(FW Version )

Transcription

1 (FW Verson )

2 Table of Contents WHAT S NEW INTRODUCTION Welcome Gettng Started IP Address Settng USING A WEB BROWSER ActveX Installaton (AxUMF.cab) Recommended PC Specfcaton LIVE Log In Lve Page Menus SEARCH SETUP Basc Confguraton Users TCP/IP Date and Tme Stream Focus Assst Vdeo and Audo Camera (channel namng/vdeo format/ color control) Repostonng Zoom/Focus Burnt-n Text Encoder profle Stream Prvacy Mask Vdeo-Out Event Confguraton Event Rules Moton Detecton Face Detecton A 2

3 Network Loss Heart beat Schedule E-mal recpent FTP Notfcaton HTTP Notfcaton TCP Notfcaton TCP Server Multcast Notfcaton Network Confguraton TCP/IP (DHCP, Statc IP, DNS settng) Web Server NTP Server UPnP RTSP/RTP (multcast or uncast) RTMP mdns (Multcast DNS) WS-Dscovery SMTP DDNS (Dynamc DNS) SNMP Wreless LAN IP Flterng Hosted Servce Storage SD FTP Recordng Contnuous VCA Perpheral Sensor/Alarm PIR Seral Port PTZ settngs PTZ A 3

4 Tourng Autorun Protocols Mantenance Users Date & Tme API Language Frmware Upgrade System Log Confguraton Import/Export Reset All Settngs Reboot Actvaton About Informaton Lcense APPENDIX(A) : ENCODERS Lve PTZ Control Setup Vdeo-In Encoder Profle Vdeo-Out Informaton REVISION HISTORY A 4

5 WHAT S NEW V Added : Checkboxes of Vdeo and Audo under the stream tab n Lve Page Face Detecton (Setup > Event Confguraton > Face Detecton) SRTP n the RTSP/RTP confguraton (Setup > Network Confguraton) Maxmum btrate n VBR (Setup > Vdeo&Audo > Stream) Confguraton of Mnmum shutter speed for the Auto mode n the exposure confguraton wth the name of Max exposure tme Defog feature n the Image Sgnal Processng confguraton (Setup > Vdeo&Audo > Camera) Selectons of Indoor and Outdoor n the Whte Balance confguraton (Setup > Vdeo&Audo >Camera) RTMP n Network Confguraton Opton to encode emal contents n HTML (Setup > Event Confguraton > E-Mal Recpent) Feature to convert VCA event to MD event under VCA source (Setup > Event Confguraton > Event Rules > Event Sources) Storage error as an event source (Setup > Event Confguraton > Event Rules > Event Sources) Attach thumbnal (or face mage) as the selecton for the event actons of Recordng, Send e-mal notfcaton, and Upload notfcaton to FTP (Setup > Event Confguraton > Event Rules) VCA meta and MD meta as the optons for recordng resource (Setup > Storage > Recordng) dgtal zoom on Lve page Change : Max. value of segmentaton sze modfed from 4000 to 2000 (Lve > Vdeo Control > Settng > Local Recordng) Name changed from Rule of Segmentaton to Maxmum fle sze/duraton (Lve > Vdeo Control > Settng > Local Recordng) Button name, Prevew modfed to Vew Name Maxmum shutter speed modfed to Mn exposure tme Page of Search & Download (Storage > Search & Download) separated nto two dfferent pages (Search page only for event recordng ; Contnuous page only for contnuous recordng) ; Event Search merged to the System Log page ) Removed : Moton nterval n the Moton Detecton confguraton (Setup > Event Confguraton > Event Rules) Event source, Fan/Heater Operaton Changed removed A 5

6 1. INTRODUCTION 1.1. Welcome Ths manual explans how to nterface wth the H.264 codec supportng IP camera seres usng the Mcrosoft Internet Explorer web browser. The Web Page of the product has been mplemented wth the protocols below: HTTP API Parameter confguraton commands RTP/RTSP Vdeo, Audo, and Metadata Streamng Actve X program Image dsplay on clent PC 1.2. Gettng Started Before utlzng the web nterface, nstall and connect the camera and other physcal devces. Refer to the hardware manual suppled for the product nstallaton steps. The nstallaton manual provdes detaled nformaton for nstallaton and confguraton of the devce IP Address Settng How to fnd the IP Address of your devce: The product has ts unque IP address, and users can dentfy the address by convertng the MAC address last two dgts of hexadecmal numbers descrbed on the stcker that s attached to the devce. Refer to the followng fgure, and convert the MAC address to an IP address. Type the dentfed IP address n the address bar of the Internet Explorer to access the web page of the product. MAC address = 00-1C-B IP address = Convert the last two sets of hexadecmal numbers to decmal numbers A 6

7 How to change the default IP address: IPAdmnTool software allows users to search and change the IP address of connected devces. The fgure below shows a man UI of the IPAdmnTool. The IPAdmnTool helps to search multple devces. Please refer to the IPAdmnTool User s Manual.pdf for the detaled nformaton and ts usage. What s IPAdmnTool? IPAdmnTool automatcally scans all of the products ncludng encoders and cameras on the network and dsplays product s nformaton, ncludng product name, IP address, MAC address, frmware nformaton, and devces uptme. The tool also allows users to change the IP address or update the frmware. It s hghly recommended for users to revew before usng ths tool for better understandng the software functons and admnstraton controls. Lmtaton of the concurrent clents Dependng on streamng confguratons and settngs, smultaneous connectons mght reach the lmtaton due to system maxed-out capablty. RTSP Streamng, Uncast: Heavly depends on the maxmum throughput n a gven tme A 7

8 2. USING A WEB BROWSER After the network and power connecton are establshed, access the web browser to vew the lve streamng of the connected devce. Installaton of the ActveX s requred to see the lve page and to access full controls n Mcrosoft Internet Explorer ActveX Installaton (AxUMF.cab) For full control of a devce through a web browser, nstallaton of the ActveX control s requred. Refer to the followng steps to nstall the ActveX. Dsable the Pop-up blocker or run Add-on notce n a browser to nstall the ActveX and Installaton fle. 1. Clck the nstallaton warnng message on the vew page as below. JPEG snapshot s dsplayed every 1 second before you nstall AxUMF.cab 2. Clck the Install button on the securty warnng message box. If the page s not respondng after the nstallaton, refresh the page. 3. Install setup.exe by clckng the lnk shown on the man page. JPEG snapshot s dsplayed every 1 second before you nstall setup.exe A 8

9 4. Follow the nstructons of the dalog boxes, and complete the nstallaton. 5. When the dalog box appears to request user name and password, enter the default value for the admnstrator account (case-senstve) as below: User Name: root Password: pass 6. Refresh the page and check f the lve mage s dsplayed successfully. If ActveX s not run properly, please make sure all of your software components are up to date:.net Framework V3.5 Mcrosoft Vsual C SP1 Redstrbutable Package (x86) A 9

10 2.2. Recommended PC Specfcaton The followng table descrbes the recommended requrement of the PC system to use a Web browser wth our products. Item VGA D3D support OS Vsta, 7, 8 Drect X 9.0 Recommended Only Internet Explorer 9 or hgher verson x86 s offcally supported A 10

11 3. LIVE When the devce s accessed va the web browser, the lve mage of the devce appears on the wndow. To go back to the Lve page ether from the Storage or Setup page, clck Lve on the upper left corner of the web page Log In To access the devce on the web browser: 1. Enter root for the user name and pass for the password on the pop-up wndow. 2. Clck the OK to access the man page A 11

12 3.2. Lve Page Menus Panel Clckng the Panel button enables users to hde/show the menu tabs. The menu tab bascally conssts of the Opton tab and the Status tab. Addtonasl tabs wll appear dependng on the devce type, and the addtonal tabs wll be ntroduced at the end of Lve Vew Page Menus ntroducton. Opton Tab Stream: The drop-down box dsplays avalable streams of the camera for users to select from. The checkboxes of Vdeo and Audo (for the audo supported devces) under the dropdown box enable users to select only the wanted source to be ncluded on the stream. There s no UDP stream type supported for IPv6 network. Sze: Users may select the sze of mage that s dsplayed on a web page. - Ft: Image sze s reduced / enlarged to ft nto the current web wndow. - 25%: Image sze s reduced to a quarter of orgnal resoluton. - 50%: Image sze s reduced to a half of orgnal resoluton. - 75%: Image sze s reduced to three quarters of orgnal resoluton %: Image sze s dsplayed as ts orgnal resoluton sze %: Image sze s 50% more enlarged than ts orgnal resoluton sze. - Full: The mage s shown on a full screen mode. Trgger-Alarm(DO): Users may enable or dsable the alarm. Settng up the alarm from the settng menu s requred. (Setup > Perpheral > DI/DO) Audo: - Speaker :Speaker wll be actvated when Audo Input (Setup > Stream > Audo) and audo stream (Setup > Network Confguraton > RTSP/RTP) are tcked. There s a slde bar to adjust the speaker volume. - Mcrophone :Mcrophone wll be actvated when the Audo Output (Setup > Stream > Audo) s tcked A 12

13 Vdeo Control: Users can readly record or take a snapshot of the lve mage n a local storage whle montorng the lve mage. - Record/Stop: Clck the Record button to record the current scene of the lve mage as an AVI fle, and clck the Stop button when you need to stop recordng. - Snapshot: Clck the Snapshot button to take a snapshot of the current scene. - Pause/Resume: Clck the Pause button when you need to observe a fast movng scene n the lve mage, and you can also take a snapshot of the paused scene. Clck the Resume button f you want to see the lve mage agan. - Settng: Users can confgure the settngs of recordng and snapshot. The operaton of Vdeo control requres Internet Explorer to access the clent system. If a message box of User Account Control asks you to make changes on your computer, clck Yes to allow the control. Vdeo Control cannot be supported n any browser other than Internet Explorer. Turn off the pop-up blocker on the Lve page. Clckng the Settng button wll brng up the Recordng/Snapshot Confguraton page. Clckng the Settng button wll make the Recordng/Snapshot Confguraton page popped up. Local Recordng: - Save Path : Select a local path to save recordngs of Lve Page. - Prefx of flename: You can change the prefx of the fle name. - Recordng resource: Select ether Vdeo only or Audo+Vdeo accordng to your ntenton. - Rule of segmentaton: You can set a segmentaton rule to lmt a fle sze. (by) Sze: The range of the fle sze s from 10 to 4000 Megabyte(s). (by) Tme: The range of the recordng length s from 10 to 3600 seconds or from 1 to 3600 mnutes. Snapshot - Save Path: Select a local path to save snapshots of Lve Page. - Prefx of flename: You can change the prefx of the fle name. Dgtal Zoom A 13

14 After the nstallaton of Actve X, you can dgtally zoom the lve screen wth your mouse. Zoom: movng the mouse wheel to the upward drecton on lve screen wll enable dgtal zoom. Once the lve vew s zoomed, you can see any spot wthn the camera s feld of vew by movng your mouse. The room rato wll be ndcated at the upper rght hand corner of the screen, and where the currently zoomed spot s wthn the camera s feld of vew wll be ndcated wthn the rectangle appearng at the bottom rght hand corner of the screen A 14

15 Status Tab - System : Shows Usage of CPU and memory. - Tme: Tme after bootng. - Frst Stream/Second Stream/Snapshot: current status of each encoder. It shows nternal encoder status, not streamng status. - RTSP Connect Lst : shows all IP addresses currently accessng the webpage. If the lve mage s not shown, 1. Check f the camera s powered on and connected properly. 2. When usng the Internet Explorer, check f the ActveX control s nstalled. For other types of web browsers, the lve mage s dsplayed va QuckTme Player A 15

