current sensors are also self-protectng n the event of an open crcut condton under load. Applcaton Descrpton The Power Xpert Mult-Pont Meter s deally suted to handle submeterng n low voltage power dstrbuton equpment applcatons such as dstrbuton boards n mult-tenant buldngs, comprehensve man and feeder meterng n commercal/ndustral swtchboards or medum voltage dstrbuton equpment wth the use of voltage and current transformers. The Power Xpert Mult-Pont Meter provdes a cost-effectve soluton for resdental or commercal meterng nstallatons. Typcal nstallatons nclude: Hgh-rse buldngs Government nsttutons K, unverstes and campuses Offce buldngs Medcal facltes Apartment and condomnum complexes Arports Shoppng malls Industral stes Mxed-use facltes Features Montors power and energy for up to 0 current sensors; spacesavng modular desgn allows measurement from to 0 crcuts Bult-n communcaton nterfaces Montors sngle-phase and threephase loads from 0 to 00 Vac Montors current, voltage, power factor, frequency, power and energy Stores extensve energy profle data for each meterng pont; can be used to dentfy concdental peak demand contrbuton LEDs provde status of unt communcaton actvty and verfy sensor connectons Meets rgd ANSI C.0 accuracy specfcatons for revenue meters Three standard dgtal nputs and eght pulse nputs per optonal module to montor WAGES (water, ar, gas, electrc or steam) One standard dgtal output and eght dgtal outputs per optonal module for alarm ndcaton Three types of meter modules to support 0 ma, 00 ma or mv sensors Can be drectly mounted n a UL Lsted panelboard, swtchboard or enclosure MB of memory n meter base for up to two years of -mnute nterval data (eght years of onehour nterval data) for eght demand values up to 0 submeters Communcaton Capabltes Wth the Power Xpert Mult-Pont Meter s bult-n communcaton capabltes, remote meter readng and montorng functons can be ntegrated nto both new and retroft applcatons. Standard Modbus RTU Optonal Modbus TCP / BACnet/IP / SNMP / HTTP / SMTP / NTP / SFTP communcatons Software Compatblty The Power Xpert Mult-Pont Meter: Can be used as part of an electrcal energy montorng and cost allocaton system Can be remotely montored va onboard Web pages wth Eaton s optonal Energy Portal Module Is compatble wth thrd-party software platforms and nterface devces For more nformaton, vst: CA0000E

61 November 0 Sheet 00 Eaton Submeter Overvew Power Xpert Mult-Pont Meter.- Confguraton The Power Xpert Mult-Pont Meter s fully confgurable usng Power Xpert Mult-Pont confguraton software that can be downloaded free from the Eaton webste at Each Power Xpert Mult-Pont Meter module can be confgured for up to sx meterng ponts n any combnaton of sngle-phase and three-phase meterng ponts correspondng to the voltage wrng of the meter base Power Xpert Mult-Pont confguraton software smplfes system commssonng and startup; PXMP confguraton software supports both onlne and offlne confguratons Easy to Install UL Lsted for mountng nsde panelboards (e.g., PRL), swtchboards, and NEMA enclosures Quck connect termnals for current sensors, Modbus communcatons, and bus voltages make wrng the unt quck and easy Table.-. Power Xpert Mult-Pont Meter Features Descrpton Man/Aggregate Channel Data Tenant Instrumentaton Current, per phase Voltage, per phase (L-L, L-N) Frequency Mnmum/maxmum readngs, V Per phase Mnmum/maxmum readngs, W, VAR, VA Total and per phase Mnmum/maxmum readngs, PF, F Total Power Real, reactve and apparent power (W, VAR, VA) Total and per phase Total and per phase Total Power factor Average Average Demand Block nterval (fxed, sldng) Real, reactve and apparent power demand Total and per phase Mnmum/maxmum readngs, PF, W, VAR, VA Total and per phase Total Energy Real, reactve and apparent energy (Wh, VARh, VAh) Total Total Real, forward and reverse, and total (Wh) Man only. Product Selecton Table.-0. Meter Selecton Meter Module Meter Base Typcal Applcatons Three-Phase Applcaton or Sngle-Phase wth ABCN Sngle-Phase Applcaton wth ABN New Swtchboards PXMP Current Sensors, Sold Core, PXMP-CSXXX, Ampere Ratngs Retroft Exstng IQMESII Sensors, Sold Core, CS-XXX, Ampere Ratngs Enclosed PXMP MV Sensors, Splt Core, CS-SP-X-XXXX-MV, Ampere Ratngs Enclosed PXMP Interface Modules PXMP-MM00MA PXMP-MB, 0, 00 PXMP-MMMV PXMP-MB 00, 00, 00, 00, 00, PXMP-IMMV 00, 000, 00, 00, 000 PXMP-MM0MA PXMP-MB, 0, 0,, 00, 00 PXMP-MM00MA-AB PXMP-MB-AB, 0, 00 PXMP-MMMV-AB PXMP-MB-AB 00, 00, 00, 00, 00, PXMP-IMMV 00, 000, 00, 00, 000 PXMP-MM0MA-AB PXMP-MB-AB, 0, 0,, 00, 00 For applcatons requrng more than 000A current sensors, use a CS00 wth A CT n conjuncton wth PXMP-MM0MA. 0 0 CA0000E For more nformaton, vst:

62 .- Eaton Submeter Overvew Power Xpert Mult-Pont Meter November 0 Sheet Techncal Data and Specfcatons Envronmental The PXMP Meter and current sensors must be housed n a NEMA or UL enclosure that keeps the nternal envronment wthn the PXMP s envronmental specfcaton ranges and provdes sutable fre and mechancal protecton n the end product nstallaton. Temperature range: 0 to 0 C ( to F) Storage temperature range: 0 to C Humdty: % noncondensng envronment Polluton degree: II Elevaton: 0 to ft (0 to 000m) Housng: IP0 CE Mark EMC EN Emssons Conducted and Radated FCC part class B CISPR class B Table.-. Electromagnetc Immunty Standard Descrpton Level EN000-- ESD EN000-- RF radated EN000-- Electrcal fast transent EN000-- Surge EN000-- RF conducted EN000-- Volt sag/swell/ varaton Vdc PXMP nputs are for a local bus that s surge level. PXG0E AC mans connecton wll support level. Product Safety IEC/EN00- UL 00- Fle E CNL evaluaton to CAN/C. No 00.. Accuracy ANSI C.0Accuracy Class 0.% wth ether CSXXX or PXMP-CSXXX sensors Measurement Canada Approval Pendng External Crcut Group Specfcatons PXMP-MB (-AB) Meter Base Dscrete Output Quantty sold-state relay Form A NO Bdrectonal FET Polarty of external source s not mportant Isolaton crcut to ground kv/ mn. Maxmum external source voltage Vdc Lne-to-lne TVS clamp across swtchng element at Vdc Sold-state relay on resstance ohms maxmum Maxmum load current 0 ma Mnmum pulse wdth 0 mllseconds Fxed mllseconds for pulse ntator functon Maxmum pulse rate Hz Wrng to two-poston removable termnal plug AWG (. 0. mm ), wre ferrules recommended T (polarty not mportant) T (polarty not mportant) Dscrete Inputs Quantty, common crcuts nputs Group solaton kv No nput-to-nput crcut solaton All nputs per module share a common external V (±0%) supply V externally sourced between common and nputs Desgn to nterface wth external dry contact Input mpedance ~.K ohms Input current draw ~0 ma per nput Mnmum pulse wdth 0 mllseconds Maxmum pulse rate 0 Hz Wrng to four-poston removable termnal plug AWG (. 0. mm ), wre ferrules recommended TCommon (connect ext. common here) TInput (dry contact to V hot) TInput (dry contact to V hot) TInput (dry contact to V hot) COM and COM RS- Seral Ports No D/D basng relance on falsafe drver and basng at Master Baud rate confgurable between 00 K baud (default) Use cable desgned for RS- communcatons Low L:L capactance Impedance of ~00 0 ohms SheldMylar for hgh frequency; Brad for low frequency Separate common and sheld for best nose mmunty Maxmum cable length s 000 ft (.m) wth nodes at.k baud ncreased data rates wll reduce maxmum cable dstance 000 ft (0.m) wth total nodes at.k baud Isolaton 00V to ground due to TVS dode clamps Modbus RTU slave protocol, address defned by rotary swtch Green Rx and Red Tx LEDs per channel Data > Datadurng dle marked, logc state End of Lne Termnaton resstance should match cable mpedance (typ ohms) Four-poston removable termnal plug AWG (0. 0. mm ) typcal, wre ferrules recommended COM TSheld TRS- common TData T0Data COM TSheld TRS- common TData TData For more nformaton, vst: CA0000E

63 November 0 Sheet 00 Eaton Submeter Overvew Power Xpert Mult-Pont Meter.- PXMP-MB Power Supply Input Vdc ±0% W maxmum load kv solaton barrer nternal to PXMP-MB Externally fuse crcut to protect wre Green power OK LED Three-poston termnal block AWG (.. mm ), wre ferrules recommended T Vdc (common) T Vdc (Hot) TSheld (optonal) capactvely referenced to chasss ground for enhanced EMC performance Meter Voltage Inputs Overvoltage CAT III Maxmum voltage ratng 0VL:G (corner grounded delta) VL:N 00VL:L Frequency ratng Hz Meterng range (temporary transtons) 0 00VL:N 0 00VL:L Abuse wthstand ratng 000V sustaned Hgh pot wthstand ratng 00V/mn Input mpedance M ohms Fuse nputs rated to protect wrng to mans. External fuses must be nstalled between the meter voltage termnal and the mans dsconnect swtch to the man lnes to protect the lnes. 00V A BUSS type KTK-R- Fast Actng or equvalent fuses are recommended. Wrng to removable termnal plug 0 AWG (. 0. mm ), wre ferrules recommended TN (VR) TC (V) T0B (V) TA (V) PXMP Meter Modules (PXMP-MMs) Compatble wth all PXMP Meter Base slots 0 LED ndcators: Health and status green, blnk to show actvty Pulse energy output one red per group of three loads Load energy drecton red/green par per load All varatons support sx load nputs. Current sensor connecton s one x connector per load. Compatble wth PXMP-SCXX sensor cables, total cable length to the sensor should not exceed ft (.m). Note that -AB suffx only affects what voltage channels the loads are pared wth for meterng purposes. PXMP-MM0MA supports the CSXXX seres of 0 ma maxmum secondary output current transformers. PXMP-MM00MA supports the PXMP-CSXXX seres of 00 ma maxmum secondary output current transformers. PXMP-MMMV supports mv maxmum secondary output current transformers wth the use of the PXMP-IMMV nterface module. PXMP Dgtal Output Module (PXMP-DOM) Compatble wth all PXMP-MB slots 0 LED ndcators Health and status green, blnk to show actvty Output On/Off status one green per output Eght ndvdual sold-state relay outputs Each crcut rated for Vdc (±0%) wth an 0 ma load maxmum Vdc s externally sourced Group solaton to ground kv Each crcut has ts own separate common, crcut-to-crcut solaton 0V -poston removable termnal plug AWG (. 0. mm ), wre ferrules recommended PXMP Pulse Input Modules (PXMP-PIMs) Compatble wth all PXMP-MB slots 0 LED ndcators Health and status green, blnk to show actvty Input On/Off status one green per pulse nput Eght pulse nputs to external dry contacts Maxmum pulse rate s 0 Hz Mnmum pulse wdth s 0 mllseconds External crcut groups rated for Vdc (±0%) All crcuts share the same electrcal common External supply connects to the module wth a two-poston removable termnal plug The supply s nternally fanned out to all crcuts Group solaton lmted to 00V to ground due to TVS dode clamp Input mpedance ~.K causng a 0 ma load per nput when energzed External crcut groups connect wth a -poston removable termnal plug Termnals support AWG (. 0. mm ), wre ferrules recommended 0 0 CA0000E For more nformaton, vst:

64 .-0 Eaton Submeter Overvew Power Xpert Mult-Pont Meter November 0 Sheet 00 PXMP Energy Portal Module (PXMP-EPM) Only functonally compatble wth PXMP-MB slot 0 LED ndcators Top health and status green, blnk to show actvty Com. reset buttonreset to defaults Local IP /0 RJ front-facng Ethernet confguraton port LEDs Lnk (Tx/Rx blnk) 0/00 speed LED four-stack for bottom LAN/WAN Ethernet port Lnk (Tx/Rx blnk) 0/00 speed DHCP/Fxed TX actve Confg. Ethernet RJ Cat STP/UTP 0Base-T/00Base-Tx Auto crossover capablty supported Java Web browser nterface Table.-. Power Xpert Mult-Pont Meter SystemHardware Specfcatons Components Feld Power Rated Rated Crcut Source Voltage Current Crcut Impedance Bottom facng LAN/WAN Ethernet port RJ Cat STP/UTP 0Base-T/ 00Base-Tx STP requred for full electromagnetc mmunty Auto crossover capablty supported Supports Modbus TCP and Java Web browser nterface Bottom-facng telephone modem nterface Modem type V/K baud RJ feld nterface Isolaton Note Note 0 PXMP-MB PXMP-MB-AB Dgtal output External ±0% 0.00A maxmum ohms maxmum.0 kv Dgtal nput External ±0% 0.0A.K.0 kv Opto drops supply by V COM RS- Internal V 0 0 ohms 00V TVS dode clamped to PE COM RS- Internal V 0 0 ohms 00V TVS dode clamped to PE Power supply nput Voltage nputs A (V)/ B (V)/ C (V)/ N (VR) External ±0% 0.A maxmum External mans N/A.0 kv Installaton Class II nput 0V L:G 0. ma M ohms N/A Installaton Class III V L:N 0.0 ma M ohms N/A Installaton Class III 00V L:L 0.0 ma M ohms N/A Installaton Class III Group are electrcally common W maxmum Hgh pot 00V/ mnmum Hgh pot 00V/ mnmum Hgh pot 00V/ mnmum PXMP-MM00MA CT secondary External N/A 00 ma. ohms N/A 0% over-range See sensor for prmary solaton PXMP-MM0MA CT secondary External N/A 0 ma ohms N/A 0% over-range See sensor for prmary solaton PXMP-MMMV CT secondary External 0.V N/A 0,000 ohms N/A 0% over-range See sensor for prmary solaton PXMP-DOM Dgtal output External ±0% 0.00A maxmum 0 ohms maxmum PXMP-PIM Pulse nput External ±0% 0.0A.K ohms 00V to ground kv group 0V solaton crcut-to-crcut TVS dode clamped to PE; group solated, all crcuts common to V external source PXMP-EPM Ethernet 00 Bt Internal N/A N/A kv POT modem Internal N/A N/A DC. AC RMS. Isolaton dependent on external source Note: Opto creates.v drop sourced by.k ohms; solaton dependent on external source 0 For more nformaton, vst: CA0000E

65 November 0 Sheet 00 aton Submeter Overvew Power Xpert Mult-Pont Meter.- Catalog Informaton The Power Xpert Mult-Pont Meter, current sensors and other accessores can be ordered from Eaton dstrbutors. Refer to the followng catalog numbers when orderng. Table.-. Power Xpert Mult-Pont Meter Products Product Descrpton Catalog Number Meter Bases and Meter Modules wth ABCN Voltage Inputs PXMP meter basethree-phase wth ABCN PXMP-MB voltage nputs PXMP meter module wth sx 00 ma nputs PXMP-MM00MA for use wth PXMP current sensors PXMP meter module wth sx 0 ma nputs PXMP-MM0MA for use wth IQMESII current sensors PXMP meter module wth sx mv nputs PXMP-MMMV for use wth mv current sensors Meter Bases and Meter Modules wth ABN Voltage Inputs PXMP meter basesngle-phase, three-wre PXMP-MB-AB wth ABN voltage nputs PXMP meter module wth sx 00 ma nputs PXMP-MM00MA-AB for use wth PXMP current sensors PXMP meter module wth sx 0 ma nputs for use PXMP-MM0MA-AB wth IQMESII current sensors PXMP meter module wth sx mv nputs for PXMP-MMMV-AB use wth mv current sensors IO Modules PXMP meter pulse nput module wth eght nputs PXMP-PIM PXMP meter dgtal output module wth PXMP-DOM eght outputs Communcaton Module PXMP meter energy portal module PXMP-EPM Current Sensor Kts KIT, PXMP CS sensor, quantty of PXMP-CS- KIT, PXMP CS0 sensor, quantty of PXMP-CS0- KIT, PXMP CS00 sensor, quantty of PXMP-CS00- Current Sensor Cable Kts KIT, PXMP sensor cable, ft (.m), quantty of PXMP-SC- KIT, PXMP sensor cable, ft (.m), quantty of PXMP-SC- KIT, PXMP sensor cable, ft (.m), quantty of PXMP-SC- KIT, PXMP sensor cable, ft (.m), quantty of PXMP-SC- Current Sensor Extenson Cable Kts KIT, PXMP sensor extenson cable, ft (.m), PXMP-SCE-- quantty of KIT, PXMP sensor extenson cable, ft (.m), PXMP-SCE-- quantty of Interface Modules PXMP current sensor nterface module for mv, PXMP-IMMV- kt X Note: Total sensor lead length must not exceed ft (.m). The Pulse Input Module (PXMP-PIM) can be used to totalze pulse outputs from water meters, gas meters, steam meters, or even old electrcal meters wth KZ pulse outputs. The PXMP-PIM can also be used for status montorng n applcatons where status ndcaton updates of seconds over Modbus satsfes the applcaton requrement. Support products for the Power Xpert Mult-Pont Meter nclude the HMI dsplay, IMPCABLE and power supples as descrbed n Table.-. Table.-. Power Xpert Mult-Pont Meter Support Products Product Descrpton Communcaton cable, 000 ft (0m), 00V nsulaton PXMP meter dsplay-nch color touchscreen (wth cable) Power supplysngle-phase 0 Vac, Vdc at.a Power supplythree-phase 0 Vac, Vdc at.a Power supplythree-phase 00 Vac, Vdc Catalog Number IMPCABLE PXMP-DISP- PSG0E PSG0F PSSD 0 0 CA0000E For more nformaton, vst:

66 .- Eaton Submeter Overvew Power Xpert Mult-Pont Meter November 0 Sheet 00 Wrng Dagrams PXMB-MB Note: For all voltage connectonsfuses should be szed n accordance wth best practces to protect the nstrumentaton wre. 0 Fgure.-. Four-Wre Wye Voltage Connecton Inputs 0 Fgure.-. Three-Phase, Four-Wre Servce Current Sensor Connectons For more nformaton, vst: CA0000E

67 November 0 Sheet 00 Eaton Submeter Overvew Power Xpert Mult-Pont Meter.- Fgure.-. Three-Phase, Four-Wre Servce (Ten Sngle-Phase, Sngle-Pole) Current Sensor Connectons 0 Fgure.-. Network 0/0 Three-Wre Apartment Servce Current Sensor Connectons 0 CA0000E For more nformaton, vst:

68 .- Eaton Submeter Overvew Power Xpert Mult-Pont Meter November 0 Sheet 00 PXMB-MB-AB Note: For all voltage connectonsfuses should be szed n accordance wth best practces to protect the nstrumentaton wre. 0 Fgure.-. Sngle-Phase, Three-Wre 0/0 Voltage Connecton Inputs 0 Fgure.-. 0/0 Sngle-Phase, Three-Wre Servce Current Sensor Connectons For more nformaton, vst: CA0000E

69 0 0 REMOVE POWER BEFORE SERVICING MORE THAN ONE LIVE CIRCUIT. SEE DIAGRAM. AVERTISSEMENT: CET EQUIPEMENT RENFERME PLUSIEURS CIRCUITS SOUS TENSION. VOIR LE SCHEMA. DO NOT HIPOT / DIELECTRIC TEST b November 0 Sheet 00 Eaton Submeter Overvew Power Xpert Mult-Pont Meter.- Dmensons n Inches (mm) Mountng Dmensons 0.0 (.). (.) CT Inputs Fgure.-0. Sngle UntFront Vew XX XX XX XX B A Meter Module Com Health Pulse - XX - XX - XX Pulse - XX - B - A 00mA Sensor 0. (.0) 0 Meter Module Com Health Pulse - XX - XX - XX Pulse - XX - B - A 00mA Sensor Meter Module Com Health Pulse - XX - XX - XX Pulse - XX - B - A 00mA Sensor Meter Module Com Health Pulse - XX - XX - XX Pulse - XX - B - A 00mA Sensor Meter Module Com Health Pulse - XX - XX - XX Pulse - XX - B - A 00mA Sensor Meter Module Com Health Pulse - XX - XX - XX Pulse - XX - B - A 00mA Sensor Meter Module Com Health Pulse - XX - XX - XX Pulse - XX - B - A 00mA Sensor (.0) Pulse In Module Com Health PI PI PI PI PI PI PI PI Vdc PI PI PI PI PI PI PI PI V Output Module Com Health O O O O O O O O Vdc 0mA Max 0 O O O O O O O O Lnk Portal Module Health Status Com Reset Local IP /0 Local Lnk 0/00 DHCP TX ST 0/00 LAN LAN Modem Mode Slave Address Power Status Delta Wye /PH Health Power Xpert Multpont Meter Confg. Port TX RX TX RX Meter Base WARNING RS- (Com ) RS- (Com ) Cat. No. PXMP-MB-XX Style No. DGXX Rev. X SN: XXXXXX FW Verson X.X Date Code: WYYMMDD Made n USA Meter C Voltage Inputs 0V~ L:G Max. B V~ L:N Max. 00V~ L:L Max. A CAT III Freq. - Hz See manual for complete ratngs Vdc 0mA Output Sheld Common D D 0 Sheld Common D D PS Input Ratng -Vdc Vdc Vdc W Max Shld N (VR) C (V) B (V) A (V) Vdc Inputs Common Input Input Input nc nc 0 nc. (.0).00 (0.) 0 Fgure.-. Sngle UntTop Vew Power Xpert Multpont Meter Cat. No. PXMP-EPM-X Style No. D0G0X Rev. X Seral No. XXXXXX FW X.XX WYYMMDD Techncal Support Made n USA.0 (.). (.) 0.0~0. (.~.0). (.0).0 (0.) 0. (.0) R Typ.. (.) Outer. (.). (.). (.) Cut-Out Dmensons Fgure.-. Sngle UntSde Vew Fgure.-. PXMP Color Touchscreen Dsplay 0 CA0000E For more nformaton, vst:

70 .- Eaton Submeter Overvew Power Xpert Mult-Pont Meter November 0 Sheet 000 Table.-. Current Sensor Dmensons n Inches (mm) Sensor H W ID PXMP-CS. (.). (.) 0. (.) PXMP-CS0. (.). (.). (.) PXMP-CS00. (.).0 (.). (.) ID H Blue Locator LED Termnal Block Fgure.-. Current Sensor Dmensons W PXMP-SCX Cable Connecton Stran Relef Strap Holes Fgure.-. Open Interface Module (PXMP-IMMV) mv Sensor Secondary Leads 0 0 For more nformaton, vst: CA0000E