16 PTZ Tab PTZ Tab s shown f the model supports PTZ operaton or t s Speed PTZ camera. Movement: The arrow buttons can enable users to move Pan/Tlt. -Zoom In/Out: Clck + button to zoom n (Tele) and - button to zoom out (Wde). -Focus Near/Far: Clck + button to focus n near and - button to focus n far. Speed: Adjust the speed of the pan/tlt control. Pre Poston: Users can preset varous postons by numberng dfferent spots of space. The maxmum number of postons that user can set are 255. Clckng GO after a preset number was selected from the drop-down lst wll show the correspondng poston. Tour: Tour shows the vdeo stream from the dfferent preposton n a pre-defned order for ntervals. Select the Tourng Number and then clck the Start button to start the predefned Tourng. If you want to stop Tourng mmedately, Clck Stop button. Please refer to Tourng for the confguraton. Home Poston: One poston can be set as the Home poston whch s readly accessble by just clckng Go or goes to when there s no operaton wth Autorun. Please refer to Autorun for the confguraton. Wper : Ths only appear when the camera type s IR speed PTZ. Ths s located below the Home Poston confguraton. If the lens surface needs to be wped, clck the Start button. After wpng s done, clck the Stop button A 16

17 Unwarpng Tab Unwarpng Tab wll appear only for the camera models supported wth unwarpng functon. Installaton Place : User can select nstallaton mode here. - Celng : Select t when camera s nstalled on the celng. - Wall : Select t when camera s nstalled on the wall. - Ground : Select t when camera s nstalled on the ground. Vew Type : User can choose type of lve screen vew. - Sngle : Dsplay the default 1 vew. - Quad : Dsplay dvded vew of 4. - Panorama : Dsplay 2 vews up and down. Default Poston : Clck the Set button to return to the default poston from the current vew A 17

18 4. SEARCH To search for the recordngs for events, clck Search. 1 st table 2 nd table 3 rd table Playback (1 st table) A recorded fle that a user specfes on the 4rd table can be replayed here. - Slder Bar : It dsplays the progress of playng vdeo. However, the progress cannot be manually controlled on slder bar. NOTE: the slder bar appears only n IE browser. - Control Buttons : It dsplays the progress of playng vdeo. However, the progress cannot be : Play : Pause : Stop : Download the snapshot. The save path s the same as the one confgured at Lve > Panel > Vdeo Control > Settng > Snapshot A 18

19 : Download the event recordng fles as an AVI fle format. The save path s the same as the one confgured at Lve > Panel > Vdeo Control > Settng > Snapshot. : Dsplay the full screen shot. Only IE browser supports ths functon. - Automatc playback next fle : Selectng ths checkbox wll enable automatc playback of all fles startng from the selected one to the latest one n a row (t s supported only n IE browser). - Mute Audo : User can remove audo by selectng ths opton (t s supported only n IE browser). Search Condton (2 nd table) - Event source : There are the checkboxes of all avalable event sources for defnng the fle search condton. Users can select or deselect certan event sources to narrow the condtons to search for specfc event. - Date : Select the specfc date by usng the arrow buttons or the pop-up calendar to narrow the correspondng fles to the selected event sources. - Tme Lne : It helps you dentfy hat tme of the day has events and lets you playback the recorded vdeo by clckng each sngle bar for each recordng. NOTE: To dstngush each bar from clusters, enlarge the tme lne by rollng your mouse wheel upward. Search Result (3 rd table) - Thumbnal (Face Image) : Thumbnal or face amge (n case of face detecton event) wll appear wth the event name and the event tme. If Attached thumbnal (or face mage) s not selected for recordng, no mage wll be shown. - Event Name /Event Tme : The name of an event and the event occurrng tme wll appear. - Control Buttons / : These two buttons work the same as the ones of the same shapes on 1 st table for playback. : Clckng ths con wll dsplay the detals of the event ncludng the duraton of the recordng A 19

20 5. SETUP To confgure the settng values of the devce, clck Setup on the man page. To access the Setup page, ID and passwords are requred Basc Confguraton The Basc Confguraton provdes the menus requred for the basc settngs that users must confgure after the camera nstallaton Users Refer to Users to get nformaton on how to add, modfy, or remove the web page users TCP/IP Refer to Settng TCP/IP (DHCP, Statc IP, DNS settng) for TCP/IP confguraton Date and Tme Refer to Date & Tme for tme and date settng Stream The Stream confguraton page from Setup > Basc Confguraton > Stream operates the same way as of the page from Setup > Vdeo & Audo > Stream. Refer to Stream for the detals A 20

21 Focus Assst Focus Assst s a vsble gudelne to adjust focus more easly than when attemptng the adjustment wth bare eyes. The feature of Focus Assst on the camera s webpage s found at Setup > Basc Confguraton > Focus Assst. How Focus Assst Work Clckng the start button dsplays the graph formed wth a seres of yellow bars wth the hghest focus value and the current focus value lke n the above mage, whch ndcates the degrees of how much precse the focus s durng the movements of focus rng so that users can get a sense of better focus. Start : Ths button ntates dsplayng the graph and the focus values. Stop : It stops dsplayng the graph and the focus value. Vew : The button dsplays Lve Vew. Pop-up : Clck ths button opens a pop-up wndow of Lve Vew A 21

22 5.2. Vdeo and Audo To change the settng for vdeo nput, burnt-n text, encoder profle, stream, and prvacy mask, go to the Vdeo (& Audo) page by selectng Setup > Vdeo (& Audo). Ths menu s confgured wth the followng sub menus : Camera, Repostonng(dependng on the devce type), Burnt-n Text, Encoder Profle, Stream and Prvacy Mask Camera (channel namng/vdeo format/ color control) The camera settng page provdes optons to: Name a channel for the camera Set mage attrbutes Adjust the mage exposure Confgure Day & Nght mode Confgure the mage sgnal processng Prevew the current settng Rotate mage Stablze the mage 1. Adjust the camera settngs based on the nstructons for each component on the followng pages, and clck the Apply button to save changes. 2. Clck the Vew button to see how the mage wll appear on the Vew wndow. Or, clck the Pop-Up button to have a separate pop-up wndow to prevew the mage. General - Frendly name : The users may provde frendly name (alas) to an ndvdual devce n case when utlzng multple channels and devces. Usng alas s recommended to dstngush the devce where envronment requres multple mage feedbacks wth multple montorng devces. - Aspect Rato : There are two modes respectvely of 4:3 and 16:9. The 4:3 mode s avalable n all the products except for encoders. Vdeo Appearance - Brghtness : The range s from 0 to 255, the default s Contrast : The range s from 0 to 255, the default s Saturaton : The range s from 0 to 255, the default s Sharpness : The range s from 0 to 255, the default s 160. Sharpness s affected by nstallaton envronment. Here n the web menu s range defnton s operatng range, therefore confgurng the rght value for each camera s necessary A 22

23 Vdeo Transform Orentaton - Vertcal Flp : Ths enables an mage to be rotated vertcally. - Horzontal mrror : Ths enables an mage to be mrrored. Rotaton Image rotaton s a corrdor mode whch rotates the vdeo mage 90 degrees n an area that s more vertcal than horzontal n shape such as starcase, hallways, asles to vew a vertcally orented vdeo stream. The optons are None, Left(-90 degrees), and Rght(+90 degrees). Exposure Image rotaton s not supported for the product types below. Repostonng cameras / PTZ camera s/ Vdeo Encoders Image rotaton usng hgh resoluton (1080p) may affect the frame rate. Image rotaton cannot be used whle any of the features below s actvated. -Vdeo Stablzaton -VCA Exposure mode Selectng the rght exposure control mode depends on the nstallaton ste s envronment. Three modes are avalable; - Auto : Ths mode tres to adjust the shutter speed automatcally dependng on the lght condton wthn the range from the user confgured max exposure tme (mnmum shutter speed) to the user confgured mn exposure tme(maxmum shutter speed). Otherwse, the shutter speed wll vary wthn the camera s default values. - Manual : If the auto mode doesn t work properly or you want to fx the shutter speed, you may set the shutter speed manually A 23

24 - Flckerless : Flcker may occur under florescent lghts. Then, select a proper lght frequency to compensate the lght flckerng. Maxmum AGC Set the maxmum value from 0 to 100 accordng to your decson. *AGC(Auto Gan Control) It mantans approprate exposure on the mage by automatcally adjustng gan under low lght condton. When gan s ncreased nose and btrate are elevated as well. Thus, users may need to set the maxmum of AGC (Range 0~100) whle consderng the preventon of the excessve ncrease of nose and data sze. Exposure adjustment Correct exposure value should be selected from the lst box to adjust the target brghtness for the automatc exposure settng. The hgh value makes the mage brghter, and the low value makes the mage darker. Select the value from the followng optons : +1.0, +0.6, +0.3, 0, 0.3, 0.6, 1.0(EV) Backlght compensaton (BLC) allows the camera to adjust the exposure of the entre mage to properly expose the subject n the foreground. (In mages where a brght lght source s behnd the subject of nterest, the subject would normally appear n slhouette.) Dgtal slow shutter allows to get the proper exposure n low lght condton even the frame rate may be dropped. IR enables to adjust the IR power output dependng on the surroundng lght condtons. It also elmnates overexposure f a subject s detected closer to the camera. - ON(Smart IR) : Ths mode automatcally adjusts the pre-defned levels of the IR power output wth the range of 0 to Manual : Users can manually set a statc level of the IR power output wth the range of 0 to Off : Ths mode makes the camera s IR LEDs turned off. IR feature s avalable only for the specfc camera models equpped wth IR LEDS. Dgtal Wde Dynamc Range (DWDR) Ths ensures clarty n mage n the space affected by strong lght causng a bg contrast on the spots wthn the mage. Auto Focus Mode (: Auto focus mode s avalable for speed PTZ cameras only.) Autofocus allows the lens to reman n focus durng tele/wde movement. There are three modes. - Auto : ths mode enables to focus automatcally. - Sem-auto : Ths mode allows adjustng focus once automatcally n the below cases. PAN/TILT movement Zoom In/Out A 24

25 Change Preset poston The PTZ poston change by Autorun - Manual : Ths mode allows user to change the focus wth Focus Near/Far control. Day & Nght Three dfferent day/nght modes are supported: Auto, Day, and Nght. Select the desred mode based on the nstallaton envronment. Default value s Auto. When Auto s selected, the threshold value for Day to Nght and Nght to Day can be controlled. Please note that Nght to Day level should always be set hgher than Day to Nght level. - Day to Nght level : Ths has range of 0 ~ 63. (Default value s 1) - Nght to Day level : Ths has range of 1 ~ 64. (Default value s 3) - Refocus : Ths functon enables automatc focus when day changes to nght and vce versa. (: The refocus feature does not apper for the camera models wth fxed lens.) Whte Balance Several whte balance modes are avalable n ths opton. Select the mode approprate mode accordng to your nstallaton envronment. - atw1 : It automatcally adjusts whte balance for vdeo mages. - atw2 : t automatcally adjusts whte balance wth dfferent adjustable range when compared to atw1 mode. - push : It apples adjusted whte balance to mage. - manual : Users can manually set up red and blue hues to adjust whte balance. - Indoor : Approprate for the camera nstalled ndoors. - Outdoor : Approprate for the camera nstalled outdoors. PTZ camera models do not have the opton for atw2 and push. Image Sgnal Processng Dynamc 2D DNR When nose flter value s 0, the nose flter s off. The nose suppresson s performed to the maxmum when the value set s 15. The range s from 0 to 15, and the default s 3. The vdeo qualty wll suffer when the value s set to the hghest A 25

26 Enable defog Ths feature provdes mage wth the mproved vsblty when the mage s not clear enough due to envronmental condtons such as fog, dust, ran and etc. Enable ths mode by checkng the checkbox and selectng the rght level from the drop-down lst. Vdeo Stablzaton Vdeo Stablzaton s used to keep the mage stable aganst camera sway and other unwanted camera movement. Vdeo stablzaton can be enabled / dsabled ndependently for each ndvdual stream. In order to keep the output frames steady and algned to a reference frame, the output frames are shfted wth respect to the nput frames. As the camera moves around, the output frames are shfted to keep the mage features algned wth prevous frames. Ths results n areas for whch there s no mage data avalable. The Border In-fll opton controls what happens to those areas that do not contan any mage data. There are three optons avalable: - dynamc : The borders unformly expand and contract n real-tme n response to the amount of camera moton. - fxed : A fxed sze black border s present on all sdes whch blanks out the movng edges of the mage. The sze of the borders s equal to the maxmum frame shft. - none : Regons of the output mage for whch there s no avalable data are flled wth black. The performance of the stablzaton may be lmted due to the characterstc of mage sensor. The performance s optmzed n the frequency range of 1-5 Hz. Vde Stablzaton cannot be used whle any of the features below s actvated. - Image Rotaton - VCA - Vdeo out -Face detecton A 26

27 Repostonng : Ths part s for the repostonable dome cameras only. To change the repostonng settng, go to Setup > Vdeo & Audo > Repostonng A 27

28 Movement - Arrow buttons: The camera can move to 4 drectons; up, down, left, and rght. The camera moves to the desred poston whle the button s clcked and held. Stop button can be used whle usng zoon/focus settngs or auto focus settngs. - Zoom/Focus buttons: 3 levels of movements are avalable for wde, tele, near and far movements. Clckng the buttons move the lens more extensvely than the buttons. - One Clck Focus: Clckng ths button automatcally sets the lens focus. Pre Poston - Drop-down lst: Stored poston lst (avalable to store maxmum 16). - Name: Text box to enter name of apponted poston. - Go: Clckng Go moves the camera to the selected poston after selectng one from the drop-down lst - Set: Savng the current camera poston. - Clear: Removng the current camera poston. Calbraton - Pan/Tlt: Move Pan and Tlt to default locaton. - Zoom/Focus: Move zoom and focus to default locaton Status - Cycle(Pan)/ Cycle(Tlt): Pan and Tlt cycle status. Numbers ndcate pan and tlt motor s number of revolutons. Schedule - Set up to 4 schedules of prepostons to work durng the specfc tme of the desred days of a week A 28

29 Zoom/Focus : Zoom/Focus s for motorzed lens cameras only. To change the Zoom/Focus settng, go to Setup > Vdeo & Audo > Zoom/Focus - Zoom/Focus: Three levels of movements are avalable as wde, tele, near and far. Clckng the buttons move the lens more extensvely than the buttons. - One Clck Focus: Clckng ths button automatcally sets the lens focus. - Calbrate (Zoom/Focus): Ths functon rectfes msalgnment by rebootng to a zero pont and then algnng to a correct poston A 29

30 Burnt-n Text To change the burnt-n text settng, go to Setup > Vdeo & Audo > Burnt-n Text. The settng of the Burnt-n Text s appled to frst stream, second stream (f the devce supports) and snapshot modes dentcally. To add burnt-n text, check on the box of Enable B-I Text after the settng and clck Apply What s Burnt-n Text? Burnt-n Texts burns nformaton nto streamng vsuals before t gets compressed, thus prohbtng manpulaton or alteraton of the events tme. It allows the fle to become relable evdence as t dscourages ntentonal manpulaton of the date and tme for an alb. Text confguraton Select nformaton (Date, tme and name) to nclude as the burnt-n text n mage. To nclude a specfc name or nfo, type the desred text on the name text box. To dsplay mllsecond (tme), check the Enable mllseconds for tme dsplay checkbox. Text poston Set where the burnt-n text wll be postoned n mage. Predefned locatons are provded as well as manual poston optons. It s recommended to use normalzed X, Y nstead of predefned postons (left-top, left-bottom, rght-top, rght-bottom) for the burnt-n text postons. Selectng same predefned postons on all three categores may cause overlappng texts, dependng on mage resoluton or the poston of each text. Utlzng vew wndow or pop-up wndow s hghly encouraged to revew the selected postons of those burnt-n texts. Vew Prevew button allows to vew the vsual wth appled settngs (need to press APPLY to vew). Pop-up Pop-up button allows to vew the vsual wth appled settngs on pop-up wndow A 30

31 Encoder profle To create pre-defned encoder profles, go to Setup > Vdeo & Audo > Encoder Profle. Stream Profle Lst: It shows a lst of defned encoder profles. Clckng a hghlghted profle shows the detaled nformaton about the profle. - Add : Clck Add to create a new profle - Copy : Clck Copy to easly create a duplcated profle. - Modfy : If you want to modfy a currently exstng profle, clck Modfy, and make changes on the exstng settng. - Remove : Clckng Remove gets rd of the hghlghted profle on the lst, but the default profle cannot be removed. If you clck ether one of Add, Copy, or Modfy button, the profle confguraton page appears as shown below. On ths page, users can name the profle, add descrpton and confgure the settngs for each stream, snapshot and audo separately A 31

32 Users can confgure streams, snapshot and audo settngs. Clck OK to apply all changes to the current profle, or clck Cancel to go back to the last saved profle. Stream Confguraton (Frst Stream and Second Stream) The expected codec usage The expected codec usage s calculated automatcally accordng to your confguraton parameters. Do not exceed the usage over 100%. * The expected codec usage does not appear for encoders. Enable streamng Check the Enable streamng box to enable streamng on the selected stream. Always keep unused streams dsabled. Vdeo codec Select the vdeo codec from MJPEG and H A 32

33 Resoluton The supported resoluton n pxels for the current stream profle s lsted on the drop down box. Select the desred resoluton. For encoders, refer to APPENDIX[A]:ENCODERS. 16:9 mode 4:3 mode 4:3 mode for Fsheye camera 1920x1080 * 1280x720 * 1120x630 * 960x x x x x180 SXGA(1280x960) XGA(1024x768) SVGA(800x600) PAL (720x576) NTSC(720x480) VGA(640x480) QVGA(320x240) QXGA(2048x1536) UXGA(1600x1200) SXGA(1280x960) XGA(1024x768) SVGA(800x600) PAL (720x576) NTSC(720x480) VGA(640x480) QVGA(320x240) 4:3 mode s supported n all the products except for encoders. The three resolutons wth the astersk above are appled mutually exclusvely between the frst stream and the second stream. If the resoluton 1920x1080 s appled to the frst stream, the second stream can take the same resoluton 1920x1080 but cannot take the ether 1280x720 or 1120x630. For decent mage qualty, the recommended btrate range for the two resolutons, 1920x1080 and 1280x720 are as follows f the maxmum frame rate s x x720 Mn : 1.5Mbps, Max : 6Mbps Mn : 1Mbps, Max : 4Mbps *f the settng values for the frame per second drop, the recommended btrate range wll also comparatvely drop. Maxmum FPS Defne the desred frame rate per second. The max frame rate s 30 for cameras. For encoders, refer to APPENDIX[A]:ENCODERS. GOP Ths parameter defnes the length of the group of pctures. If ths value s set to 1, the vdeo stream wll only have one I-frame. Keep ths value hgh to mnmze bandwdth. The max GOP s 30. For encoders, refer to APPENDIX[A]:ENCODERS. Profle Identfcaton Ths opton allows users to select between three H.264 dfferent profles. Ths drectly affects the qualty of the vdeo due to the amount of compresson appled. Baselne profle provdes maxmum compresson to the vdeo. Hgh profle gves the best qualty. Selectng the Man profle s balances between the other two A 33

34 Bt Rate Control - Varable Bt Rate (VBR) VBR allows a hgher btrate (and therefore more storage space) to be allocated to the more complex segments of meda fles whle less space s allocated to less complex segments. It s used when the system has enough storage and a hgh qualty mage s requred. However, there s a lmt, Maxmum btrate to be confgured to control the CPU usage. Image qualty can be confgured as hghest, hgh, normal, low and lowest. - Constant Bt Rate (CBR) CBR mode mantans the defned btrate level all the tme. Snapshot Confguraton Once Enable snapshot s tcked, t wll not stop untl the checkbox s unchecked and Apply s pressed. Enable snapshot Tck Enable snapshot to enable snapshot on the selected stream. Resoluton The supported resoluton for the product s lsted on the drop down box. Select the desred resoluton. If one of the vdeo streams s set to 1080P, other vdeo stream resoluton cannot be used as greater than 1088 horzontal. Maxmum FPS Enter how many snapshot fles you want to send per a second. The maxmum value s 5. JPEG qualty Enter the JPEG qualty. The range s from 0 to 100 and 100 means the best qualty. Audo Confguraton Enable audo Select the Enable check box for the mcrophone or speaker to be enabled. Audo Input Volume: Enter the audo nput volume. The avalable range s from 0 to 225. Codec: G.711 s supported for the audo codec. Samplng Frequency: The samplng frequency s selectable between 8kHz and 16kHz. Audo Output Volume: Enter the audo output volume. The avalable range s from 0 to 255. TCP/IP lsten port: Set the port for lstenng to the audo receved from the camera. The default s 6000 and the range s from 1 to After the settng, make sure to clck OK to save changes A 34

35 Stream To confgure predefned stream profle, go to Setup > Vdeo&Audo > Stream. Ths part has the same structure as n Setup > Encoder Profle, and actual stream s appled on ths page. Clckng Show profle lst wll dsplay all the profles that you had prevously added n Encoder profle. 1. Hghlght a profle that you wsh to confgure from the lst, and clck Load profle settngs to brng up ts settng below the Stream panel. 2. Clck Apply to mplement all changes to the currently loaded profle. Or, clck Cancel to reverse all the changes made on ths page to the latest-appled values. *Dfferent values for streamng can be appled by drectly changng the values below the Stream panel other than settng profles thru Encoder Profle. If the rotaton opton s set up n Setup>Vdeo&Audo>Camera, t wll dsplay +50% codec usages A 35

36 Prvacy Mask To set up the prvacy mask, go to Setup > Vdeo & Audo > Prvacy Mask. How to confgure prvacy mask zones except repostonng camera 1. Check Show button of the desred prvacy zone ID on the nformaton panel. 2. On the dsplay wndow, clck the left mouse button and drag the mouse dagonally untl the desred sze s made. 3. Clck the Save button to save changes A 36

37 repostonng camera 1. Move to the area where prvacy mask s needed by clckng the arrow buttons under the Movement tab. 2. Tck the checkbox of a desred Zone ID, type an easly recognzable name under the name tab, and set the mask poston and sze by enterng approprate values under the Poston tab based on Center and Range nformaton. 3. Clck SAVE to apply the prvacy mask on the screen. 4. Adjust and resze the prvacy mask to completely cover the object you targeted by changng the values you had entered. If you want to see each prvacy mask you already set n dfferent areas on the screen, clck GO. What are P,T,W, and H? P means Pan, ndcatng the camera s pannng poston. The value s from 0 to 360. T means Tlt, ndcatng the camera s tltng poston. The value s from -25 to 70. W means Wdth, ndcatng the wdth of prvacy mask. The value can be from 1 to 40. H means Heght, ndcatng the heght of prvacy mask. The value can be from 1 to 30. *The sum of the T value and the H value should be less than or equal to 70. What s Center? It s the coordnate of Pan and Tlt, whose locaton s center of the vdeo on the screen. What s Range? The range ndcates vertcal and horzontal vew angle of the vdeo on the screen A 37

38 (Center50,45) W(15) P(57.5), T(45) Object H(8.75) H: 35 W: 60 < Example of Prvacy Mask shown on the screen > How to draw the prvacy mask above Let s suppose there s an object you want to hde nsde the prvacy mask zone. The center of the camera s located at the coordnate, (50, 45) of pan and tlt, and the horzontal and vertcal vew angles are 60 and 35 respectvely. 1. Let s defne the ntal pont to cover the object. The object s away toward the rght by 1/4 horzontally and on the same lne vertcally from the center. Thus, the values of the ntal pont are 57.5 and 45, whch are respectvely P value and T value. 2. To fully cover the object horzontally, there needs to be two squares from the red pont(p,t) to the rght, whose wdth s 2/4(=15). Therefore the W value s To fully cover the object vertcally, there needs to be one square downward from the red pont(p,t), whose heght s 1/2(=8.75). Therefore the H value s The speed dome cameras have the range lmt n tltng. Thus, the feld avalable for prvacy mask s also lmted Vdeo-Out Cameras wth the vdeo output nterface wll have the user s nterface lke below on the webpage. To confgure the vdeo-output mode, go to Setup > Vdeo&Audo >Vdeo-out. Select the vdeo-output mode among NTSC, PAL and off accordng to your ntenton. Unless you change the mode, the current selecton s mantaned. Vdeo Output cannot be confgured whle any of the features below s actvated. - Image Rotaton - Vdeo Stablzaton A 38