71 November 0 Sheet 00 Eaton Submeter Overvew IQ Energy Sentnel.- IQ Energy Sentnel IQ Sentnels IQ Sentnels are mcroprocessorbased submeters, desgned to montor power and energy. They represent an alternatve to nstallng separate wattmeters, watthour meters, and watt demand meters. The IQ Energy Sentnel montors watts, watthour and watt demand. Key advantages nclude unmatched savngs n space, lower nstallaton costs, and the capablty to communcate data readngs n a varety of ways. IQ Sentnels wth bult-n CTs and communcatons have the added beneft of greater overall system accuracy. Conventonal meterng often s less accurate snce external CTs and separate transducers may each have naccuraces of % or more. IQ Sentnel Table.-. IQ Energy Sentnel Features Features Benefts Montors (accuracy stated full scale) Klowatts ±.0% Klowatts demand ±.0% Klowatt hour ±.0% Bult-n CTs verson up to 00A or external CTs verson up to 000A Breaker, panel or DIN ral mounted Powered drectly off the lne Bult-n communcaton capablty Address set by DIP swtches Communcaton at 00 baud Nose mmune INCOM protocol Choce of operator nterfaces Subnetwork master local dsplay Breaker Interface Module (BIM) Power Management Energy Bllng software Power Management software UL and CSA lsted One devce replaces multple meters and/or transducers Improved system accuracy Savngs n product cost Savngs n space Savngs n nstallaton cost No external power source s needed Permts remote montorng and nterconnecton wth programmable logc controllers and buldng management systems. For more nformaton, see secton on Power Management Software Systems Desgned to nterface drectly wth Power Management Software Energy Bllng software Flexbltydsplays what s needed where t s needed Power Management Software 0 0 CA0000E For more nformaton, vst:

72 .- Eaton Submeter Overvew IQ Energy Sentnel November 0 Sheet 00 0 IQ Sentnels (Contnued) Eaton s IQ Sentnels provde a unque cost-effectve method to mplement energy submeterng at lower levels n the dstrbuton system. The ablty to montor power dstrbuton systems down to the machne or process level at an ndustral faclty has become essental to provde key benefts such as to verfy the accuracy of the utlty bll, dentfy and track energy usage to the loads that consume t, develop a faclty energy profle to establsh a baselne, allocate energy costs to create accountablty and so on. An optonal door-mounted nterface, the Subnetwork Master Local Dsplay, s avalable to dsplay the energy parameters montored by the IQ Sentnels. Submeterng applcaton examples for the IQ Sentnels nclude energy demand montorng, product cost analyss, process machne tool effcency and productvty mprovement, and energy-cost allocaton or tenant bllng for commercal, ndustral, recreatonal and resdental facltes. Note: For customer-bllng applcatons, consult local utlty for meterng requrements. Commercal applcatons nclude energy-cost allocaton wthn conventon halls, offce buldngs, shoppng malls, hosptals, warehouses and storage facltes. Industral applcatons nclude departmental bllng and process/assembly lne energy cost analyss. IQ Energy Sentnels may be substtuted for watt transducers when montorng machne tool and equpment performance wthn plants. Recreatonal facltes nclude sports arenas, campng grounds, traler parks and marnas. The IQ Sentnel may be appled on three-phase (three- or four-wre), as well as sngle-phase (three-wre) systems. IQ Sentnels may be appled on ether 0 or 0 Hz systems. Applcaton Descrpton The IQ Energy Sentnel s avalable n three dfferent package versons: breaker mounted, unversal breaker wth nternal CTs, and unversal breaker wth external CTs. Desgned for mountng on Seres C crcut breakers used n Eaton assembles such as: Pow-R-Lne four panelboards feeder crcuts Power-R-Lne C swtchboards feeder crcuts Motor control centers and enclosed control wth crcut breaker dsconnectsstarter or feeder crcuts Enclosed motor control Enclosed crcut breakers Pow-R-Way III Bus Plugs wth crcut breaker dsconnects Breaker Mount Applcatons New Equpment F-Frame Breaker wth IQ Sentnel Retrofttng The space-savng desgn characterstcs of the breaker mount IQ Energy Sentnels allow them to be added to exstng Eaton crcut breakers at any tme...often wth no addtonal space or modfcatons requred. Or they may be nstalled when upgradng from older crcut breakers...often wth no addtonal space or modfcatons requred. Unversal Mount wth Internal CTs Unversal Mount Applcatons The unversal mount IQ Energy Sentnel wth nternal CTs ncludes ntegral 00A CTs and may be appled on loads up to 00A. The unversal mount IQ Energy Sentnels wth nternal CTs may be used wherever breaker mountng s not feasble or possble. The unversal mount IQ Energy Sentnel wth provsons for external CTs may be appled on loads up to 000A. They are usually used for montorng loads larger than 00A, on power cable szes larger than 00 kcml or on crcuts contanng more than one conductor per phase. 0 For more nformaton, vst: CA0000E

73 November 0 Sheet 00 Eaton Submeter Overvew IQ Energy Sentnel.- Eaton Breaker Mount Eaton s breaker mount IQ Energy Sentnel nstalls n less than 0 mnutes on the load sde of a Eaton Seres C F-Frame (0A), J-Frame (0A), or K-Frame (00A) crcut breakers. Voltage Tangs Transmt LED DIP Swtch Address Energy Sentnel Features Ground/Neutral Connecton Communcatons Connectons Unversal Mount wth Internal CTs(UI) The Unversal Mount IQ Energy Sentnel wth nternal CTs may be panel-mounted or DIN ral mounted on dsconnects or other crcuts up to 00A. A pull-apart termnal block s provded on the devce for connecton of the system voltage reference wrng. Note: The locaton of the ground/neutral connecton dffers on Breaker Mount IQ Energy Sentnels from the locaton of the ground/ neutral connecton on Unversal Mount IQ Sentnels. Incorrect wrng to the ground/neutral and communcatons connectons may result n accuracy and communcaton errors. Unversal Mount for External CTs(UE) The Unversal Mount IQ Energy Sentnel for external CTs may be panel-mounted or DIN ral mounted on crcuts up to 000A. A pull-apart termnal block s provded on the devce for connecton of the system voltage reference wrng as well as another termnal block for connecton to the user s exstng A secondary CTs that may range n standard ratos from : up to 000:. Note: If the devce wll be dsconnected wthout nterrupton of the montored load, the use of a CT shortng block s advsed. 0 Communcatons Connectons Communcatons Sheld Connecton Communcatons Connectons Communcatons Sheld Connecton CT Termnal Block Ground/Neutral Connecton Voltage Termnal Block Energy Sentnel Features Voltage Termnal Block Ground/Neutral Connecton 0 CA0000E For more nformaton, vst:

74 .-0 Eaton Submeter Overvew IQ Energy Sentnel November 0 Sheet 00 0 Techncal Data and Specfcatons Table.-. Energy Sentnel Current Input Current Range: % to % of current ratng Burden: VA Voltage Input Voltage Range: ±0% of voltage ratng Frequency 0 or 0 Hz Power Factor Range All ( to ) Communcatons Protocol: INCOM Speed: 00 baud Compatblty: Power Management Software compatble Envronmental Condtons Operatng temperature: to 0 C ( to F) Storage temperature: 0 to C ( 0 to F) Operatng humdty: % to % relatve humdty noncondensng Dmensons D x W x H n Inches (mm) F.0 x. x.0 (. x 0. x.0); CT wndow sze 0. (.0) J.0 x. x. (0. x 0. x.); CT wndow sze 0. (.) K.0 x. x. (0. x. x.); CT wndow sze 0. (.) UI. x. x.00 (0. x. x.); hole clearance. (.) UE. x. x.00 (0. x. x.) Weght n Lbs (kg): F 0. (0.0) J 0. (0.) K 0. (0.) UI.0 (0.0) UE.0 (0.0) Other Specfcatons UL Fle No. E CSA Fle No. LR0-0 C (standard) maxmum for Seres C crcut breakers. Acceptable for Unversal IQ Energy Sentnels only. System Voltage Consderatons (Applcaton Note) The Ground (GND) termnal of the IQ Energy Sentnel should be connected to the ground bus or other non-current- carryng ground wth 00V rated wre to ensure accuracy. Three-Phase Star, Four-Wre, Earthed Neutral. Three-Phase Star, Three-Wre Three-Phase Star, Four-Wre, Non- Earthed Neutral. Three-Phase Star, Three-Wre, Earthed Neutral Pont. Fgure.-. Acceptable System Confguratons Phase A Phase C Sngle-Phase, Three-Wre, Earthed Md-Pont (Connect to A and C Phases). Three-Phase Delta, Three-Wre Note: Acceptable for Unversal IQ Energy Sentnels only. Phase A Neutral Phase C Two-Phase Star, Three-Wre, Earthed Neutral (Connect to A and C Phases). Three-Phase Open Delta, Four-Wre, Earthed Juncton. 0 For more nformaton, vst: CA0000E

75 November 0 Sheet 00 Eaton Submeter Overvew IQ Energy Sentnel.- Table.-. IQ Energy Sentnels Catalog Informaton Descrpton Voltage RatngVac Current Ratng Maxmum Amperes For F-Frame breakers For F-Frame breakers For F-Frame breakers For F-Frame breakers For J-Frame breakers For J-Frame breakers For J-Frame breakers For J-Frame breakers For K-Frame breakers For K-Frame breakers For K-Frame breakers For K-Frame breakers Unversal wth nternal CTs Unversal wth nternal CTs Unversal wth nternal CTs Unversal wth nternal CTs Unversal for external CTs Unversal for external CTs Unversal for external CTs Unversal for external CTs 0/0, 0, 0Y/0 0/0, 0/00, 0/ 0, 0Y/ 00, 00Y/ 0/0, 0, 0Y/0 0/0, 0/00, 0/ 0, 0Y/ 00, 00Y/ 0/0, 0, 0Y/0 0/0, 0/00, 0/ 0, 0Y/ 00, 00Y/ 0/0, 0, 0Y/0 0/0, 0/00, 0/ 0, 0Y/ 00, 00Y/ 0/0, 0, 0Y/0 0/0, 0/00, 0/ 0, 0Y/ 00, 00Y/ Table.-. Termnal, Cable and Wrng Gudelnes Sentnel Eaton Seres C Termnal Wre Sze Sngle Conductor Catalog Number IQESF0 IQESF00 IQESF0 IQESF00 IQESJ0 IQESJ00 IQESJ0 IQESJ00 IQESK0 IQESK00 IQESK0 IQESK00 IQESUI0 IQESUI00 IQESUI0 IQESUI00 IQESUE0 IQESUE00 IQESUE0 IQESUE00 F-Frame J-Frame K-Frame Unversal wth nternal CTs System voltage reference wrng Current transformer wrng Ground reference wrng Communcatons wrng B00G0, G, G, G T0KB, TA0KB T0K, TA0KB # /0, # /0, # /0, # /0 AWG # 0 kcml #0 00 kcml #0 00 kcml # #0 AWG # AWG (maxmum) # # AWG (mnmum 00V rated) Eaton IMPCABLE or Belden famly 0 0 CA0000E For more nformaton, vst:

76 .- Eaton Submeter Overvew IQ Energy Sentnel November 0 Sheet 00 Dmensons n Inches (mm) F-Frame Energy Sentnels J-Frame Energy Sentnels K-Frame Energy Sentnels 0. (.) Typcal 0. (.).0 (.0) 0. (.) Typcal. (.). (.) 0. (.) Typcal.0 (.). (.) 0.0 (.) 0. (.) Radus. (.) Typcal.0. (.) Typcal (0.) (.) (.).. (.) (.).0 (.). (0.).0 (.) 0. (.0).0 (0.). (.) Unversal wth Internal CTs Energy Sentnels. (.).0 (.) 0.0 (.) Typcal.. (.) (.).0 (.). (0.).00 (.).0 (.) 0. (.) Radus. (.). (.) Unversal wth External CTs Energy Sentnels.0 (.). (.).0 (.). (.). (.).00 (.).0 (.). (.).0 (.0). (.). (.).0 (.0). (.). (.). (.). (.) Dameter. (0.). (0.) 0 Fgure.-. IQ Sentnel. (.). (.). (.) For more nformaton, vst: CA0000E

77 November 0 Sheet 00 Eaton Advanced Meters Molded-Case Crcut Breaker Power Montorng and Meterng Module.- Molded-Case Crcut Breaker Power Montorng and Meterng Module (PM) Power Montorng/Meterng Module (PM) General Descrpton The Power Montorng and Meterng Module (PM) s a UL-lsted add-on communcatons module that mounts drectly to the load sde of three-pole molded-case crcut breakers, smlar to an earth leakage module. The PM adds revenue accurate power meterng and breaker status montorng to new and/or exstng Seres C and Seres G breakers. Regardless of the type of trp unt (thermal-magnetc or electronc), the PM can be appled n applcatons where power meterng, crcut breaker montorng and/or communcatons s essental. The PM s extremely flexble and can be used n man breaker or feeder breaker applcatons. The automatc voltage sensng means that the same PM module can be used on 0, 0 or 0 Vac applcatons. It can also be nstalled n reverse-feed and reverse-phasng (CBA) applcatons. Features and Functons The PM provdes the followng meterng, montorng and communcatons functons: Meterng Phase currents (Ia, Ib, Ic, Iavg) Phase-to-phase voltages (Vab, Vbc, Vca, Vavg) Phase-to-neutral voltages (Van, Vbn, Vcn, Vavg) Real power (kw)total and per phase Reactve power (kvar)total and per phase Apparent power (kva)total and per phase Power factortotal and per phase Real energy (WHr)forward, reverse and net Reactve Energy (VARHr)forward, reverse and net Apparent energy (VAHr)forward, reverse and net Accuracy Voltage and amperage: 0.% of readng Watts, VARs, VA: % of readng Energy: % per ANSI C. Revenue Grade Accuracy: ANSI C. Montorng Breaker status Open/close statusthru breaker auxlary contact Trpped statusthru breaker bell alarm contact Unt healthflashng status LED when module s powered Breaker must nclude auxlary contact and bell alarm contact accessory. Communcatons INCOM and Modbus RTU communcatons Shelded-twsted par communcatons Dasy-channg of multple unts Web-based communcatons avalable through a Power Xpert Gateway TX and RX communcaton dagnostc LEDs Meterng Module Control Power The PM s powered drectly from the crcut breaker voltage for applcatons 0 Vac and below. External control power s not requred for these applcatons. However, an auxlary Vdc external power nput s ncluded for applcatons requrng communcatons capablty even when the breaker crcut s de-energzed. Note: For 00V applcatons, external Vdc auxlary power s requred. Product Selecton Table.-0. PM Product Selecton PM Modules Catalog Number Frame 0V 00V Modbus FD JG KD and LG INCOM FD JG KD and LG PMFI0 PMJI0 PMLI0 PMFM PMJM PMLM PMFI00 PMJI00 PMLI CA0000E For more nformaton, vst:

78 .- Eaton Advanced Meters Molded-Case Crcut Breaker Power Montorng and Meterng Module November 0 Sheet Techncal Data and Specfcatons Metered parameters Ia, Ib, Ic Vab, Vbc, Vca, Van, Vbn, Vcn Apparent Energy, Forward Real Energy, Reverse Real Energy, Net Real Energy, Laggng Reactve Energy, Leadng Reactve Energy, Net Reactve Energy Apparent Power A, B, C; Apparent Power Total; Reactve Power A, B, C; Reactve Power Total; Real Power A, B, C; Real Power Total Frequency, Apparent Power Factor, Apparent PFA, Apparent PFB, Apparent PFC Table.-. PM Power Montorng and Communcatons Module Techncal Specfcatons for Modbus RTU Descrpton Specfcaton Current Inputs Pckup current 0.A rms Maxmum reported current FD/JG 0A rms KD/LD 0A rms Accuracy 0.% 0.% of readng Voltage Inputs Range Lne-to-neutral 0 Vac Lne-to-lne Vac Supported systems Three-element wye, three-element wye neutral Two-element delta, four-wre delta systems Input mpedance kloohm/phase Burden per phase 0. VA/phase max. at 00V; 0.0 VA at 0V Phase voltage connectons Internal va screw termnal to busbar. For wye system, a neutral s requred to be connected to the PM on the rght Phoenx connector. Neutral connecton If neutral s not avalable, the meter wll calculate a vrtual neutral based on the phase-to-phase rms voltage. The system voltage must be balanced for ths to be accurate. Frequency Frequency 0/0 Hz Accuracy ± 0. Hz Resoluton 0. Hz Power and Energy Accuracy % of readng (ANSI C.) Isolaton All nputs and outputs are galvancally solated to 00V. Envronmental Ratngs Operatng temperature 0 C to 0 C Storage temperature 0 C to 0 C Operatng humdty to % RH noncondensng Sensng Method Voltage, current True rms Samplng rate.0k samples per second Update Rate Watts, VAR and VA.0 sec at 0 Hz All other parameters.0 sec at 0 Hz Power Supply (External) DC voltage 0 Vdc Maxmum current 0 ma at Vdc Burden 0.W Standard Communcaton Format Connecton type Three-wre RS- (A, B, Common) Com port baud rate 00 or,00 bauds Default:,00 bauds Modbus address range 0 Data format Selectable (, N,, N,, Default:, N, Even,, Odd, ) Protocols Modbus RTU Internal termnaton resstor selectable ON or OFF Va DIP swtch Default: Enabled For more nformaton, vst: CA0000E

79 PUSH TO TRIP O N O F F O N O N Power Montorng/ Meterng Module Tx Rx STATUS Settngs O N A B MODBUS COM EARTH Vdc () Power Vdc ( ) Network Address Bell Alarm COM COM Aux. Alarm V Neutral See breaker for termnal nformaton. See nstructon sheet for hgh voltage tests. For use on Seres G, L-Frame or Seres C, K-Frame Crcut Breaker, Swtch, Motor Crcut Protector. Power Montorng/ Meterng Module Tx Rx STATUS Settngs Network Address O N Bell Alarm A COM B MODBUS COM COM Aux. Alarm EARTH V Neutral Vdc () See breaker for termnal nformaton. Power Vdc ( ) See nstructon sheet for hgh voltage tests. For use on Seres G, L-Frame or Seres C, K-Frame Crcut Breaker, Swtch, Motor Crcut Protector. November 0 Sheet 00 Dmensons and Weghts Approxmate Dmensons n Inches (mm) Eaton Advanced Meters Molded-Case Crcut Breaker Power Montorng and Meterng Module.-. (.) 0. (.) Lne End.0 (.). (.). (.0). (.) 0. (.) Lne End. (0.).0 (0.). (.).0 (.). (.) On Off. (.).00 (.) C L Handle SEALED FACTORY. (.) C L Handle. (.0). (.) On/I Off/O. (.) C L Handle 0. (.). (.) C L Handle. (.).0 (.). (0.) Load End.00 (.). (.). (.). (00.). (0.) ON.. (.). (.) Load End (.). (0.).0 (0.). (.0) Fgure.-. FD Three-Pole wth PM Modbus Fgure.-0. KD Three-Pole wth PM Modbus. (.) 0. (.) Lne End. (0.). (.). (.). (.) 0. (.) Lne End. (0.).0 (0.). (0.) 0. (0.).0 (.) 0.0 (.). (00.).0 0 (.) C L Handle.00 (0.) SEALED FACTORY. (00.) C L Handle. (0.). (.). (.) C L Handle 0. (.). (0.). ON (.0). (.) C L Handle.0 (.). (0.) Load End. (.). (.). (.0). (.). (.) Load End. (0.).0 (0.). (.) Fgure.-. JG Three-Pole wth PM Modbus Fgure.-. LG Three-Pole wth PM Modbus Table.-. PM Dmensons and Shppng Weghts Descrpton Frame Dmensons and Weghts Weght n lbs (kg) FD. (0.) JG.0 (0.) KD/LG. (.0) Basc unt n nches (mm) FD. W x.00 L x. H (0. x.0 x.) JG. W x.00 L x. H (0. x.0 x.) KD/LG. W x.0 L x.0 H (. x.0 x 0.) Shppng contaner dmensons n nches (mm) FD/JG.00 x. x.0 (0. x 0. x.) KD/LG. x. x.00 (. x 0. x.) 0 CA0000E For more nformaton, vst:

80 .- November 0 Sheet Ths page ntentonally left blank. For more nformaton, vst: CA0000E

81 November 0 Sheet 00 IQ Analyzer 000 Seres 00 Seres wthout Waveform Dsplay, 00 Seres wth Waveform Dsplay General Descrpton Applcatons Montorng of over 0 electrcal parameters Power qualty management Energy management Metered/Montored Parameters rms sensng Phase, neutral and ground currents Volts: L-L, L-N, Avg. L-L, Avg. L-N, N-G Power: real, reactve, apparent (system and per phase) Frequency Power factor: apparent and dsplacement (system and per phase) Energy and demand (forward, reverse, net) real, reactve apparent at four dfferent utlty rates Indvdual current and voltage harmoncs: magntude, phase angle % THD: current and voltage Waveform capture Mnmum/maxmum values Event loggng/dsturbance recordng ANSI C.0 Class 0.% revenue meterng accuracy, ANSI C., IEC Class 0.% Accuracy Currents and voltages: ±0.0% Power, energy and demand: 0.0% Frequency: 0.0 Hz Power factor: 0.0% Accuracy mantaned from % 00% of full scale and from 0.0 to.00 to 0.0 power factor Eaton Electronc Meters IQ Analyzer000 Seres Communcatons Optonal nterface capablty to computer network for data collecton, storage and/or prntout va the Eaton Power Management software. Physcal Characterstcs Graphcal reverse-mode LCD dsplay wth LED backlght Up to seven lnes of nformaton Heght: 0. nches (0. mm) Wdth:. nches (0. mm) Depth:.0 nches (. mm) wthout PONI,. nches (. mm) wth PONI Membrane faceplate NEMA R and rated Lstngs/Certfcatons UL lsted, Fle E, NKCR Fle E (CE versons) cul lsted #00. C. CE mark EN00- EN00- Measurement Canada Electrcty Meter AE-0 CSA approved IQ Analyzer 00 Seres Features IQ AnalyzerComprehensve Electrcal Dstrbuton Montorng The IQ Analyzer s a complete soluton to montor and manage all aspects of the electrcal dstrbuton system. Its hgh-performance meterng exceeds ANSI C. (0.%) specfcaton for revenue meters and meets ANSI C.0 Class 0.%, provdes qualty true rms readngs through the 0th harmonc, accurately measures nonsnusodal waveforms up to a.0 crest factor, and dsplays even and odd multples of the fundamental current and voltage through the 0th harmonc. Both magntude and phase angle of the harmoncs are dsplayed. Note: For defnton of power qualty terms, see Page.-. The unque operator nterface, whch ncludes a reverse-mode LCD dsplay, easy-to-use Meter Menu screens and detaled Analyss screens, s desgned to allow a wealth of real-tme and recorded nformaton to be accessed easly by an operator. All programmng can be accomplshed through the faceplate or the communcatons port. The comprehensve onlne Help feature provdes useful nformaton on devce operaton, programmng and troubleshootng CA0000E For more nformaton, vst:

82 .- Eaton Electronc Meters IQ Analyzer000 Seres November 0 Sheet Dsturbance Informaton Wth the communcatons opton and Eaton s Power Management software and Waveform Dsplay software, a Waveform Analyss wll construct waveforms of up to cycles of all currents and voltages (ncludng neutral and ground) to help troubleshoot undervoltage/sag and overvoltage/swell condtons. (See CBEMA Trend Loggng secton.) By programmng a reset threshold, the duraton of the voltage dsturbance can also be ndcated. The IQ Analyzer 00 seres wth Graphc Waveform Dsplay offers the ablty to vew the captured waveform rght at the devce. The 00 seres also offers the ablty to detect and capture sub-cycle voltage dsturbances. Extensve Harmonc Dstorton Analyss Current and voltage dstorton data are dsplayed at the devce and are accessble through the communcatons port. Ths ncludes % THD, K-Factor, crest factor, CBEMA factor, and both magntudes and phase angles of all harmoncs through the 0th. A snapshot sample of ths nformaton may be actvated by user commands, dscrete nputs or programmable thresholds to capture dstorton data durng condtons of real nterest. To help elmnate nusance alarms, harmonc dstorton nformaton can be captured and relay outputs actvated when THD exceeds a programmable percentage of fundamental or a programmable magntude (e.g., amperes) threshold. Tme-of-Use Meterng The IQ Analyzer offers the ablty to store energy usage data for tme of use revenue meterng. It can be programmed for any combnaton of weekday, Saturday, Sunday, holdays, seasons, schedules, and 0 tme perods per schedule. The IQ Analyzer wll keep track of the followng parameters for four dfferent utlty rates: Watthours VAR-hours VA-hours Current demand Watt demand VA demand VAR demand Hstorcal Trend Loggng The IQ Analyzer s equpped wth on-board loggng capablty, whch ncludes the ablty to log a total of parameters wth ntervals rangng from 0. seconds (every cycles) to twce a week (00 mnutes). The trendng functon can begn mmedately or can be trggered upon recept of a dscrete nput nto the IQ Analyzer. On-board loggng provdes a cost-effectve means of dstrbuted data storage, where realtme communcatons may not be feasble or for applcatons where data storage redundancy s desred. Four trend data logs are stored n non-volatle memory aboard the IQ Analyzer and can be retreved at the dsplay or va communcatons for vewng usng Eaton software. Up to parameters wth storage capacty for up to 0,000 data ponts Up to days of data can be stored when recordng a parameter every mnutes Trends, and can save data on a dscrete contact nput Trend can save data on a power qualty or meter event Mnmum and maxmum recordng (mn./max. three-phase average current, max. IG, mn./max. threephase average VLL and VLN, max. VNG, max. system watts, VARs and VA, mn./max. apparent and dsplacement PF). Usng ths feature, mnmum and maxmums reached durng each trend nterval are recorded ITIC (formally CBEMA) Trend Loggng The IQ Analyzer can be confgured to store the necessary data so that PowerNet can dsplay a sag or swell voltage event on the ndustry standard ITIC (formerly CBEMA) curve for predctve mantenance and troubleshootng. Ths applcaton uses the IQ Analyzer waveform capture for hgh-speed events along wth hstorcal trend loggng for longer term voltage dsturbances. Once ths data s uploaded to a PC runnng the Power Management Software Event Vewer, the nformaton s analyzed, dsplayed and stored. Automatc uploadng of ITIC events can be selected n PowerNet. A three-phase event wll be correctly dsplayed as a sngle pont on the ITIC curve. Event Loggng The IQ Analyzer wll store n nonvolatle memory the tme and reason for last 0 events. These events can be vewed from the graphcal dsplay or accessed va communcatons. In addton to all of the meter events lsted n the Event Condtons paragraph on Page.-, the followng events are entered nto the event log. Tme and date of: Alarms Meter power up All resets All settng changes Communcatons establshed or lost Event loggng s another powerful troubleshootng tool wthn the IQ Analyzer. Extensve I/O and Communcatons Capablty One analog and three dgtal nputs are provded to nterface wth sensors and transducers. Three analog outputs and four relay contacts are furnshed to share data wth PLCs and control systems and to actuate alarms and control relays. Termnals are captve clamp type and fnger safe. Wth the communcatons opton, the devce can be remotely montored, controlled and programmed. Ratngs Applcaton to 00 kv, no PTs to 00V CT ratos selectable from : A to 0,000: A Standard 0/00 Vac lne Three-phase power supply module, Vac Separate source power supply module avalable, 00 0 Vac or 00 0 Vdc DC only separate source power module also avalable, Vdc For more nformaton, vst: CA0000E

83 November 0 Sheet 00 Eaton Electronc Meters IQ Analyzer000 Seres.- Dsplayed Informaton Features All nformaton s accessble at the devce or through the communcatons port va Eaton s Power Management Software Qualty true rms readngs through 0th harmonc Comples wth the accuracy porton of ANSI C.0 Class 0.% revenue meterng specfcaton Accurate readngs for nonsnusodal waveforms wth up to.0 crest factor Screens dsplay auto rangng unts, klo unts, mega unts as needed 0-dgt energy readngs Dsplays multple parameters at the same tme Programmable custom screens Meter Menu Screens Meter Menu Examples of Meter Menu Custom Screen Custom Screen The IQ Analyzer allows a user to vew commonly used parameters by scrollng through ts LED ndcator Meter Menu. Meter Menu Dsplayed Informaton Current: Phases A, B, C, average Neutral Ground (separate CT) Voltage: Phases A-B, B-C, C-A, average Phases A-N, B-N, C-N, average Neutral-ground Power: Real (watts) Reactve (VARs) Apparent (VA) Phases A, B, C and system Energy (forward, reverse and net): Real (kwh) Reactve (kvarh) apparent (kvah)no reverse or net Frequency, tme and date Demand: System current (amperes) Systems real power (kw) System reactve power (kvar) System apparent power (kva) Power factor: Phases A, B, C and system Dsplacement Apparent % THD current: Phases A, B, C, N % THD voltage: Phases A-B, B-C, C-A Phases A-N, B-N, C-N K-Factor ITIC (CBEMA) deratng factor (dsplayed as Z ) Crest factor Dscrete nput and output status Analog nput readng CustomUser may program four screens to show any combnaton of seven Meter Menu parameters per screen Harmonc Analyss Screens Harmonc Spectrum Avalable wth Model 00 Mnmum and Maxmum Values Current: Phases A, B, C, N, G Voltage: Phases A-B, B-C, C-A Phases A-N, B-N, C-N, N-G Power: Real (watts) Reactve (VARs) Apparent (VA) Phases A, B, C and system Power factor: Apparent Dsplacement (three-phase and system) Frequency. THD (amperes, volts, and %): Current (phases A, B, C, N) Voltage (phases A-B, B-C, C-A, A-N, B-N, C-N) All mnmum/maxmum values may be reset va reset pushbutton on faceplate, dscrete nput or communcatons command. Values are updated at least once every lne cycles. The F functon key accesses the Harmonc Analyss screens. Two cycles of data sampled at samples/cycle are smultaneously recorded for: Current: Phases A, B, C, N, G Voltage: Phases A-B, B-C, C-A Phases A-N, B-N, C-N Neutral to ground Magntudes (or % of fundamental) of odd and even multples of the fundamental from nd 0th are dsplayed. The phase angle assocated wth each multple of the fundamental s also dsplayed. 0 0 CA0000E For more nformaton, vst:

84 .- Eaton Electronc Meters IQ Analyzer000 Seres November 0 Sheet 00 0 Event/Alarm Analyss Screens Example of Event Analyss Screens Waveform Screen Avalable wth Model 00 Pressng the F functon key accesses the Event Analyss screens. These dsplay the followng data for up to ten event/alarm condtons: Descrpton, date, and tme of event/alarm wth 0 mllsecond resoluton Current, voltages, power readngs, demand readngs, frequency and % THD at tme of event/alarm Current and voltage dstorton nformaton avalable on Harmonc Analyss screens Event data s stored n non-volatle memory. If a reset threshold s programmed, the duraton of the event (e.g., undervoltage) s also dsplayed. Wth Eaton s PowerNet communcatons opton and Seres III software, waveforms and harmonc profles may be dsplayed on a PC. Event Condtons Events may be trggered by up to seven of any of the followng condtons: Voltage Dsturbances Undervoltage/sagany VL-L, VL-N (0% 00%) Note: 0% mnmum for self-powered unt. Overvoltage/swellany VL-L, VL-N (00% 0%) If zero tme delay s programmed, any dsturbance lastng two cycles (less f magntude s suffcent to effect rms readngs) wll trgger a voltage dsturbance event/alarm. Sub-cycle transent capture/excess dv/dt on VA-N, VB-N, VC-N Note: 00 Seres only. Sub-cycle voltage nterrupton on VA-N, VB-N, VC-N Note: 00 Seres only. Maxmum Threshold Exceeded Currentsphases A, B, C, neutral and ground Voltageneutral to ground System powerwatts, VA, VARs System power factordsplacement and apparent Demand Currentsphase A, B, C and AVG System powerwatts, VARs, VA Frequency % THD or magntude total harmonc dstorton Currents Phases A, B, C, neutral Voltage VA-N, VB-N, VC-N, VA-B, VB-C, VC-A Mnmum Threshold Exceeded Currentsphases A, B, C System powerwatts, VARs, VA System power factor dsplacement and apparent Frequency Voltage Phase Unbalance Voltage L-L, L-N Current Phase Unbalance CurrentPhases A, B, C Dscrete Input Energzed Input,, All trgger condtons have programmable tme delays from 0. to 0 seconds n 0. second ncrements. Demand Recordng Peak Demands are date and tme stamped for: Current phases A, B, C, average System power: Real (watts) Reactve (VARs) Apparent (VA) Input/Output Extensve nput/output capablty s standard on the IQ Analyzer. In addton to montorng three-phase currents and voltages, separate nputs are provded for both ground and neutral currents. Voltage of neutral-toground s also montored to ndcate the presence of harmoncs and potental downstream groundng problems. Analog and dgtal I/O provde nterfaces for transducers, relays, PLCs and control systems. Current Inputs Fve ampere secondary CT connectons for: Phases A, B, C Ground Neutral Separate ground and neutral CT nputs CT range : to 0,000: (any nteger) Voltage Inputs Phases A, B, C (from 0 Vac 00 kv AC) 0/0 Vac control power nput standardnot requred wth optonal lne power module Separate ground-to-neutral voltage reference PT range 0:0 to 00,000:0 (any nteger) External 0V secondary PTs are requred above 00 Vac, optonal from 0 00 Vac. 0 For more nformaton, vst: CA0000E