39 5.3. Event Confguraton On the Event Confguraton secton, users can lnk event sources such as DI(Dgtal Input: sensor) and Moton Detecton to event actons such as trggerng alarms and sendng notfcatons va emal or FTP/HTTP/TCP servers. Before you create an event profle, go to the desred subscrber confguraton page (E-Mal Recpent, FTP Notfcaton, or HTTP Notfcaton), and complete the requred server settngs Event Rules After the event subscrber confguraton, you can make several event profles wth dfferent optons of event source and notfcaton. Go to Setup > Event Confguraton > Event Rules to manage the event profle. On ths page, you can confgure the event source type and specfy how to send notfcaton message when an event trgger s actvated A 39

40 You can check the defned profle lst on the man page, and add, copy, modfy or remove an event rule. 1. Tck the checkbox of Enable event rules under Confguraton tab, and clck apply to begn creatng event rules. 2. Clck Add to create an event rule, and select desred Event Sources when a pop up wndow of Add to Event Rule Lst appears. 3. Clck Event Acton tab to select desred Event Actons. 4. Name the event rule on the Confguraton secton, and tck Enable Rule f you want to use the event rule, and then clck OK. 5. Clckng on an event rule n Event Rule Lst wll dsplay the detaled nformaton about the hghlghted event rule. If you want to copy a profle of an exstng event rule, hghlght the desred event rule, and clck Copy. Copyng an event profle allows you to easly create multple profles wth the same confguraton. Clckng Modfy enables you to modfy the profle of the hghlghted event rule. Clckng Remove wll get rd of the hghlghted event rule from Event Rule Lst. * Please see the followng pages for the detal about the event sources and event actons. Event Source Confguraton The supported event source may be dfferent dependng on the hardware/software specfcaton of each model. The event sources can be categorzed nto three dfferent groups for ther mutually exclusve operatons. Thus, when any source from each group s enabled, all the other sources of the other two groups are dsabled. Schedule s a supplement to help event sources become more tme specfc A 40

41 1st group (Detectors) Sensor (DI#1) Select Sensor(DI#1) to enable DI as the event source. There are three modes: - Actve: Selectng Actve enables detecton of dgtal nput. - Inactve: Selectng Inactve enables detecton of the endng moment of dgtal nput. - Both: combnaton of Actve and Inactve Selectng the status of sensor as the event source s dependent on the confguraton of the sensor s detecton type at the sensor/alarm confguraton page. Refer to Sensor/Alarm for the confguraton. Alarm(DO#1) Select Sensor(DO#1) to enable DO as the event source. Ths feature wll appear only for the models supported wth DO. There are three modes: - Actve: Selectng Actve enables detecton of dgtal output. - Inactve: Selectng Inactve enables detecton of the endng moment of dgtal output. - Both: combnaton of Actve and Inactve Selectng the status of sensor as the event source s dependent on the confguraton of the sensor s detecton type at the sensor/alarm confguraton page. Refer to Sensor/Alarm for the confguraton A 41

42 PIR Select PIR to enable PIR sensor as the event source. There s a hyperlnk to access the PIR confguraton page. Ths feature wll appear only for the models supported wth PIR functon. Moton detecton Select moton detecton to enable moton detecton as the event source. Select the moton detecton zones to use as the event source from the lst. (Refer to Moton Detecton to create the moton detecton zones pror to settng moton detecton as the event source.) There s also a hyperlnk to access the moton detecton confguraton page. VCA source Select VCA source f you want a certan VCA source as one of the event sources. Avalable optons may dffer by purchased analyss optons. There s also a hyperlnk to access the VCA confguraton page Here s the explanaton on some major VCA sources. - Confguraton: When VCA confguraton s changed - Tamper: When there s camera tamperng. - Trgger mode: Ths mode enables users to set the moments that VCA defnes a rule as a trgger. - Rsng edge: The moment a defned rule begns - Fallng edge: The moment a defned rule ends - Both: combnaton of Rsng edge and Fallng edge - Covert VCA event to MD event: Ths feature enables VCA event message to be converted to Moton Detecton event message. Face Detecton Select Face Detecton to enable Face detecton as the event source. Select the desred detecton profle to use as the event source from the lst (Refer to Face Detecton to create face detecton zones pror to selectng Face Detecton as the event source.) There s also a hyperlnk to access the face detecton confguraton page. Fsheye camera s not supported wth Face Detecton. Network loss/detect Select Network loss/detect to enable network loss and detecton as an event source. Refer to Network Loss for confguraton A 42

43 2 nd group (System) Vdeo loss/detect Ths opton appears only for the encoder. - Loss: Tck ths checkbox f you want to generate an event when there s vdeo loss. - Detect: Tck ths checkbox f you want to generate an event when vdeo s detected. - Both: Tck ths checkbox f you want to setup both above as event source. Network settng changed Ths opton allows users to receve events when network settng s changed. Storage error Ths opton allows users to set an event for alarm or notfcaton n case there s an error n the recordng storage. 3 rd group (Tme) Recurrence Ths opton allows users to perodcally take certan actons. Set the Recurrence perod by day, hours, or mnutes. The range of the nput number s from 0 to The ntal pont of the recurrence perod s mdnght. However, f Recurrence s combned wth schedule, the ntal pont of the recurrence tme wll be the ntal tme set for schedule. Schedule Schedule s the addtonal opton to add tme condtons to event sources. Thus, Schedule allows users to receve events or to take certan actons accordng to the defned specfc schedules. Select a desred schedule profle from the drop-down lst. The profles are confgured n the Schedule page. Go to Setup > Event Confguraton > Schedule for more detals. Or, use the hyperlnk Go to Schedule Confguraton. Schedule can be combned wth Recurrence, and the tme settngs n Schedule always control the tme settngs n Recurrence A 43

44 Event Acton Confguraton The supported event acton may be dfferent dependng on the hardware/software specfcaton of each model. Actve Alarm (DO) Tck the check box to actvate the Dos for the event publsher. The number of DO check boxes vares dependng on each devce. - Actve: If you check ths opton, DO wll be actvated when there s an event. - Inactve: If you check ths opton, DO wll be deactvated even when there s an event detected. Specfy the alarm duraton. Duraton ndcates how long the DO works, whch can be adjusted from 0 to 600 seconds. If you select Unlmted, DO wll last long untl you manually turn t off A 44

45 Recordng Select the check box to record the vdeo, audo and meta data to the preconfgured FTP or SD memory card when the event s trggered. To use ths event acton, make sure that the recordng type s set as Event. It can be confgured at Storage > Recordng > Confguraton. - Prebuffer/Postbuffer: Specfy the recordng duraton before and after the event occurs. But the buffer bar wll be nactve when the followng optons are selected for Event Source confguraton. 1) Ether Network Loss/detect or Schedule s selected. 2) Both of Network loss/detect and Schedule are selected. - Attached thumbnal (or face mage): Selectng ths checkbox wll attach a thumbnal or face mage for recordng. Save event log All event log can be downloaded at Setup > Mantenance > System Log. Refer to System Log for the nstructons f you want to download the event log fle. Send E-mal notfcaton Select the check box to send E-mal to desgnated recpents. - Attached thumbnal (or face mage): Select ths checkbox, f you want to attach thumbnal or face mage n the emal. - Attached snapshot: To attach a snapshot mage, select the checkbox of Attach a snapshot. The mnmum of one post mage whch s taken at the trggered moment can be emaled along wth a maxmum of three pre mages, whch are taken before the trggered moment. Or, an emal only wth post mages(mn:1, max:3) can be sent wthout any pre mage. From the recpent lst, select the recpent to send the notfcaton. To create a new recpent that s not on the lst, go to Setup > Event Confguraton > E-Mal Recpent and create a new recpent nformaton. Once the desred recpent s selected, wrte the subject for the emal. Upload notfcaton to FTP Select the check box to actvate the FTP notfcaton. : If Schedule n the event source s used as only one event source, ths opton wll be blocked A 45

46 - Attached thumbnal (or face mage): Select ths checkbox, f you want to nclude thumbnal or face mage n the FTP notfcaton. - Attached snapshot: Select ths checkbox, f you want to get snapshot of the event to the FTP server. From the FTP notfcaton lst, select an FTP server to get the notfcaton. To create a new FTP server that s not on the lst, go to Setup > Event Confguraton > FTP Notfcaton, and confgure a new FTP server nformaton. Send HTTP Notfcaton Select the check box to actvate HTTP notfcaton method. From the HTTP notfcaton lst, select the HTTP server to send the notfcaton. To create a new HTTP server that s not on the lst, go to Setup > Event Confguraton > HTTP Notfcaton and create a new HTTP server nformaton. Send TCP Notfcaton Select the check box to actvate TCP notfcaton method. To confgure a new TCP server, go to Setup > Event Confguraton > TCP Notfcaton and confgure TCP server nformaton. Send Notfcaton va TCP event server Select the check box to actvate TCP event server notfcaton method. To confgure a new TCP server, go to Setup > Event Confguraton > TCP Server and confgure TCP server. Send multcast notfcaton Select the check box to actvate multcast notfcaton, and go to Setup > Event Confguraton > Multcast Notfcaton to confgure multcast notfcaton. Or, go to Multcast notfcaton for the detal. Actve PTZ Select the check box, and select the preset poston to move to the specfc preset poston of PTZ camera. To confgure a preset, go to Lve > Panel > PTZ > Pre Poston. To attach a snapshot mage on the confguraton of E-mal Recpent or FTP notfcaton, make sure the snapshot settng from Setup > Vdeo & Audo > Encoder Profle has been enabled A 46

47 Moton Detecton To set up the zones and rules confguraton requred for the moton detecton, go to Setup > Event Confguraton > Moton Detecton. Moton Zone Confgure the moton detecton zones by the followng steps. 1. Under the panel of Moton Zones, select Enable on a desred Zone ID. Then, a rectangle appears on the screen. 2. Relocate the rectangle or adjust the sze wth the left mouse button by draggng the mouse on top or on the edge of the rectangle. The rectangle s moton detecton zone. 3. Provde a relevant name and descrpton of the moton detecton zone on ts text box. 4. Adjust the value senstvty and object sze. 5. Uncheck Enable f you want to hde the moton detecton zone. 6. Clck SAVE to apply changes to the screen. What s Senstvty? Every moton detecton zone s dvded nto multple squares, whch s called Macro blocks. Each of macro blocks conssts n groups of 16 x 16 pxels. The value of senstvty means the senstvty of each macro block. To confgure the zone less senstve than the factory default (128), set the number value hgher; to confgure the zone more senstve than the factory default, set the number value lower A 47

48 What s Object sze? The object sze value means the proporton of the macro blocks whch has exceeded the confgured senstvty. If you want to confgure the zone less senstve than the factory default (128), set the number value hgher; to confgure the zone more senstve than the factory default, set the number value lower. Dsplay Moton Informaton - Show moton blob : Tck the checkbox of show moton blob, and clck SAVE to apply f you want to see whch spot has subject s movement on the screen. Before enablng moton blobs on the vew, enable metadata of stream n RTSP/RTP s pre-requste. Clck the hyperlnk of GO to RTSP/RTP Confguraton under the tab of Moton Blob. Or refer to RTSP/RTP (multcast or uncast) for the detals. - Show moton actvty : Tck ths opton to show the graph of moton zone. The red lne n the black box helps users ntutvely adjust the Senstvty and ObjectSze parameters whch s usually useful when nstallaton. If the moton s detected, there wll be wrte graph shown. When the whte graph bar matches wth the red lne, whch means the moton zone s confgured perfectly. In another word, f the moton graph exceeds the red lne, an alarm wll be occurred A 48

49 Face Detecton To confgure the network loss event, got to Setup > Event Confguraton > Face Detecton. Face Detecton Zone Confgure the face detecton zones by the followng steps. 1. Check the checkbox of Enable under the Confguraton tab. 2. Check the checkbox(es) of zones you wsh to confgure under the Face Detecton Zones tab. 3. Relocate the rectangle(face detecton zone) or adjust the sze wth the left mouse button by draggng the mouse on top or on the edge of the rectangle. 4. Modfy Name and Descrpton on each confgured zone of easy recognton. 5. Clck Apply to save the confguraton. VCA cannot be used whle Face Detecton s enabled. Fsheye camera s not supported wth Face Detecton A 49

50 Network Loss To confgure the network loss event, got to Setup > Event Confguraton > Network Loss. - Check Ethernet connectvty : Select ths opton to check Ethernet connectvty whch s actually RJ-45 cable connecton. - Check png response : Select ths opton to check the network connectvty by png test. Interval : Adjust the slde bar to set the nterval for png test. Host address : nput the IP address or URL for png test Heart beat The camera sends out a heartbeat event repeatedly to the destnaton server wth the specfed tme nterval to nform the server of whether the camera s alve A 50

51 Schedule Users can create a lst of schedules to use them for the combnaton wth the other event sources. To confgure schedules, go to Setup > Event Confguraton > Schedule. You can add, modfy, or remove the schedules on the man page. - Schedule Lst shows all the defned profles of schedules. - Add: Clck ths button f you need to create a specfc schedule. - Modfy: Clck a schedule on the Schedule Lst that you wsh to modfy, and clck the Modfy button to brng up a pop-up wndow of Modfy Schedule. - Remove: Clck a schedule on the Schedule Lst that you wsh to delete, and clck Yes or Cancel f a pop-up wndow asks you to confrm the removal. - Informaton: Clckng a schedule on the Schedule Lst wll dsplay the profle of the hghlghted schedule. Clckng Add or Modfy wll dsplay the confguraton page shown below A 51

52 Name Type an easly recognzable name so that you can convenently select t by the name on the drop-down lst when usng t n the event source. Descrpton Type addtonal nformaton to help you dentfy the confguraton easly f wshed. Date Clck the checkbox of Date f you want to have a specfc perod for the schedule. Then, defne the month, the date and the year of Start and End respectvely. Tme Clck the checkbox of Tme f you want to have a specfc duraton for a schedule. Days Clck the checkboxes of correspondng days you wsh to apply for the schedule E-mal recpent To confgure the emal recpent lst for event notfcaton, go to Setup > Event Confguraton > E-Mal Recpent. Confguraton Send rate lmt Users can set a perod to block repeated emal notfcatons wthn the confgured tme perod from o second to 600 seconds. Set the send rate lmt and clck the Apply button. Contents There are two dfferent optons to format the emal contents. - HTML encoded : Contents n emalare HTML encoded. - Plan text : Contents n emal are sent as plan text. E-Mal Recpent Lst 1. Clckng Add wll brng up a pop-up wndow, Add to E-Mal Recpent Lst as shown below. 2. Create an E-mal recpent profle. -Name : Specfy the e-mal recpent name. -Descrpton : Input a bref descrpton of the e-mal recpent to easly dstngush A 52

53 -E-Mal Address : Enter the e-mal address of the e-mal recpent. If you use host name, a vald DNS server must be specfed n TCP/IP network settngs. : Maxmum number of E-mal recpent to be set s eght. 3. If you want to modfy an E-mal recpent s nformaton, clck Modfy, and update the nformaton.( Clckng an E-mal recpent under E-Mal Recpent Lst wll dsplay the detal about the selected recpent profle.) If you want to remove an E-mal recpent from E-Mal Recpent Lst, clck Remove, and clck OK to apply the removal when a popup wndow appears to ask you to confrm the removal. *Go to SMTP Confguraton: If you want to send test E-mal to the E-mal recpents, you need to confgure the SMTP server nformaton frst. Go to Setup > Network Confguraton > SMTP(E-Mal), and complete the requred settngs. Refer to SMTP for more nformaton. After the settng, make sure to clck OK to save changes A 53

54 FTP Notfcaton To confgure the FTP server for event notfcaton, go to Setup > Event Confguraton > FTP Notfcaton. You can check the defned FTP server lst on the man page, and add, modfy, or remove server nformaton. - FTP Notfcaton Lst: It shows all the defned FTP server names. - Add: Clck ths button to add FTP server nformaton. - Modfy: Select an FTP server name, and clck ths button to modfy the current nformaton of the FTP server. - Remove: Select an FTP server name, and clck ths button to remove from the lst. - Informaton: It dsplays the detaled nformaton of the selected FTP server from the lst A 54

55 Clckng ether Add or Modfy button wll dsplay the confguraton page shown below. Name Specfy the FTP server name. Descrpton Input a bref descrpton of the server to easly dstngush. Address Enter the IP address of the FTP server. Port Enter the server port number. The default s 21. Target drectory Enter the folder name where the created fles wll be placed. If the folder does not exst on the server, the specfed folder name wll be automatcally created on the FTP server. Account and password Enter the logn user name and password of the FTP server. The account and password nformaton must be entered even for the anonymous FTP. Password nput range : 32 characters lmt wth any characters (dependng on the polcy of your FTP server) Fle name format Select the desred date format. After the settng, make sure to clck OK to save changes A 55

56 HTTP Notfcaton To confgure the HTTP server for event notfcaton, go to Setup > Event Confguraton > HTTP Notfcaton. You can check the defned HTTP server lst on the man page, and add, modfy, or remove server nformaton. - HTTP Notfcaton Lst: It lsts the defned HTTP server names. - Add: Clck ths button to add HTTP server nformaton. - Modfy: Select an HTTP server name, and clck ths button to modfy the current nformaton of the HTTP server. - Remove: Select an HTTP server name, and clck ths button to from the lst. - Informaton: It dsplays the detaled nformaton of the selected HTTP server from the lst A 56

57 Clckng ether Add or Modfy button wll dsplay the confguraton page shown below. Name Specfy the HTTP server name. Descrpton Input a bref descrpton of the server to easly dstngush. Address Enter the IP address of the HTTP server. Port Enter the server port number. The default s 80. Account and password Enter the logn user name and password of the HTTP server. If you want to skp the logn authentcaton process, leave the text boxes blank. Message Enter the message that you want to send wth. Enablng the Append detaled nformaton wll add event detals n message. Please note that ths requres / at the begnnng of the message. For example, YES( /ABABAB ), NO( ABABAB ) NOTE: The maxmum length of the message s 63 characters s the frmware verson 1.8 or below. After the settng, make sure to clck OK to save changes A 57

58 TCP Notfcaton To confgure the TCP push for event notfcaton, go to Setup > Event Confguraton > TCP Notfcaton. IP Address, port Type the confguraton of TCP server. Connect Tmeout TCP push tres to connect to TCP server durng the settng tme, but f connecton s not made durng the settng tme, TCP push wll stop to try to connect. Send Tmeout Holdng tme for data transmsson when event occurs. Alve Type You can confgure the condton of connecton and the default value s Tmeout. - Once: Only one connecton s made for each event. There s no check that the connecton s succeeded or not. - Unlmted: The connecton contnues for data transmsson whether event occurs or not. - Tmeout: After the last data transmsson f there s no event for settng tme of alve tme the connecton wll be dsconnected. Alve Tme When Alve type s confgured as Tmeout, the connecton wll be contnued for Alve tme A 58

59 Message Customzaton Users can customze the message for TCP notfcaton. Clckng the button of Message Customzaton wll generate a pop-up wndow lke below. - Message Header: To use the customzed message header, clck the checkbox of Enable usng customzed message header. Then, the box wth the message header wll be actvated. Once t s actvated, puttng the cursor on the message header wll dsplay the supported keywords. - VCA/MD/Network/ DIDO: You can choose an opton between default message and customzed message on each event. Lke the customzed message header, droppng the cursor on each customzed message for each event wll dsplay the supported keywords A 59

60 TCP Server To confgure the TCP server, go to Setup > Event Confguraton > TCP Server. You can use TCP server to get the event notfcaton from the devce and send them to the clent applcaton. Port Type the utlzed port number to delver the event message program Message Customzaton Customze the message for TCP server. Clckng the button of message customzaton wll generate a pop-up wndow lke the same n TCP Notfcaton. Refer to TCP Notfcaton for the nstructon Multcast Notfcaton To confgure the multcast server, go to Setup > Event Confguraton > Multcast Notfcaton. You can use Multcast server to get the event notfcaton from the devce and send them to the clent applcaton. Type Address, port, and TTL accordng to your system settng. Factory default s A 60

61 5.4. Network Confguraton TCP/IP (DHCP, Statc IP, DNS settng) To change the TCP/IP settng, go to Setup > Basc Confguraton > TCP/IP A 61

62 IP Address Confguraton User can set up network confguraton of IPv4 or IPv6 here. Enable IPv4 Tck ths opton to actvate and confgure IPv4 settngs. - IP Confguraton by DHCP If you want to get your IP from DHCP server automatcally, check ths opton and clck the Apply button. When the dalog box appears on the screen, clck the OK button. - Use the statc IP address If you want to use your devce wth a statc IP, select Use the followng IP address and nput the followng nformaton: - IP address: The IP address of your devce. The test button shows f the typed IP address s occuped or not. If the typed address s avalable, Okay appears next to the Test button. If the typed address has been taken already, Fal appears next to the button. - Subnet mask: The address of subnet mask of your devce. - Gateway address: The gateway address of your devce. - Broadcast address: It s automatcally fxed by the subnet mask and IP address of your own. For example, f you use B class ( ) of mask, the broadcast address wll be Enable IPv6 Tck ths opton to actvate and confgure IPv6 settngs. - IP address (Informaton) : It wll automatcally show the IP address after actvaton IPv6 opton. - Enable accept router advertsements : Tck ths opton f you want to receve network advertsement from the router. - Enable DHCP : Tck ths opton to enable DHCP servce. - DHCP type : - auto : Automatcally get an IP address through one of the two ways below. - stateful : Get the IP address of IPv6 from DHCP server. - stateless : Get the IP address of IPv6 by combnng MAC address wth the network nformaton that has receved from router. ( n ths case, f the Enable accept router advertsements opton s dsabled, you cannot get the IP address.) - IP address : You can also nput a statc IPv6 address here. - Fxed length : The length of prefx of your devce. - Default router : The default router of your devce. DNS Confguraton Type the IP address of DNS server you use. Lnk-Local Address Ths s a bult-n functon that assgns the devce an addtonal IP address, whch can be used to access the unt from other hosts on the same segment of the local network. An IP address s automatcally assgned when the camera boots up. The camera can have both a Lnk-Local IP and a statc/dhcp-suppled IP address at the same tme. The IP address block s from to To change the IP address, clck Renew A 62

63 Web Server To change the Web server settng, go to Setup > Network Confguraton > Web Server. The default value of web server s set to HTTP. To change ts settng from HTTP to HTTPS, select HTTPS from the menu. It s recommended f enhanced securty s requred for accessng the web page. The data transmtted by HTTPS s encrypted by SSL to strengthen the securty. What s SSL? SSL s the abbrevaton of Secure Socket Layer. SSL protects web server and makes t easy for users to trust the contents. When HTTPS s beng utlzed to communcate wth a server, the SSL certfcate s requred for the web server and the certfcate enables encrypton of vdeo and audo data durng onlne transactons. OpenSSL s one of the data securty protocols for Lnux system, whch s used for the product. Settng the port number of web server To communcate wth server by HTTP or HTTPS wth TCP, the port number should be n between 1 and The default value s 80. Redrectng HTTP to HTTPS Even when a user tres to access the server wth http, t s possble to enable the server to be redrected to HTTPS. In ths case, do not set the value 80 as the port number snce t may cause a conflct wth HTTP port. Authentcaton Type When accessng the page whch requres authorty, the web browser asks ID and password and then transfers them to the camera by the methods below. basc: It uses smple way of encrypton of ID and Password wth clear text dgest: It uses more enhanced way of encrypton A 63

64 HTTPS Settng The features rec-tangled n red wll appear when HTTPS s selected on the confguraton tab. Certfcate Create & Install Create & nstall self-sgned certfcate: Clck the Create button to create a self-sgned certfcate. Create certfcate sgnng request : A certfcate request wll be created when clckng the Create button. Then, browse the certfcate whch wll be nstalled. Create certfcate request The text box wll show the status of the certfcate request. If you want to see the nformaton about the certfcate request, clck the Propertes button. To remove the certfcate request, clck the Remove button. Installed certfcate The text box wll show the status f there s certfcate has been nstalled. If you want to see the nformaton of the certfcate, clck the Propertes button. To remove the certfcate request, clck the Remove button A 64

65 NTP Server To change the NTP server settng, go to Setup > Network Confguraton > NTP. NTP Server Lsts Users can set up to four NTP servers. To enable the NTP servers, DNS server settng must be completed from Setup > Network Confguraton > TCP/IP UPnP To change the Unversal Plug & Play confguraton, go to Setup > Network confguraton > UPnP. UPnP allows IP devces to connect seamlessly, and smplfy the mplementaton of network n remote PC envronments. On ths page, users can enable or dsable UPnP by clckng the Enable check box and apply the desred name (frendly name) A 65

66 RTSP/RTP (multcast or uncast) For the RTSP/RTP settng, go to Setup > Network Confguraton > RTSP/RTP A 66

67 The product supports multcast and uncast for both stream channels. Clck the approprate stream tab and confgure the RTP sesson as requred by your network system. RTSP Confguraton Set the port number for RTSP streamng. RTSP Authentcaton opton s avalable for those who have mplemented the authentcaton process. It has two methods. - Basc: It uses smple way of encrypton of ID and Password wth plan text. - Dgest: It uses more enhanced way of encrypton. SRTP Confguraton for RTP streamng Enable Enable or dsable the RTPS functon by selectng the checkbox to secure RTP packet. Protecton profle Select a desred protecton profle. There are four profles on drop-down lst. Master key Clck the Key generaton button to get a master key n the text box. Salt key Clck the Key generaton button to get a salt key n the text box. Key establshment may be supported n later versons. RTSP Confguraton for UNICAST Sesson name Type the approprate sesson name. The allowed range for the sesson name s 64 characters wth alphabets, Arabc numbers, and underscore bar(_). Enable audo stream Check ths box to nclude the audo stream n addton to the vdeo stream. Enable Metadata Check ths box to add the metadata. Enable Onvf Metadata Check ths box to nclude the Onvf metadata. Enable QoS DSCP By enablng the Qualty of Servce (QoS) feature, you can specfy prorty level of network traffc for vdeo, audo, and metadata (moton detecton and VCA). For each traffc type, determne the DSCP (Dfferentated Servces Codepont) value, whch represents a QoS class n the Dfferentated Servces (DffServe) model. For the detals about the DffServ standard, refer to RFC2474 and RFC A 67

68 RTSP confguraton for MULTICAST IP Address In order to receve the streamng data from the devce, set the IP address of group whch s used for PC to jon. 0,0,0,0 s confgured as a factory default and t enables router program to generate the avalable IP for the devce automatcally. If you want to use specfc address, type the address n the blank. Avalable IP address range s from to However, there are already assgned IP addresses n the range. Please refer to for further detal. RTP multcast s not allowed for streamng even f the address and the port nformaton are known. How does auto confguraton of IP address work? As the sesson name for each RTP sesson s defned already on the server, your PC can get the stream by the rtsp:// rtsp server paddress : port / rtp sesson name wthout the manual decson of IP address on the webpage. Port Set the port number used for router to receve the streamng data from the product (No need for uncast). The range of the port numbers s from 1 to Be sure that there are specfc port numbers that you cannot use as they are already assgned to other necessary protocols. * Default port number for each stream for each data s pre-defned on the textbox of the webpage, but users can set the numbers wthn the port range. TTL Set the TTL value. If you set 1 for TTL, t means the packet wll pass only n a subnet (No need for uncast). What s TTL? It s the abbrevaton of Tme to lve. If data s sent out from the encoder va network and all of the packets are alve permanently on the network, t wll cause the bg network load. TTL helps reduce the network load by controllng the tme of stayng on network. For example, f you set the TTL as 50, the data wll be deleted after passng by 50 routers. All other optons are the same as the Uncast A 68

69 RTMP For the RTMP confguraton, go to Setup > Network Confguraton > RTMP. Confguraton Specfy the RTMP port, and defne the chunk sze to let the defned sze of data transferred at a tme. For each stream, type the applcaton name of the server that a clent wll access and the name of the stream. Avalable meda types for RTMP are H.264 and 8kHz ulaw mdns (Multcast DNS) For the multcast DNS settng, go to Setup > Network Confguraton > mdns. Confguraton If you check the box of Enable, mdns s actvated. To use the IPAdmnTool to dentfy the devce, mdns must be enabled. You can type a frendly name to be shown on the applcaton program WS-Dscovery For the WS-Dscovery settng, go to Setup > Network Confguraton > WS-dscovery. Confguraton If you check Enable, WS-Dscovery functon wll be actvated. It enables users to browse all the ONVIF supported cameras on the network A 69

70 SMTP To change the SMTP settng, go to Setup > Network Confguraton > SMTP(E-Mal). You can set the user s emal account and server to apply ths SMTP for the event subscrber or any other SMTP requred purpose. Confgurng user nformaton Sender s name Type the name of the sender; t can be ether generc notfcaton bot, name of the admnstrator, or the specfc camera devce, depends on ts purpose. Input range: 40 characters lmt From emal address Type the e-mal address of a sender. Input range: 128 characters lmt Confgurng server nformaton Mal server address In order to send an emal, the product needs the nformaton of user s mal server. Type the host name or IP address of the mal server. If you use the host name, t requres the DNS regstraton. Check the DNS confguraton from Network Confguraton > TCP/IP and see f your DNS confguraton s correct. If you use host name, a vald DNS server must be specfed n TCP/IP network settngs. Input range: 128 characters lmt Mal server port Type the mal server s port number wthn the range from 0 to Enable encrypted connecton (SSL) If your emal server requres encrypton process of SSL and TLS, select the Enable encrypted connecton (SSL) check box. TLS (Transport Layer Securty) and SSL (Secure Sockets Layer) algorthm can be requred for the securty of communcaton over networks. It depends on your emal server and you should check out the communcaton protocol of SMTP server A 70

71 Use authentcaton to log n ths server If logn nformaton s mandatory before connectng to the server, check the box. Once the box s checked, the user name and password boxes appear for user to type. User name nput range: 128 characters lmt Password nput range: 32 characters lmt Send Test E-Mal Enter an emal address that you want to receve the test e-mal, and clck the Test button. Then, check f the emal account receves the test emal from the sender s emal address DDNS (Dynamc DNS) To change the Dynamc DNS settng, go to Setup > Network Confguraton > DDNS. Confguraton Enable or dsable DDNS by selectng the check box. DDNS Protocol Type Select the desred protocol type. DynDNS/No-IP/FreeDNS DDNS Settng Type the doman name you want to use for the product and defne the update tme. The factory default s 600 seconds, and t enables the product to notfy the DDNS of the current doman name n a gven length of nterval. Type the user name and password of your DDNS account. 8 astersks cannot be used for the password A 71

72 SNMP Smple Network Management Protocol (SNMP) s used n network management envronment to montor network-attached devces for ther condtons. By retrevng the system nformaton, t allows to manage network archtecture, performance, devce, and securty. To enable SNMP, select the Enable check box. The encoder supports SNMP verson 1, 2 and 3. Setup > Network Confguraton > SNMP Confguraton Actvate checkbox to enable the SNMP. SNMP Verson Select verson2c or verson 3 that you wll use for SNMP settng. Dependng on whch type you choose, t may show dfferent opton at confguraton sub-categores. SNMP Descrpton - Locaton: Provde descrpton of SNMP locaton - Contact: Provde SNMP managng contact VACM Vew Access Control Model) settng - Read Communty: nput the communty name, whch s the authorzed ID for readng SNMP data. (shown n v2c only) - User : It s to add, Modfy and Remove User nformaton whch s needed when accessng to SNMP. (shown n v3 only) A 72

73 How to add a user for VACM Settng 1. Input the User name and Password to create a profle. Password nput range : 8~255 characters Accepted character for password : Englsh alphabet letters and numbers 2. Authentcaton Protocol : Select authentcaton protocol type as MD5 or SHA. 3. Prvacy Protocol : Select prvacy protocol as CBC_DES or CFB_AES. SNMPv3 contans the specfcaton that consst of NoAuthNoPrv, AuthNoPrv, AuthPrv communcaton mechansms. In v1.8.0 frmware, t only supports AuthPrv mechansm. So both of authentcaton and prvacy protocol mechansms have to be selected. Trap Settng Trap Settng provdes nformaton ncludng changed DI, DO, or VCA to notfy the manager. Select the SNMP Trap verson to receve Trap event, and nput the IP address and communty on the text box A 73

74 Wreless LAN : Ths part s for the camera wth w-f module only. To confgure the wreless mode, the devce needs to be connected to a wred network for the frst tme. Setup > Network Confguraton > Wreless LAN 1. From the USB Wreless AP Lst tab, select the wreless network where the devce wll be located under. Provde the network key (password). 2. From Wreless network IP confguraton tab, select Obtan an IP address va DHCP or Use the followng IP address. A. Use Obtan an IP address va DHCP f you want network to provde automatc address. B. Use Use the followng IP address and type specfc addresses f you want the devce to use specfc desgnated address. 3. Clck Apply button and wat for system to correspond. 4. Dsconnect the wred cable from the camera and wat for 10~15 seconds. 5. Use IPAdmnTool* to dentfy the devce or type URL n Wndows Explorer to access. Lnk-Local Address Ths s a bult-n functon that assgns the devce an addtonal IP address, whch can be used to access the unt from other hosts on the same segment of the local network. An IP address s automatcally assgned when the camera boots up A 74

75 The camera can have both a Lnk-Local IP and a statc/dhcp-suppled IP address at the same tme. The IP address block s from to If you want to enable ths functon, tck the checkbox of Enable Auto-Confguraton lnk-local address, and clck Renew f you want to change the IP address. * IPAdmnTool needs to be started n a same network where wreless devce s! operatng at. Cauton IP Flterng If you want to control the network traffc to your camera, go to Setup > Network Confguraton > IP Flterng. Confguraton - Enable: Tck the checkbox f you want to use IP flterng functon. - Always allow png request: Ths allows users to png the camera even f certan IP addresses are blocked. - Allow admn IP: The IP address n the IP address box s always allowed to the camera. The address wll be an admn user s IP. Polcy - Allow: In Allow mode, IP addresses except those specfed n the lst of Fltered IP Addresses are dened. - Deny: In Deny mode, IP addresses except those specfed n the lst of Fltered IP Addresses are allowed. How to confgure IP flterng 1. Tck the checkbox of Enable. 2. Specfy the admn IP (f needed). 3. Choose the polcy between Allow mode and Deny mode. 4. Add the IP addresses based on the mode n Polcy. 5. Clck the Apply button A 75

76 Hosted Servce To Confgure the hosted servce connecton, go to Setup > Network Confguraton > Hosted Servce. Tunneled Lnk Setup Settng 1. When you enable Hosted Servce, you should type server address, TCP pot of hostng server and update nterval. 2. When you connect to the hostng server, your devce sends MAC address, brand and model name to the hostng server. 3. Your devce sends update to the hostng server perodcally dependng on Update Interval A 76

77 5.5. Storage From the Storage secton, users can confgure a storage devce and recordng. The storage secton s found va path, Setup > Storage SD To search for mounted USB or storage devces and check the devce nformaton, clck Setup > Storage > SD. SD Storage Lst: The mounted devces are lsted by clckng Refresh SD Devce Lst. Detal Storage Informaton: The detaled nformaton of the selected storage devce s dsplayed. The nformaton ncludes devce name, type, total capacty, free space, and devce status. Record Devce Control: allows users to format a storage devce as vfat or ext3 fle system, and mount or eject storage devce that s avalable from the devce lst. ext3 fle system s recommended due to ts reslence aganst data loss n case the card s ejected or f there s abrupt power loss. Class 4 or hgher Class SD card s recommended when recordng hgh resoluton vdeo. To start the recordng, the devce must be connected. If the connected devce does not appear, try to reboot the devce and check ts status agan A 77

78 FTP To specfy the FTP server to record the vdeo and audo, clck Setup > Storage > FTP. Please note that ths s the confguraton for FTP server used only for the event recordng. Please refer to 5.3 Event Confguraton for more detals. Name Specfy the FTP server name. IP Address Enter the FTP server address. Port Enter the server port number. The default s 21. Target Drectory Enter the target drectory to store the data. Account Enter the logn user name of the FTP server. Password Enter the password of the FTP server. Password nput range : 32 characters lmt wth any characters (dependng on the polcy of your FTP server) Fle Name Format (Prefx of flename) The prefx of fle name s USN (Unque Seral Number) of each devce for easer recognton of the recorded fles among numerous usng the same FTP server. The date and tme n the recorded fle name s based on UTC tme A 78

79 Recordng Ths secton of a recordng type and ts confguraton can be done at Setup > Storage > Recordng. GX seres devces currently support recordng lmted for H.264 vdeo codec. Please confgure the vdeo codec as H.264 f you need to record vdeo. (Refer to Stream for the codec confguraton.) Recordng Type There are three optons. Contnuous/Event/None Contnuous Recordng When you select Contnuous n Recordng Type, the menus for the confguraton of contnuous recordng wll appear lke below. Ths mode enables contnuous recordng on an SD card wth AVI format. Recordng storage Optons - Storage devce: SD card s pre-tcked and selected. - Recyclng : Users can select one of the optons when the storage s full. Stop recordng: Stops recordng and keeps the recorded data. Delete fles and recycle (oldest frst): When the storage becomes full, ths opton replaces oldest fles wth latest fles (based on dates) A 79

80 Recordng Settng - Prefx of flename : Gve a relevant name that wll be used as the recorded fle name. For the ease recognton of duplcate fles, the end of every recordng fle name ncludes the date and tme nformaton as a default. - Recordng resource : Select one opton between Vdeo only and Audo+Vdeo. - Rule of segmentaton : (by) Sze: The range of the fle sze s from 100 to 1440 Megabytes. (by) Tme: The range of the recordng length s from 5 to 20 mnutes. - Stream source : Users may choose prmary recordng source from ether frst stream or second stream. If t s a sngle stream, the second stream opton s unavalable. Instant Recordng Input the recordng tme n second n the text box next to the Start button, and press the Start button. When you press the button, recordng wll start mmedately. Whle recordng s n progress, the button label changes from Start to Stop ; Users can manually stop recordng whle t s beng progressed. Make sure to select Contnuous as the recordng type and clck the Apply button to enable nstant recordng. When the recordng s complete, The Download button wll appear on rghtmost sde; Clck the button whether to run or save the recorded vdeo. When you clck the Save button, the recorded vdeo wll be saved n the SD card as an AVI fle format unless the path to save n local PC s defned A 80

81 Event Recordng wll appear lke below. The events are recorded to an SD card wth AVI fle format. Event mode enables ntermttent recordng when there s an event such as ntruson or any other specfc occason. When you select Event n Recordng Type, the menus for the confguraton of event recordng wll appear lke below. The events are recorded to an SD card wth AVI fle format. Recordng storage Optons Select the desred storage devce type (SD card or FTP server wth SD card) for event recordng. Recordng Settng - Recordng resource Select the resources to be ncluded n recordng : Vdeo, Audo, VCA meta and MD meta data. - Recordng hold off tme Specfy the recordng tme to avod other events durng the recordng hold off tme. Stream source Users may choose prmary recordng source from ether frst stream or second stream. If t s a sngle stream, the second stream opton s unavalable. SD card s automatcally recycled for event recordng. The number of events to be recorded s lmted to 80,000 no matter how much the total space of SD card s, and the SD card wll be overwrtten when the event reaches 80, A 81

82 Contnuous To search and download fles for contnuous recordng, go to Setup > Storage > Contnuous. All of the recorded fles are lsted wth maxmum 40 fles per page and the most recent fles on the top. Users can search for a fle to download by usng the Search box wrth a calendar and Clck [Download] whether to play or download t. Currently reordng fle s dsplayed as [Recordng] on the download Column VCA For the detals of VCA, refer to the VCA Manual Perpheral Sensor/Alarm To confgure the dgtal nput and output to control external devces such as sensors or alarms, go to Setup > Perpheral > Sensor/Alarm. The confguraton can be extended dependng on the number of the sensor or alarm that the devce supports. Please refer to the product user gude to know more about the electrcal characterstc of these ports A 82

83 Sensor (DI) Confguraton Resource type Select the type of sensor module. It can be ether voltage [maxmum 5 volts] or relay. Trgger type Select type Normally open or Normally closed. Detecton type Select your deal detecton type between Edge trgger and Level trgger. - Edge trgger : You can select ths detecton type f you need to detect DI sgnals at the moment that DI sgnal s at the rsng edge and the fallng edge. - Level trgger : You can select ths detecton type f you need to detect DI sgnals throughout the tme that DI sgnal s mantaned. Interval between trggers Ths menu s avalable only when you select Edge trgger as the sensor s detecton type. Set the detecton nterval for event generaton frequency. For example, f you nput 0, t generates an event whenever DI s actvated. When the value s set to 10, then only one event wll be trggered every 10 seconds even f multple DI events are detected wthn 10 seconds. The nterval range s from 0 to 600 seconds. Duraton Ths feature s avalable only when you select Edge trgger as the sensor s detecton type. Ths functon can be used when a DI s combned wth other events. Settng duraton vrtually extends the nterval to make the combned several events wthn the same tme frame to trgger an alarm. The duraton has a range of 0 ~ 600 seconds. Alarm (DO) confguraton Alarm Control Select Actve or Inactve for alarm. Detecton type Select your deal detecton type between Edge trgger and Level trgger. - Edge trgger : You can select ths detecton type f you need to detect DO sgnals at the moment that DO sgnal s at the rsng edge and the fallng edge. - Level trgger : You can select ths detecton type f you need to detect DO sgnals throughout the tme that DO sgnal s mantaned. Interval between trggers Ths menu s avalable only when you select Edge trgger as the alarm s detecton type. Set the detecton nterval for event generaton frequency. For example, f you nput 0, t generates events whenever DO s actve or nactve. When the value s set to 10, then only one event wll be trggered every 10 seconds even f multple DO events are detected wthn 10 seconds. Duraton Ths menu s avalable only when you select Edge trgger as the alarm s detecton type. Ths functon can be used when a DO s combned wth other events. Settng duraton vrtually extends the nterval to make the combned several events wthn the same tme frame to trgger an alarm. The duraton has a range of 0 ~ 600 seconds A 83

84 PIR : Ths part s for the camera wth passve nfrared (PIR) sensor only. Passve nfrared sensor (PIR sensor) s a moton detector that senses object s radatng nfrared (IR) lght n ts feld of vew. Users can confgure the sensor detecton ntervals by accessng Setup > Perpheral > PIR. The avalable ntervals range from o to 600 seconds Seral Port For the USRT settng, go to Setup > Perpheral > Seral Port. The Seral port settng page may not appear dependng on a devce type. Seral port setup These settngs are necessary to allow the telecommuncaton between your seral devces and encoder/ip camera. There are default values set for a new devce but t can be changed dependng upon the devce requrement. Seral port mode - Seral Port (RS485): Ths s used when you want to control a PTZ camera or the seral devce wth the selected PTZ protocol embedded n a devce. For detaled nformaton on the embedded protocols, please see Protocols. - SeralOverIP: Used to enable the communcaton for the devces connected to the seral ports of an encoder SeralOverIP Ths secton s enabled only when you select SeralOverIP for the seral port mode. Select the desred communcaton mode: UDP, TCP Clent, or TCP Server. Once the mode has been selected, type the IP address of clent and port number n the text boxes of SeralOverIP secton A 84

85 If you select the TCP Clent or TCP Server mode, you can set the tme to end the connecton automatcally when there s no data comng from a clent PC to the encoder n a specfed tme. Ths feature s provded to detect an abnormal closure of the socket or LAN cable dsconnecton. Input the desred tme n the tmeout text box. The Status box ndcates the connecton status n the TCP Clent or TCP Server mode. Refer to the followng table and check how the message appears accordng to a connecton status. Status Message for TCP Clent Message for TCP Server Not Connected Connectng Dsconnected Connected Connected Connected The Tmeout and Status opton are avalable only n the TCP Clent and TCP Server mode. The mode for the seral port s selected as SeralOverIP, the menus n Setup>PTZ>Protocol wll be deactvated. Lkewse, the menus n SeralOverIP are deactvated when the mode s selected as PTZ. You can check the communcaton status from the clent PC by usng a related freeware. If you run the program and connect to a devce va ts IP address and port number, you can see that the data transferred from the port s receved at the seral port PTZ settngs PTZ - Auto flp : If Enable ths opton, the PTZ camera wll Flp mage when moves more than 90 degree automatcally - Dgtal zoom : If Enable ths opton, the zoom functon wll be enhanced on the bass of default maxmum capacty Tourng A 85

86 Confgure the Tourng 1. Select the Tourng number from 1 to 6 to defne. 2. Select the Preset number to add. 3. Select the Interval n second whch stops at. 4. Clck Add. 5. Repeat from step 2 to step 4 for addng the Preset. 6. Clck the Apply to save changes. Users can check the confgured tourng by clckng the Vew button. To reset Tourng, select the desred Tourng Number and then clck Remove Autorun When there s no operaton on PTZ durng a specfc perod n mnute, the operaton confgured n the Autorun menu s called automatcally Protocols Protocols confguraton allows users to set the PTZ protocols and the PTZ address. Avalable protocols are; TBT(T-Pro), Amercan Dynamcs, Bosch, CDC, Elbex, JVC, Kalatel(asc), Panasonc (CS850), Pelco-d(probe), Pelco-d, Pelco-p, Convex, and Samsung A 86

87 5.9. Mantenance Users To create/remove/modfy a user group, go to Setup > Mantenance or Basc Confguraton > Users. How to add a user To add a user for the webpage, 1. Go to Setup > Mantenance or Basc Confguraton > Users. 2. Clck Add below the User Lst. 3. When the pop-up wndow appears, type a user name and password. Lmtaton on user name User name must begn wth an Englsh alphabet letter. Length: The length of user name must be between 4 and 32. Accepted characters : All upper or lower case alphabet letters from a through z, numbers from 0 to 9, and underscore _. Allowed length of user name vares dependng on the frmware verson. The verson lower than allows the length between 3 and 32. Lmtaton on password Length: The length of password must be between 4 and 32. Accepted characters : All upper or lower case alphabet letters from a through z and numbers from 0 to 9 The maxmum length of password vares dependng on the frmware verson. The verson lower than allows the length between 4 and Select a User Group for the new added user. The users wth Vewer/Operator prvlege can only access Lve Page. 5. Clck Apply to save the changes. 6. Check f the user name s added to the User lst A 87

88 User Authentcaton Enable or dsable for anonymous vewer to connect Lve page. How to modfy a user To change your password or user name, 1. Go to Setup > Mantenance or Basc Confguraton > Users. 2. On the User Lst, hghlght user name. 3. Clck the Modfy button below the User Lst. 4. When the pop-up wndow appears, type the new password. 5. Re-type the same password agan on the Confrm password text box. 6. Clck Apply to save the changes. Once the user name s set, t cannot be modfed. Smply remove the user name and add a new user wth desred name. How to remove a user To remove a user name form the User Lst, 1. Go Setup > Mantenance or Basc Confguraton > Users. 2. Select the user name to remove on the User Lst. 3. Clck the Remove button below the User Lst. 4. When the dalog box appears to confrm your request, clck the OK button. 5. Check f the user name s removed from the lst on the page A 88

89 Date & Tme Tme settng s very sgnfcant for all parts of the product server because t affects the log of streamng and burnt-n text of vdeo. To confgure the date and tme, go to Setup > Mantenance or Basc Confguraton > Date & Tme. Current Camera/Encoder Tme It shows the camera s recognzed tme. Confguraton Tme zone Select the proper tme zone of where the camera s nstalled from the drop-down box. Daylght savng tme apples automatcally. Sync source Tme on the devce s bascally synchronzed wth Real Tme Clock (RTC) every mdnght or when the devce boots unless NTP server s selected. - NTP server : Check the check box of NTP server f you want to synchronze the devce tme wth the NTP server. Then, the system would synchronze the clock on the devce wth the NTP server every mdnght or when the camera boots. Users can confgure up to four avalable NTP servers at Setup > Network Confguraton > NTP. The frst top on the lst s the default source of the tme (tme.wndows.com). Date and tme format Select the desred date and tme format from the drop-down lst box. New camera/encoder tme Select one of 3 optons: Synchronze the camera/encoder tme wth current clent system tme Synchronze the camera/encoder tme wth NTP server Set the camera/encoder tme manually A 89

90 API To actvate the thrd party APIs or Onvf protocol, go to Setup > Mantenance > API. Enable Genetec Protocols of Omncast s supported. Camera s FW V1.8 or below - Genetec protocol V1.55 Camera s FW V1.9 or above - Genetec Protocol V1.74 Enable ONVIF ONVIF s supported. - Enable authentcaton: Ths functon asks users to type IP and Password. Enable replay attack protecton: Ths renforces authentcaton by preventng replay attack. - Enable profle G: Ths functon enables devces to support ONVIF profle G Language Englsh, Korean and Chnese are supported n the Web nterface, wth Englsh as the default language A 90

91 Frmware Upgrade To update frmware, go to Setup > Mantenance > Frmware Upgrade and follow the drectons below. Frmware update va the tool To enable the frmware update va the IPAdmnTool.exe, hghlght the devce to upgrade the frmware, and clck Update button. Then, the FWUpdate wndow appears where users can set multple devces to upgrade smultaneously. Refer to the IPAdmnTool User s Manual.pdf for the detals how to update the frmware on your devces by usng ths tool. Frmware update on the web browser To update the frmware on the web browser, clck Browse button and search the frmware fle. If you select the fle to upload, the Upload button appears next to the Browse button. Clck the Upload button to update the frmware. Frmware update usng ONVIF protocol To update the frmware usng the Onvf protocol, please turn on Enable Onvf at Setup > Mantenance > API.! Cauton Remnd that the process of frmware update should not be nterrupted. If the update process s nterrupted(such as by a power outage), the devce wll go nto safety mode A 91

92 System Log To download system log, go to Setup > Mantenance > System Log and follow the drectons as below. Clck Download System Log, and save or open the fle when the fle download dalog box wll appear lke below. FTP Log Backup Mode - Enable auto backup: Tckng the checkbox enables automatc backup to the FTP server confgured under FTP Log Backup Confguraton. - Backup: Clckng the button enables users to backup system logs to the clent PC. FTP Log Backup Confguraton Ths s a secton to set up FTP confguraton to enable automatc backup of system logs. Show notfcaton lst Clckng the button shows all avalable FTP notfcaton lst at the bottom. Load notfcaton nto settng Clckng Load notfcaton nto settng wll copy pre-defned FTP server nformaton n FTP Notfcaton Lst under Event Confguraton nto FTP Log Backup Confguraton A 92

93 Confguraton Import/Export For backup or apply same settngs to other devce purposes, confguraton fle can be mported or exported. Setup > Mantenance > Confguraton Import/Export Clck Export to save latest settngs as a fle. Wthn few second, the web wll ask a user to save or open the confgure.dat fle. To overwrte latest settngs, clck Browse, and load the confgure.dat fle, and clck Import. * The Import button wll appear next to the Search button once a fle to be mported s loaded Reset All Settngs All nformaton s ntalzed except user, network and tme zone. To reset the system settng to the factory default settng, go to Setup > Mantenance > Reset All Settng and follow the drectons below. 1. The checkboxes of network settngs, user account nformaton and tme zone settng are pre-selected. Thus, make sure to select only the tems you ntend to preserve from the ntalzaton. 2. Clck Reset All settngs, and then the dalog box appears as follows. 3. Clck OK to reset all settngs. 4. The reboot starts automatcally. Then, count for 120 seconds after Intalzng.. dsplays. 5. Check f all the settngs are returned to the factory default values A 93

94 Reboot To reboot the system on the web browser, go to Setup > Mantenance > Reboot. Clck Reboot button to reboot the devce Actvaton To actvate the VCA lcense for the devce, go to Setup > Actvaton. < How to actvate the lcense > 1. Input the actvaton code receved. 2. Clck Apply. Then, the nstalled lcense and the hardware code wll appear on the actvaton page f the actvaton code s vald A 94

95 5.11. About Informaton To fnd the product nformaton ncludng the hardware specfcaton and software verson, go to Setup > About > Informaton Lcense To fnd the lcense nformaton of the open source software that s used n the camera/encoder A 95

96 APPENDIX(A) : ENCODERS Ths appendx structurally conssts of two dfferent categores, whch are Lve and Setup, and t covers encoders dfferent features from cameras. Thus, you may refer to the rest parts of ths manual f you need to learn about the features whch are the same as n cameras. Lve PTZ Control <PTZ Controller> Pressng the allow at the bottom of the PTZ controller expands the menu lke the mage on the rght. <PTZ Camera s OSD menu on encoder s lve vew> If you want to use the features of PTZ movement wth the speed control and preposton (preset), you may use the features under the sectons of Movement, Speed, and Pre Poston by reference to PTZ tab n 3.2. Lve Page Menus, or you may use the upper two menus on the PTZ controller. The PTZ controller may pop up by clckng the Show button under the PTZ Control bar, and the confguraton method of PTZ movement and preset on the PTZ controller s the same as the confguraton method on the PTZ tab. However, when you consder controllng the features va the analogue PTZ camera s OSD menu and usng addtonal features, you can start off clckng the Menu Off button to load OSD menu on Lve Vew. - Menu Off(On): Press ths button to load the camera s OSD menu on Lve Vew. NOTE: The actual states between the camera s OSD n Lve Vew and the Menu Off(On) button may not be matched each other. - Arrow buttons (PTZ tab/osd Controller): Press the buttons accordng to your ntenton to move between the OSD menus on Lve Vew. - Enter: Press ths button when you enter OSD menu or execute the selected OSD menu. - Clear: Press ths button when you want to ext from the current OSD menu. - Scan: Confgure a profle of Scan va the Auto Scan menu under the OSD man menu. Then, ext from the OSD menu, press the number button correspondng to the confgured Scan number on the PTZ controller, and press the Scan button to start Scan A 96

97 - Tour: Confgure a profle of Tour va the Tour menu under the OSD man menu. Then, ext from the OSD menu, press the number button correspondng to the confgured Tour number on the PTZ controller, and press the Tour button to start Tour. NOTE: Presets must have been confgured to set Tour. - Pattern: Confgure a profle for Pattern va the Pattern menu under the OSD man menu. Then, ext from the OSD menu, and press the Pattern button to start Pattern. The addtonal PTZ Control on the webpage appears only for the encoders connected to analogue cameras The buttons of Menu Off(On), Enter, Clear, Scan, Tour and Pattern may not work dependng on the each PTZ protocol type. If the buttons do not work, use the buttons approprately by reference to your camera s PTZ protocol manual. Setup Vdeo-In Ths part s correspondng to Camera (Channel namng/vdeo format/color control) n Vdeo and Audo. Only the dfferent features from cameras wll be covered on ths part. For the other common features, refer to Camera (channel namng/vdeo format/color control). Vdeo Standard Format Ths ndcates the current vdeo standard format that s confgured by the hardware swtch. Please see the nstallaton gude of the correspondng devce for more detaled nformaton. Vertcal/Horzontal Delay If the mages from camera do not ft nto the screen vew, users have an opton to adjust the A 97

98 mage poston vertcally or horzontally to ft mages nto screen. For PAL, the range of vertcal delay s from 2 to 128, and the range of horzontal delay s from 5 to 128. For NTSC, the range of horzontal delay s from 2 to 128, and the range of horzontal delay s 2 to 128. For PAL, the default value for vertcal delay s 24 and horzontal delay s 10. For NTSC, the default value for vertcal delay s 18 and horzontal delay s 15. Vertcal Horzontal Mn Default Max Mn Default Max PAL NTSC Hgh Performance Image Processng Selectng Enable De-nterlace wll execute the encoder to merge even felds and odd felds to dsplay a hgh performance level mage streamng. Encoder Profle Ths part s correspondng to Stream Confguraton n Encoder profle. Only the dfferent features from cameras wll be covered on ths part. For the other common features for stream confguraton, refer to Encoder profle. Resoluton The supported resoluton n pxels for the current stream profle s lsted on the drop down box. Select the desred resoluton. NTSC D1 (720x480) 4CIF (704x480) 2CIF (704x240) VGA (640x480) CIF (352x240) QVGA (320x240) QCIF (176x120) Encoders PAL D1 (720x576) 4CIF (704x576) 2CIF (704x288) VGA (640x480) CIF (352x2288) QVGA (320x240) QCIF (176x120) For decent mage qualty, the recommended btrate range for the resoluton D1 s from 512Kbps to 2Mbps. If the settng value for the frame per second drops, the recommended btrate range wll also comparatvely drop. Maxmum FPS Defne the desred frame rate per second. The max frame rate s 25 when the vdeo standard format s PAL. For NTSC, the maxmum frame rate s 30. GOP Ths parameter defnes the length of the group of pctures. If ths value s set to 1, the vdeo stream wll only have one I-frame. Keep ths value hgh to mnmze bandwdth. The max GOP sze s 25 when the vdeo standard format s PAL. For NTSC, the maxmum GOP sze s 30. Vdeo-Out A 98

99 Ths part s correspondng to Vdeo-out n Vdeo-Out. Only the dfferent features from cameras wll be covered on ths part. For the other common features, refer to Camera. Select one between Loop-back and DAC optons, and clck Apply button. - Loop-back : In ths mode, the sgnal wll be streamed out wthout nternal processng or modfcaton. - DAC : In ths mode, the sgnal wll be streamed out wth some modfcaton whch s applcable when you use Burnt-n Text or Burnet-n Annotaton functon. Informaton A 99

100 Ths part s correspondng to Informaton n About. There s some addtonal nformaton on the nformaton page n case the devce s a blade card, or an encoder, or a rack. Module ID appears f the devce s an encoder havng a module ID. Rack nformaton appears f the devce s a rack. The rack nformaton shows a seres of numbers wth hyper-text, whch ndcates rack number, blade number, and module number n a row. Clckng the hyper-text wll brng a pop up wndow to dsplay addtonal nformaton as follows. - Temperature - Input power status - Fan status Clckng Renew shows updated nformaton A 100