85 November 0 Sheet 00 Eaton Electronc Meters IQ Analyzer000 Seres.- Dscrete Contact Inputs Three dry contact dscrete nputs may be programmed by the user to: Trgger Event Analyssthe nformaton descrbed n Event Analyss Screens, ncludng Harmonc Analyss nformaton, can be recorded when external devces trp or change state by wrng ther auxlary contacts nto these nputs Act as a synch.-pulse nput to synchronze power demand wndows wth utlty provded synch pulse Actuate a relay output Reset relay output, peak demands, Trend Analyss records and Event Analyss records Wth communcatons opton, provde remote status ndcaton on Eaton s network Power Module Connecton Status of nput contacts s dsplayed n the Meter Menu Custom screen. Relay Output Contacts Four Form C NO/NC relay contacts may be ndependently programmed to: Act as a kwh, kvarh or kvah pulse ntator output Actuate on one or more event condtonsncludng dscrete nput and Eaton Power Management Software command (through communcatons port) Reverse sequence alarm Each Relay may be set for Auto or Manual Reset wth 0 0 mnute release delay (one second ncrements). Relays are Form C NO/NC. Relay(s) programmed to actuate on undervoltage also have a programmable 0 0 mnute delay on power-up for transfer applcatons. Current Transformer Connectons Earth Ground Analog Input Common Analog Input and Outputs One analog nput and four analog outputs may be confgured as 0 0 or 0 ma. The analog nput s dsplayed at the devce as a percentage and s accessble through the communcatons port. The analog nput provdes an nterface wth gas flow meters, temperature transducers or other analog devces. The analog outputs may be programmed to reflect any of the followng: Currentphases A, B, C, average, N, G VoltageL-L, L-N, N-G Power: Real (watts) Reactve (VARs) Apparent (VA) Phases A, B, C and system % THD: Current (phases A, B, C, N) Voltage (L-L, L-N) Frequencysystem Power factor: System dsplacement PF System apparent PF 0 Separate Source Power Supply Analog Outputs Chasss Ground Relay # Relay # Relay # Relay # Remote Inputs Feld Replaceable Fuse Communcaton Connecton System Voltage Connectons Fgure.-. IQ AnalyzerRear Vew 0 CA0000E For more nformaton, vst:

86 .- Eaton Electronc Meters IQ Analyzer000 Seres November 0 Sheet 00 IQ Analyzer Wrng Dagram Three-Phase, Four-Wre (Above 00V) External Potental Transformers and Current Transformers 0 0 Lne Control Power N L L L Fuse Wye Connecton Note: External PTs Not Requred Under 00V Fuse A B C (See Label for 0 Vac/ Vdc Connectons) A B Optonal Ground Current CT Separate Source Power Supply Module (Also Avalable wth Control Power Derved from Montored Lne) Dscrete Contact Inputs HG HN HC HB HA HG HN HC HB HA () (-) () (-) () (-) Fgure.-. Sample Wrng Dagram for a Three-Phase, Four-Wre System C Neutral Termnal CT CT CT CT IQ Analyzer Load Relay No. Relay No. Relay No. Relay No. 0 Analog I/O Outputs Ground Analog Input Earth Ground 0 For more nformaton, vst: CA0000E

87 November 0 Sheet 00 Defnton of Power Qualty Terms Eaton Electronc Meters IQ Analyzer000 Seres Dmensons n Inches (mm).- Dsplacement Power Factor = W W Var = Fundamental (0 Hz) watts to (0 Hz) VA. A rato of fundamental (0 Hz) real power to apparent power. Apparent Power Factor = W VA IQ Analyzer Prevous Level Current F. (0.) Normal Event Relay Program F F F Home Demand Reset 0. (0.) = Total rms watts to VA. A rato of total real power (ncludng harmonc component) to apparent power. K-Factor = A deratng factor that s related to the sum of the squares of harmonc currents tmes the squares of ther harmonc numbers (multples of the fundamental). CBEMA Factor = CF A transformer harmonc deratng factor (THDF) defned as a pure sne wave s crest factor (.) dvded by the measured crest factor. Crest Factor = Σh I n n --- I Σ I n --- = Rato of peak current to rms current. I I rms I Peak I rms I Peak Fgure.-. Defnton of Power Qualty Terms Program Fgure.-. Dmensons and Cutout.0... Voltage Power (Watts) Power (Vars) Power (VA) Energy. Power Factor Frequency % THD Dstorton Factor Custom.0 RAD Places...0 Fgure.-. Drllng Pattern Up Down Help... DIA 0 Places 0. (.. (.).0 (0.) CL CL. (.). (0.0) Fgure.-. Drllng Pattern for Flange Mountng. (.) Typ. for.0 (0.) 0.0 (.). (0.) 0 0 CA0000E For more nformaton, vst:

88 .- Eaton Electronc Meters IQ Analyzer000 Seres November 0 Sheet 00 0 Techncal Data and Specfcatons Table.-. Input/Output Informaton Fuses Self-powered unts wth IQMSSPM have 0.A, 00V Bus Type KTK-R-/ fuses (three requred) Separate source dual voltage unts wth IQMSSPM have a sngle 0.0 (.0) x 0. (0.0) 0.A fuse Separate source DC unts wth IQMDCPM do not have user-replaceable fuses Envronmental Condtons Operatng temperature: 0 to 0 C Storage temperature: 0 to C Operatng humdty: % to % relatve humdty Devce weght:. lbs (. kg) Current Inputs (each channel) Converson: True rms, sample/cycle (all samples used n all rms calculatons) CT nput: A secondary (any nteger : to 0,000:) Burden: 0.0 VA Overload wthstand: 0A AC contnuous, 00A AC second Range: x CT contnuous Accuracy: 0.% of CT prmary ratng, 0.% of readng above 0% of ratng, snusodal (see accuracy below for non-snusodal specfcatons) Input mpedance: 0.00 ohm Voltage Inputs (each channel) Converson: True rms, samples/cycle (all samples used n all rms calculatons) PT Input: Drect or any nteger 0:0 to 00,000:0 Range: 0 to 0 Vac (separate source and DC source) Nomnal Full Scale: Vac Burden: VA (self-powered only) Overload Wthstand: Vac, contnuous 00 Vac, second Input Impedance: megohm Frequency Range 0 Hz fundamental (up to 0th harmonc) Harmonc Response (voltages, currents) 0th harmonc Table.-. Control Power Input When drectly wred to 0 Vac, IQ Analyzer can rde through a contnuous sag that s 0% of rated voltage. Accuracy (n percent full scale) Accuracy from 00% of full scale and from 0.. to.00 to 0. power factor. Current and voltage: ±0.0% Power, energy, and demand: ±0.0% Frequency: ±0.0% Power factor: ±0.0% THD: ±.00% Specfc current accuraces: ±0.0% of full scale to 00% of full scale and 0% crest factor ±0.0% of full scale to 0% of full scale and 00% crest factor ±0.0% of full scale to 00% of full scale and 00% crest factor ±0.0% of readng for currents to 00% of full scale Power and energy: start recordng wth an average of ma secondary current Dscrete Inputs (dry contact) 0 Vdc dfferental across each dscrete nput par of termnals. Mnmum pulse wdth:. msec Optcally solated nputs to protect IQ Analyzer crcutry. Analog Outputs () 0 to 0 ma/ to 0 ma nto maxmum 0 ohm load. Accuracy: %. Analog Input () 0 to 0 ma/ to 0 ma nto 00 ohm load. Accuracy: %. Relay Output Contacts () Form C dry contact: 0A at 0/0 Vac (resstve) 0A at 0 Vdc (resstve) 0A make (0 ms) at 0 Vac/0 Vdc Mnmum pulse wdth: Four cycles ( ms) Wthstand Ratng: 000 Vac, mnute across contacts 000 Vac (contacts to col, mnute) 0,000 Vac (contacts to col, surge voltage) Relay Response Tme (excludng programmed tme delays): lne cycles for dscrete nput, Power Xpert Software command (communcatons port) lne cycles for voltage dsturbance, voltage unbalance 0 lne cycles for all others Descrpton Separate Source Self-Powered DC Source Input range, AC Frequency range Input range, DC Burden 0 0 Vac ±0% Hz 0 0 Vdc ±0% VA 0 00 Vac ±0% Hz N/A VA N/A N/A Vdc ±0% VA 0 For more nformaton, vst: CA0000E

89 November 0 Sheet 00 Eaton Electronc Meters IQ Analyzer000 Seres.- Table.-. Catalog Informaton Descrpton IQ Analyzer, separate source power module IQ Analyzer, Vdc power module IQ Analyzer, three-phase power module IQ Analyzer, separate source power module wth waveform dsplay and sub-cycle voltage dsturbance capture IQ Analyzer, Vdc power module wth waveform dsplay and sub-cycle voltage dsturbance capture IQ Analyzer, three-phase power module wth waveform dsplay and sub-cycle voltage dsturbance capture IQ Flange, to provde extra clearance when mountng.00-nch (. mm) extenson cable for remote mountng of power module.00-nch (.0 mm) extenson cable for remote mountng of power module Vdc separate source power module 00 0 Vac and 00 0 Vdc separate source power module Three-phase, self-powered power module Catalog Number IQA0 IQA0 IQA0 IQA0 IQA0 IQA0 IQFLANGE IQACABLE IQACABLE IQMDCPM IQMSSPM IQMPPM INCOM communcaton module IPONI RS- communcaton module wth Modbus protocol MPONI Use three-phase power module f meter electroncs are to be powered from the three-phase lne voltage of 00V and below. Use separate source power module f the meter electroncs s to be powered from a separate 0 0 Vac or 0 0 Vdc source. Use Vdc power module f only Vdc s avalable to power electroncs. Separate power modules can be ordered f an actve meter needs to have the exstng power supply changed to a dfferent voltage. 0 0 CA0000E For more nformaton, vst:

90 .-0 November 0 Sheet Ths page ntentonally left blank. For more nformaton, vst: CA0000E

91 November 0 Sheet 00 Accessores IQ Flange/Panel Mountng Adapter Kt.- IQ Flange Panel Mountng Adapter Kt for IQ 00/00 Seres and PXM 000 Meters Product Selecton Table.-. Orderng Informaton Descrpton Catalog Number Panel mountng adapter kt IQ 00/00 and PXM 000 Seres adapter kt to IQ Analyzer/ IQ DP-000/IQ Data Dmensons IQ0-PMAK IQ Flange Retroft Applcatons For applcatons where extra doormountng space s requred, a flangemountng unt s avalable. The IQ Flange provdes an extra.0 nches (. mm) of clearance for the devce. For use wth the followng products: IQ Analyzer IQ DP-000 MP-000 DT-000 Product Selecton Table.-. Orderng Informaton Descrpton Catalog Number IQ Flange.0 (.). (.). (.0). (.). (.). (.) 0.0 (.) RAD Places. (.).0 (.) IQFLANGE. (.). (.) Panel Mountng Adapter Kt The flange adapter plate can be nstalled as follows:. Remove the old meter from the panel or door. Many IQ meterng products use the typcal IQ drllng pattern shown n Fgure.- for mountng. Install the flange adapter plate. Mount t from the rear usng the sx screws provded n the kt. The flange adapter plate screw hole pattern shown n Fgure.- should match the typcal IQ drllng pattern. If not, perform the next step. Drll sx holes n the panel or the door to mount the flange adapter plate. Follow the typcal IQ drllng pattern. You need only the top, center and bottom sets of holes. Install the new IQ 00/00 Seres or PXM 000 meter n the flange adapter plate. Secure t from behnd wth four flat washers, lock washers and nuts provded wth the meter. (0.). (.) Fgure.-. Flange Adapter Plate Screw Hole Pattern. (.0). (.0) 0. (0.) 0 0. (.) DIA 0 Places Fgure.-. Typcal IQ Flange Drllng Pattern 0 CA0000E For more nformaton, vst:

92 .- Accessores Sub-Network Master Local Dsplay November 0 Sheet 00 0 Sub-Network Master Local Dsplay (SMLD) Sub-Network Master Local Dsplay General Descrpton Eaton s sub-network master local dsplay (SMLD) s an electronc submeterng devce that provdes users the ablty to vew nformaton from sub-network connected devces locally at swtchgear, swtchboards, panelboards, motor control centers and control panels, nearby or thousands of feet away. The SMLD has a bult-n LCD dsplay wth navgatons for confgurng, as well as montorng. Auto-learn capabltes complete the confguraton requrements, enablng customzaton by use of user-defned descrptons, as well as addng and deletng meters. The SMLD can be operated standalone or n parallel wth the new FetchIT software applcaton or the Power Xpert complete energy montorng system soluton software. Applcaton Descrpton Acqure and dsplay data (no control) from up to 00 devces that can communcate on Eaton s INCOM network, used n the PowerNet montorng system Features, Benefts and Functons Auto-learn connected devces Confguraton stored n non-volatle memory Host communcatons arbtraton algorthm enables seamless ntegraton nto exstng communcaton networks Functons standalone or networked Followng devces are supported: IQ 0/0/0 IQ Multpont Energy Submeter II IQ Energy Sentnel (F, J, K Frames) Unversal Internal Energy Sentnel Unversal External Energy Sentnel Dgtrp OPTIM 00L Physcal Characterstcs Keypad functons: Menu Scroll up Scroll down Enter Backlt LCD, -lne x 0 character Standards and Certfcatons Safety standardsul 00B- EMC Susceptblty Standards IEC 000--, Radated RF Immunty EMC Emssons StandardsFCC Part, Class B Radated Emssons Product Selecton Table.-. Orderng Informaton Descrpton Catalog Number Local dsplay (0 Vac) Local dsplay ( Vac or Vdc) Techncal Data and Specfcatons Frequency Range 0/0 Hz Power Power consumpton: 00 ma (maxmum) at Vac, Vdc SMLD LDISP0 LDISP IQ 0/0/0 Power connector ratng: Vac or Vdc at A Power source: 0 Vac or Vdc, UL Class or CSA Class III SELV transformer n accordance wth C. No The voltage range s to Vac or Vdc, 00 ma (maxmum) Ratngs Operatng temperature: 0 to 0 C Storage temperature: 0 to 0 C Operatng humdty: to 0% maxmum noncondensng Alttude: 0,000 feet (0m) Envronment: ndoor use only Mountng Informaton. H x. W x.0 D nches (.0 H x.0 W x. D mm) Door mount or panel mount Communcatons INCOM Frequency Shft Key (FSK) network compatble 00 baud Non-ntrusve arbtraton algorthm Passve montorng automatcally enabled by arbtraton algorthm whle host PC s communcatng Master on INCOM network upon data request from front panel f host PC s not communcatng Addresses for sub-network devces can be 00 0 hex ( decmals) Dmensons Approxmate dmensons n nches (mm) Table.-. Meter Base Unt Wdth Heght Depth. (.0). (.0).0 (.) Note: DIN ( mm x mm) access cutout. Computer wth Power Management Software IQ ES or PS Dgtrp OPTIM 00C 0 Multple Unts as Requred Fgure.-. Typcal Use Dagram of SMLD For more nformaton, vst: CA0000E

93 November 0 Sheet 00 Accessores Sngle and Mult Unt Enclosed Meters.- Sngle and Mult Unt Enclosed Meters Sngle and Mult Unt NEMA Enclosed MetersFront Vews General Descrpton The Eaton Enclosed Meter lne provdes a complete energy meterng and data acquston soluton n a sngle enclosure. Desgned for Eaton s IQ M, IQ 0, IQ 0/0 and Power Xpert 000/000/000/000 and Mult-Pont Meters, Eaton s Enclosed Meter lne offers mountng and nstallaton flexblty, especally n retroft applcatons where no meterng compartment or mountng space s avalable n the exstng electrcal dstrbuton equpment or where nstallaton tme s a premum. Factory desgned and wred, Eaton s Enclosed Meter lne offers savngs n labor and nstallaton costs because nput current and voltage wrng, as well as I/O wrng, s pre-wred to termnal blocks nsde the enclosure. The Enclosed Meter lne has two offerngs; sngle, prewred unt (specfc IQ 0, IQ 0/0 or PXM 000/000/ 000/000 or PXMP models) and a mult unt (specfc IQ 0, IQ 0/0 or IQ M models). Because the mult unt automatcally ncludes Eaton s Power Xpert Gateway 00E, t facltates measurement and verfcaton of the energy usage on processes and n buldngs. Ths provdes a convenent way to montor energy usage from multple ponts, collect and log specfc energy use parameters, and dsplay and generate logs for hstorcal energy usage reports. Smply put, Eaton s mult unt enclosed meter soluton helps meet any measurement and verfcaton requrement to show energy effcency mprovements and results. In addton to the standard offerng, Eaton can also provde an enclosed meterng soluton talored around your project needs. Applcaton Descrpton Factory desgned and wred to ft varous Eaton power and energy meters at varyng prce ponts, Eaton s Enclosed Meter lne offers savngs n labor and nstallaton costs because nput current and voltage wrng, as well as I/O wrng, s pre-wred to termnal blocks nsde the enclosure. Standalone, enclosed meters are deal for new meterng applcatons where no meterng exsted prevously, retroft nstallatons where energy montorng s a must or where ease of nstallaton s requred. Health care facltes Educatonal facltes and campuses Industral facltes Commercal facltes Government facltes The mult unt offerng consoldates energy-related data avalable from the meters n the enclosure, but also allows for external meters to be added to the embedded Power Xpert Gateway 00E. Through the Power Xpert Gateway 00E s embedded Web server, nformaton can be presented n a varety of ways, a standard Web browser beng the most wdely used method. The enclosed product s a standalone soluton that s deal for many nfrastructure desgns. Further, as needs change and grow, the enclosed product can be ntegrated through Power Xpert Software nto a broader soluton that encompasses other ntellgent hardware and can ntegrate wth thrd-party network management systems (NMS) or buldng management systems (BMS) for system-wde montorng and reportng of energy and power. Features and Benefts Saves nstallaton tme and cost One part number to order; no need to worry that any part has been left out Pck the meter or meters you need as t s desgned to ft varous Eaton power and energy meters, at varyng prce ponts Factory Wred Most electrcal contractors are very famlar wth wrng meters. However, t does take tme to place the dsconnect, CT shortng blocks, termnal blocks, control power transformer, etc. and assocated wrng. It s not uncommon for errors to be ntroduced durng the nstallaton of multple meters; t's just nherent n wrng. Wth Eaton s Enclosed Meter lne, everythng s wred at the factory: the shortng block, termnal blocks, etc., assurng that t s done rght. Further, to ensure safety, Eaton s Enclosed Meter lne ncludes a prmary fusble dsconnect for lne voltage that can be turned off durng meter mantenance. For applcatons wth lne voltages above the rated power supply of the meter, an optonal control power transformer s suppled n the enclosure. Control voltage can also be suppled va a separate source that s wred to the feld nstallaton termnal block. CT nputs for the meter are wred drectly to shortng termnal blocks for easy feld nstallaton. Factory wred products also save on nstallaton tme and costs. The meters are flush mounted on the enclosure door wth all nputs/outputs factorywred to termnal blocks. Note: A meter subpanel assembly s also avalable, whch ncludes all the nternal components of the sngle-unt enclosed meter for the IQ 0/0/0 and PXM 000 Meters wred and mounted on a subpanel to be nstalled nto an exstng electrcal structure. It comes wth a -nch lead for flexblty n mountng the meters at varous dstances. 0 0 CA0000E For more nformaton, vst:

94 .- Accessores Sngle and Mult Unt Enclosed Meters November 0 Sheet 00 NEMA Rated NEMA enclosure prevents dust and other materals from enterng. Internal gaskets also prevent ar rrtants from harmng the vtal equpment nsde. Ths qualty enclosure meets most ndoor applcaton needs. NEMA R enclosure s constructed for ether ndoor or outdoor use to provde a degree of protecton to personnel aganst access to hazardous parts; to provde a degree of protecton of the equpment nsde the enclosure aganst ngress of sold foregn objects (fallng drt); to provde a degree of protecton wth respect to harmful effects on the equpment due to the ngress of water (ran, sleet, snow); and that wll be undamaged by the external formaton of ce on the enclosure. NEMA X enclosure provdes the same degree of protecton as the NEMA R wth the addtonal protecton aganst wndblown dust, splashng and hose drected water, and protecton aganst corroson. Control Power, Voltage and CT Inputs Fused Dsconnect Meter Fusng NEMA Front Vew, Door Open, Pre-Wred and Tested Gateway Power Supply Neutral, Ground and Input/Output (not shown) Termnal Blocks CT Shortng Termnal Block Pre-Wred Control Power Transformer Fused Dsconnect 0 Control Power, Voltage, CT and Communcatons Inputs Meter Fusng PX Gateway Fused Control Power Transformer NEMA R Sngle Unt Closed and Open NEMA Mult Unt Vew, Door Open, Pre-Wred and Tested Fused Dsconnect Meter Fusng Ground CT Shortng Blocks NEMA X Sngle Unt Closed and Open Dsplay Prewred Control Power Transformer Meter Control Power, Voltage and CT Inputs 0 CT Shortng Termnal Blocks NEMA Sngle-Unt Enclosed Meter Insde Vew, PXM 000/000/000 Seres For more nformaton, vst: CA0000E

95 November 0 Sheet 00 Accessores Sngle and Mult Unt Enclosed Meters.- Meter Fusng Gateway Power Supply Fused Dsconnect PX Gateway Flex Center Eaton s Meter Flex Center can provde above and beyond the standard meter enclosure offerngs. The Meter Flex Center can talor the enclosed soluton to meet the specfcaton requrements. Specal requrements wthn the enclosures can be sze, number of meters, dfferng meter models, specal communcaton equpment, unnterruptble power supples, electrc heaters, power receptacles, or any other custom need. Below s an example of just a few of the Meter Flex Center capabltes. Lftng Rngs Control Power, Voltage Current Sensor and Communcato ns Inputs PXM 000 Power Meters -Inch Color Touchscreen NEMA Enclosure (0H x W x D Inches) Meter Fusng Current Sensor Termnal Strp Mult-Unt Enclosed Meter, Insde Vew of IQ M Fused Dsconnect Fuses PXMP Meter Modules (shown but sold separately) Enclosed Power Xpert Mult-Pont Meter PXMP Power Supply PXMP Meter Base Connectons PXMP Meter Base -Inch Meter Harness Fused Dsconnect Optonal CPT CT Shortng Block Prewred Meter Backpan, Sngle Unt Prewred panel to save nstallaton tme and cost for retrofts nto exstng equpment Desgned for Eaton s: IQ 00 Meter Seres 0/0 Power Xpert Meter 000 Seres Wth or wthout CPT, dependng on voltage Order meters separately Communcatons Connectons for Other Meters PXG-00E Communcatons Gateway Swtch for PXM 000 Control Power Transformer Sngle-Pole Touchsafe Fuse Block Removable Covers for Future Meters CT Shortng Blocks NEMA Meter Enclosure wth PXM 000 Front Vew and Door Open Groundng Bar Fuses ELC-PS0 Vdc Power Supply Sngle-Pole Touchsafe Fuse Holder Incomng Lne Crcut Protector Duplex Receptacle 0 0 CA0000E For more nformaton, vst:

96 .- Accessores Sngle and Mult Unt Enclosed Meters November 0 Sheet Techncal Data and Specfcatons Table.-. Enclosed Meters Descrpton Specfcaton Enclosure ratng Enclosure operatng temperature NEMA, R, X 0ºC to 0 C Note: Temperature range of meter s 0ºC to 0ºC. If appled outsde, proper precautons should be taken to avod exceedng the maxmum and mnmum temperature ratngs of the meter. Dmensons Sngle unt (IQ 0/0/0 and PXM 000): NEMA (.00W x.0h x 0.0D nches), NEMA R/X (.00W x.0h x.0d nches) Sngle unt (PXMP): NEMA /R/X (.00W x 0.00H x.00d nches) Sngle unt (PXM 000/000/000): NEMA (0.00W x.00h x.0d nches), NEMA R/X (0.0W x.00h x.0d nches) Mult unt: NEMA (.00W x 0.00H x.0d nches) NEMA R (.0W x 0.0H x.0d nches) NEMA X (.00W x 0.00H x.00d nches) Meters Sngle unt: IQ 0, IQ 0/0 and PXM 000/000/ 000/000 and PXMP models Mult unt: IQ M, IQ 0 and IQ 0/0 Communcatons Power Xpert Gateway 00E (mult unt only) Control voltage Basc model Wrng Certfcatons Source control Pre-wre Latch Optonal features 0V 00V (PXMP)power supply requred Up to 0V (IQ M/0/0/0 and PXM 000/000/ 000/000)no CPT requred Greater than 0V (IQ 0/0/0 and PXM 000) CPT requred Separate source controlno CPT requred Fusble dsconnectprmary voltage Shortng block(s) not requred for IQ M or PXMP Ground termnal block Neutral termnal block Eght-pont termnal block(s) for nput/output modules for IQ 0/0 and PXM 000 Wred for three-phase, four-wre applcatons. Three-phase, three-wre applcatonswll need to change the wrng for both the voltage and current per the wrng dagram n the meter nstructon manual. UL 0A and cul No separate source control voltage requred for applcatons below 0 Vac (except PXMP) Pre-wred current transformer, shortng termnal block(s), neutral, ground, voltage, control power, fusble dsconnect and nput/output termnal block(s) Padlockng latch provson Control power transformersngle unt: 0 VA (IQ 0/0/0 and 0 VA (PXM 000/000/ 000); mult unt: 0 VA control power supply for meter where montored voltage s 0 Vac (IQ 0/ 0/0 and PXM 000/000/000/000) Note: Specfcatons are subject to change wthout notce and represent the maxmum capabltes of the product wth all optons nstalled. Ths s not a complete feature lst. Features and functonalty may vary dependng on selected optons, frmware verson and product model. Please refer to the techncal data sheet and user manual for detaled specfcatons. Orderng Informaton Table.-. Sngle Unt Enclosed Meter Catalog Numberng System Meter Type PXM0MA0 PXM0MA PXM0MA PXM0MA0 PXM0MA PXM0MA PXM0MA0 PXM0MA PXM0MA Table.-. Enclosed PXMP Meter Catalog Numberng System Meter Type PXMP-MB PXMP-MB-AB Table.-. Mult Unt Enclosed Meter Catalog Numberng System Not avalable wth IQ M. PXM0MA0 - B IQ0MA00 IQ0MA0 IQ0MA IQ0MA00 IQ0MA0 IQ0MA IQ0MA IQ0MA PXMP-MB - B D NEMA Ratng = NEMA = NEMA R = NEMA X Meter Type IQMA IQ0MA IQ0MA00 IQ0MA00 Power Supply A = None B = 0/0 Vac C = 0 Vac D = 00 Vac CPT Opton A = 0/0 Vac (No CPT) B = 0 Vac (CPT) NEMA Ratng = NEMA = NEMA R = NEMA X Dsplay A = None D = -nch color touchscreen IQ0MA - B C Communcatons C = Includes PXG00E NEMA Ratng Number of Meters = NEMA = meters = NEMA R = NEMA X CPT Opton A = No CPT B = CPT For more nformaton, vst: CA0000E

97 November 0 Sheet 00 Dmensons n Inches (mm) Fgure.-. NEMA Sngle Unt Enclosure Accessores Sngle and Mult Unt Enclosed Meters.00 (0.) ) Rght Sde Vew Fgure.-. NEMA Mult Unt Enclosure Front Vew Rear Vew 0 CA0000E For more nformaton, vst:

98 .- Accessores Sngle and Mult Unt Enclosed Meters November 0 Sheet (0.0).00 (0.) /-Turn. (0.) Subpanel Wdth xø0..0 (.) Mountng Wdth (.) Subpanel Heght.0 (.) Mountng Heght 0. (.) 0. (.) Left Sde Vew ght Sde Vew Front Vew (Door Removed) External Rear Vew 0 Bottom Vew Fgure.-. NEMA PXM 000/000/000 Unt Enclosure.00 (0.).00 (0.) Top Vew.0 (.) Door 0.00 (.0). (.) HMI Cutout. (.) Left Sde Vew Front Vew. (00.) Door Rght Sde Vew Front Vew (Door Removed) 0 Bottom Vew Fgure.-. NEMA PXMP Unt Enclosure For more nformaton, vst: CA0000E

99 November 0 Sheet 00 Accessores Sngle and Mult Unt Enclosed Meters.- Ths Drp Cap s on NEMA R On Fgure.-. NEMA R/X Sngle Unt Enclosure.0 (.) (NEMA R).00 (0.) (NEMA X) (no door) 0 Ths Drp Cap s on NEMA R Only.00 (.) (NEMA R).0 (.) (NEMA X) Fgure.-. NEMA R/X Mult Unt Enclosure Rght Sde Vew Front Vew Front Vew (no door) Rear Vew 0 CA0000E For more nformaton, vst:

100 .-0 Accessores Sngle and Mult Unt Enclosed Meters November 0 Sheet (.) Top Wdth 0.00 (0.0) Enclosure Wdth.00 (0.) Enclosure Depth Top Vew.0 (.0) Top Depth xø0..0 (.) Mountng Wdth. (.).00 (0.).00 (.) Mountng Heght Front Vew (Door Removed) Left Sde Vew Front Vew. (.) Door Rght Sde Vew Turn lockng ch External Rear Vew.0 (.) 0 Bottom Vew Fgure.-0. NEMA R PXM 000/000/000 Unt Enclosure 0.00 (0.0) Front Vew (Subpanel Only).00 (0.) /-Turn Padlockng.0 (.) Mountng Wdth.00 (0.).0 (.) Mountng Heght 0. (.) (.) xø0. Left Sde Vew Fron Rght Sde Vew External Rear Vew 0 Bottom Vew Fgure.-. NEMA X PXM 000/000/000 Unt Enclosure For more nformaton, vst: CA0000E

101 November 0 Sheet 00 Accessores Sngle and Mult Unt Enclosed Meters.-.00 (0.).00 (0.) Top Vew. (.) 0.00 (.0) Enclosure 0.0 (.) Overall. (.) HMI Cutout Left Sde Vew Front Vew. (00.) Door Rght Sde Vew Front Vew (Door Removed) Front Vew (Door Removed) Bottom Vew Fgure.-. NEMA R PXMP Mult Unt Enclosure 0.00 (0.).00 (0.) Top Vew. (.) 0.00 (.0) Enclosure 0.00 (.0) Overall. (.) HMI Cutout Left Sde Vew.0 (.0) Overall Front Vew. (00.) Door Rght Sde Vew Front Vew (Door Removed) Front Vew (Door Removed) 0 Bottom Vew Fgure.-. NEMA X PXMP Mult Unt Enclosure CA0000E For more nformaton, vst:

102 .- Accessores Sngle and Mult Unt Enclosed Meters November 0 Sheet 00 Wrng Dagrams 0 Fgure Vac, 0/0 Hz, Three-Phase, Four-Wre System wth Mult Unt IQ M Meters 0 Fgure Vac, 0/0 Hz, Three-Phase, Four-Wre System wth Mult Unt IQ 0/0/0 Meters For more nformaton, vst: CA0000E

103 November 0 Sheet 00 Accessores Sngle and Mult Unt Enclosed Meters.- Fgure.-. 0 Vac, 0/0 Hz, Three-Phase, Four-Wre System wth Mult Unt IQ 0/0/0 Meters 0 0 Fgure Vac, 0/0 Hz, Sngle-Phase, Three-Wre System wth Sngle PXMP Meter CA0000E For more nformaton, vst:

104 .- Accessores Sngle and Mult Unt Enclosed Meters November 0 Sheet 00 0 Fgure Vac, 0/0 Hz, Three-Phase, Four-Wre Wye System wth Sngle PXMP Meter 0 Fgure Vac, 0/0 Hz, Three-Phase, Four-Wre Wye System wth Sngle PXMP Meter For more nformaton, vst: CA0000E

105 November 0 Sheet 00 Accessores Sngle and Mult Unt Enclosed Meters.- Fgure Vac, 0/0 Hz, Three-Phase, Four-Wre System wth Sngle Unt IQ 0/0/0 or PXM 000 Meter 0 0 Fgure.-. 0 Vac, 0/0 Hz, Three-Phase, Four-Wre System wth Sngle Unt IQ 0/0/0 or PXM 000 Meter CA0000E For more nformaton, vst:

106 .- Accessores Sngle and Mult Unt Enclosed Meters November 0 Sheet 00 0 Fgure Vac, 0/0 Hz, Three-Phase, Four-Wre System wth Sngle Unt PXM 000/000/000 Meter 0 Fgure.-. 0 Vac, 0/0 Hz, Three-Phase, Four-Wre System wth Sngle Unt PXM 000/000/000 Meter For more nformaton, vst: CA0000E

107 November 0 Sheet 00 Accessores Current Transformers.- Current Transformers Current Transformers General Descrpton Eaton s low voltage current transformers are avalable n both sold core and splt core desgns. Engneered for electronc meterng applcatons, all sold core desgns and selected splt core desgns offer ANSI meterng qualty accuracy. The sold core desgns also meet ANSI C. relay accuracy requrements ncludng over-rangng capabltes. The current transformer offerng has a A secondary at the rated prmary current. Splt core CTs are specfcally desgned to be nstalled around prmary conductors wthout dsconnectng wres or breakng the crcut to be montored. These current transformers are perfect solutons for energy management applcatons and are manufactured for nstallaton ease. Applcaton Descrpton For new constructon and retroft applcatons where no current transformer exsts, Eaton offers a complete selecton of low voltage (up to 00V) current transformers. These current transformers can be used n commercal grade applcatons such as control panels and panelboards. Addtonally, they can be used for most ndustral meterng and relayng applcatons n swtchboards, swtchgear and motor control centers. Note: Not for use wth IQ M or IQ MESII. Product Selecton Table.-. Sold Core ANSI Meterng Accuracy Prmary Current Ratng ANSI B0. Meterng Class at 0 Hz (Accuracy n %) Wndow Sze n Inches (mm) Dameter Catalog Number 0.. (.) S00-0 S00-0 S00-0 S00-0 S00- S00-0 S00-0 S (.) S00-00 S00-0 S00- S (.) S00-0 S00-0 S00-0 S00- S00-0 S00-0 S (0.0) S00-0 S00-0 S00- S00-0 S00-0 S00- S00- S00- S00-0 S00- S (0.) S0-0 S0- S0-0 S0-0 S0- S0- S0- S0-0 S0- S0-0 S0- S Wound Prmary W0-0 W0-00 Table.-0. Splt Core ANSI Meterng Accuracy Prmary Current Ratng ANSI B0. Meterng Class at 0 Hz (Accuracy n %) Wndow Sze n Inches (mm).00 x.0 (0. x.) Catalog Number M000-0 M000-0 M000-0 M000-0 M000-0 M000- M000- M000- M000-0 Table.-. Splt Core Current Transformers Prmary Current Ratng Accuracy at 0 Hz (n %) x.0 (0. x 0.) Wndow Sze n Inches (mm) 0.0 x. (0. x.). x. (. x.).0.0 x. (.0 x.).0.0 x. (.0 x.) M00-0 M00- M00-0 M00-0 M00- M00- M00-0 M00- M00-0 M00- M00-0 Catalog Number M00-0 M00- M00-0 M00-0 M00-0 M00-0 M00- M00-0 M00-0 M00-0 M00-0 M00-0 M00-0 M00-0 M00-0 M00- M00-0 M00-0 M00- M00-0 M00-0 M00-0 M00-0 M00- M00- M00- M00-0 M00- M CA0000E For more nformaton, vst: