the machine and check the components Drum Unit and Toner Cartridge Assembly (pre-installed) AC Power Cord Installer CD-ROM Quick Setup Guide

Transcription

1 Quik Setup Guide Strt Here MFC-8510DN Thnk you for hoosing Brother, your support is importnt to us nd we vlue your usiness. Your Brother produt is engineered nd mnuftured to the highest stndrds to deliver relile performne, dy-in nd dy-out. Plese red the Produt Sfety Guide first, then red this Quik Setup Guide for the orret setup nd instlltion proedure. To view the Quik Setup Guide in other lnguges, plese visit 1 Unpk the mhine nd hek the omponents Drum Unit nd Toner Crtridge Assemly (pre-instlled) Produt Registrtion Sheet (USA only) AC Power Cord Instller CD-ROM Quik Setup Guide Telephone Line Cord Produt Sfety Guide Bsi User's Guide USA/CAN Version 0 1

2 WARNING CAUTION WARNING indites potentilly hzrdous sitution whih, if not voided, ould result in deth or serious injuries. CAUTION indites potentilly hzrdous sitution whih, if not voided, my result in minor or moderte injuries. WARNING Plsti gs re used in the pking of your mhine. Plsti gs re not toys. To void the dnger of suffotion, keep these gs wy from ies nd hildren nd dispose of them orretly. When moving the mhine, grsp the side hndholds firmly from the front of the mhine. The side hndholds re loted under the snner. DO NOT rry the mhine y holding it t the ottom. Keep minimum gp round the mhine s shown in the illustrtion in. (400 mm) 6.00 in. (150 mm) 6.00 in. (150 mm) 6.00 in. (150 mm) The omponents inluded in the ox my differ depending on your ountry. We reommend tht you sve the originl pkging. If for ny reson you must ship your mhine, refully repk the mhine in the originl pkging to void ny dmge during trnsit. The mhine should e dequtely insured with the rrier. For how to repk the mhine, see Pking nd shipping the mhine in the Advned User's Guide. The interfe le is not stndrd essory. Buy the pproprite interfe le for the onnetion you wnt to use (USB or Network). USB le It is reommended to use USB 2.0 le (Type A/B) tht is no longer thn 6 feet (2 meters). DO NOT onnet the interfe le t this time. Conneting the interfe le is done during the MFL-Pro Suite instlltion proess. Network le Use stright-through Ctegory 5 (or greter) twisted-pir le for 10BASE-T or 100BASE-TX Fst Ethernet Network. 2

3 2 Remove the pking mteril from the mhine d Tke out the drum unit nd toner rtridge ssemly. Importnt DO NOT onnet the AC power ord yet. Remove the pking tpe from the outside of the mhine nd the film overing the snner glss. Open the MP try, nd remove the pking tpe from the MP try support, then lose the MP try. e Remove the ornge protetive mteril from the drum unit nd toner rtridge ssemly. Press the front over relese utton nd open the front over. Remove the sili gel pk. f Hold the drum unit nd toner rtridge ssemly level with oth hnds nd gently shke it from side to side severl times to distriute the toner evenly inside the rtridge. CAUTION DO NOT et the sili gel pk. Plese throw wy. If ingested, seek medil ttention immeditely. g Put the drum unit nd toner rtridge ssemly firmly k in the mhine. h Close the front over of the mhine. 3

4 3 Lod pper in the pper try Pull the pper try ompletely out of the mhine. d Fn the stk of pper well to void pper jms nd misfeeds. Put the pper in the try nd mke sure: The pper is elow the mximum pper mrk (). Over filling the pper try will use pper jms. The side to e printed on is fe down. The pper guides touh the sides of the pper so it will feed properly. While pressing the green pper-guide relese lever, slide the pper guides to fit the pper size you re loding in the try. Mke sure tht the guides re firmly in the slots. e f Put the pper try firmly k in the mhine. Mke sure tht it is ompletely inserted into the mhine. Lift up the support flp to prevent pper from sliding off the fe-down output try. For Legl or Folio size pper, press the relese utton in the ottom of the pper try nd then pull out the k of the pper try. (Legl or Folio size pper re not ville in some regions.) For more informtion out reommended pper, see Reommended pper nd print medi in the Bsi User's Guide. 4

5 4 Connet the power ord nd telephone line Importnt DO NOT onnet the interfe le yet. Connet the AC power ord to the mhine nd then plug it into n AC power outlet. Turn the mhine's power swith on. WARNING The mhine must e grounded using 3-prong plug. Sine the mhine is grounded through the power outlet, you n protet yourself from potentilly hzrdous eletril onditions on the telephone network y keeping the power ord onneted to your mhine when you onnet it to telephone line. Similrly, you n protet yourself when you wnt to move your mhine y disonneting the telephone line first nd then the power ord. If you re shring one telephone line with n externl telephone, onnet it s shown elow. Before you onnet the externl telephone, remove the protetive p from the EXT. jk on the mhine. Connet the telephone line ord. Connet one end of the telephone line ord to the jk on the mhine mrked LINE nd the other end to modulr wll jk. Extension telephone Externl telephone Protetive p Importnt The telephone line ord MUST e onneted to the jk on the mhine mrked LINE. 5

6 If you re shring one telephone line with n externl telephone nswering mhine, onnet it s shown elow. 5 Choose your lnguge (if needed) Before you onnet the externl telephone nswering mhine, remove the protetive p from the EXT. jk on the mhine. Press Menu, 0, 0. Press or to hoose your lnguge. Press OK. Press Stop/Exit. Extension telephone nswering mhine (not supported) Externl telephone nswering mhine Protetive p Set the reeive mode to Externl TAD if you hve n externl nswering mhine. See Choose the orret Reeive Mode on pge 7. For dditionl detils, see Conneting n externl TAD (telephone nswering devie) in the Bsi User's Guide. 6

7 6 Choose the orret Reeive Mode The orret Reeive Mode is determined y the externl devies nd telephone susrier servies (Voie Mil, Distintive Ring, et.) you hve (or will e using) on the sme line s the Brother mhine. Will you e using Distintive Ring numer for reeiving fxes? Brother uses the term Distintive Ring ut telephone ompnies my hve other nmes for this servie suh s Custom Ringing, RingMster, Personlized Ring, Teen Ring, Ident-A-Cll, nd Smrt Ring. See Distintive Ring in the Bsi User's Guide for instrution on setting up your mhine using this feture. Will you e using Voie Mil on the sme telephone line s your Brother mhine? If you hve Voie Mil on the sme telephone line s your Brother mhine, there is strong possiility tht Voie Mil nd the Brother mhine will onflit with eh other when reeiving inoming lls. See Voie Mil in the Bsi User's Guide for instrutions on setting up your mhine using this servie. Will you e using Telephone Answering Devie on the sme telephone line s your Brother mhine? Your externl telephone nswering devie (TAD) will utomtilly nswer every ll. Voie messges re stored on the externl TAD nd fx messges re printed. Choose Externl TAD s your reeive mode. See the instrutions elow. Will you e using your Brother mhine on dedited fx line? Your mhine utomtilly nswers every ll s fx. Choose Fx Only s your reeive mode. See the instrutions elow. Will you e using your Brother mhine on the sme line s your telephone? Do you wnt to reeive voie lls nd fxes utomtilly? The Fx/Tel reeive mode is used when shring the Brother mhine nd your telephone on the sme line. Choose Fx/Tel s your reeive mode. See the instrutions elow. Importnt : You nnot reeive voie messges on either Voie Mil or n nswering mhine when hoosing the Fx/Tel mode. Do you expet to reeive very few fxes? Choose Mnul s your reeive mode. You ontrol the telephone line nd must nswer every ll yourself. See the instrutions elow. For detils, see Using reeive modes in the Bsi User's Guide. Press Menu, 0, 1. Press or to hoose the reeive mode. Press OK. Press Stop/Exit. 7

8 7 Set the LCD ontrst (if needed) If you re hving diffiulty reding the LCD, try hnging the ontrst setting. Press Menu, 1, 7. 8 Set Press to inrese the ontrst. OR Press d to derese the ontrst. Press OK. Press Stop/Exit. the dte nd time The mhine displys the dte nd time, nd if you set up the sttion ID, the dte nd time will e dded to eh fx you send. Press Menu, 0, 2, 1. Enter the lst two digits of the yer on the dil pd, nd then press OK. 02.Dte&Time Yer:2012 Enter & OK Key (e.g. Enter 1, 2 for 2012.) Enter the two digits for the month on the dil pd, nd then press OK. 02.Dte&Time XX/XX/2012 Month:03 Enter & OK Key (e.g. Enter 0, 3 for Mrh.) d e f g Enter the two digits for the dy on the dil pd, nd then press OK. 02.Dte&Time 03/XX/2012 Dy:25 Enter & OK Key (e.g. Enter 2, 5 for 25th.) Do one of the following: If you wnt to use the 24-hour lok, press or to hoose 24h Clok, nd then press OK. Go to step f. If you wnt to use the 12-hour lok, press or to hoose 12h Clok, nd then press OK. Go to step g. 02.Dte&Time 03/25/ h Clok 24h Clok Selet or OK Enter the time in 24-hour formt on the dil pd, nd then press OK. Go to step i. 02.Dte&Time 03/25/2012 Time:15:25 Enter & OK Key (e.g. Enter 1, 5, 2, 5 for 15:25.) Enter the time in 12-hour formt on the dil pd, nd then press OK. 02.Dte&Time 03/25/2012 Time:03:25 Enter & OK Key (e.g. Enter 0, 3, 2, 5 for 3:25.) 8

9 h i 9 Set Press or to hoose AM or PM, nd then press OK. 02.Dte&Time 03/25/ :25 AM PM Selet or OK (e.g. Choose PM for 3:25 P.M.) Press Stop/Exit. your Sttion ID The mhine displys the dte nd time, nd if you set up the Sttion ID, it will dd it to eh fx you send. Press Menu, 0, 3. d Enter your fx numer (up to 20 digits) on the dil pd, nd then press OK. 03.Sttion ID Fx:_ Enter & OK Key Enter your telephone numer (up to 20 digits) on the dil pd, nd then press OK. (If your telephone numer nd fx numer re the sme, enter the sme numer gin.) 03.Sttion ID Fx:XXXXXXXXXXX Tel:_ Enter & OK Key Use the dil pd to enter your nme (up to 20 hrters), nd then press OK. 03.Sttion ID Fx:XXXXXXXXXXX Tel:XXXXXXXXXXX Nme:_ Enter & OK Key See the following hrt for entering your nme. If you need to enter hrter tht is on the sme key s the lst hrter, press to move the ursor to the right. If you entered hrter inorretly nd wnt to hnge it, press d or to move the ursor to the inorret hrter, then press Cler. e Press key One time Two times Press Stop/Exit. Three times Four times Five times 2 A B C 2 A 3 D E F 3 D 4 G H I 4 G 5 J K L 5 J 6 M N O 6 M 7 P Q R S 7 8 T U V 8 T 9 W X Y Z 9 For more detils, see Entering text in the Bsi User's Guide. If you mke mistke nd wnt to strt gin, press Stop/Exit nd go k to step. (USA only) The Telephone Consumer Protetion At of 1991 mkes it unlwful for ny person to use omputer or eletroni devie to send ny messge vi telephone fx mhine unless suh messges lerly ontin, in mrgin t the top or ottom of eh trnsmitted pge, or on the first pge of the trnsmission, the dte nd time it is sent nd n identifition of the usiness or other entity or other individul sending the messge nd the telephone numer of the sending mhines or suh usiness, other entity or individul. To progrm this informtion into your mhine, see Set the dte nd time on pge 8 nd Set your Sttion ID on pge 9. 9

10 10 Fx Trnsmission Report 12 Set the telephone line omptiility Your Brother mhine is equipped with Trnsmission Verifition Report tht n e used s onfirmtion tht you sent fx. This report lists the nme or fx numer of the reeiving prty, the dte, time nd durtion of the trnsmission, the numer of pges trnsmitted, nd whether or not the trnsmission ws suessful. If you wnt to use the Fx Trnsmission Report feture see Printing reports in the Advned User's Guide. 11 Set tone or pulse diling mode (Cnd only) If you re onneting the mhine to VoIP servie (over the Internet) you need to hnge the omptiility setting. Press Menu, 2, 0, 1. Press or to hoose Bsi(for VoIP). If you re using n nlog telephone line you n skip this step. Press OK. Press Stop/Exit. Your mhine omes set for Tone diling servie. If you hve Pulse diling servie (rotry), you need to hnge the diling mode. Press Menu, 0, 4. Press or to hoose Pulse (or Tone). Press OK. Press Stop/Exit. 10

11 13 Dil Prefix 14 Automti Dylight Sving Time The dil prefix setting will utomtilly dil predefined numer efore every fx numer you dil. For exmple: If your phone system requires 9 to dil n outside numer this setting will utomtilly dil 9 for every fx you send. Press Menu, 0, 5. (For Cnd, press Menu, 0, 6.) Enter the prefix numer (up to 5 digits) on the dil pd, nd then press OK. You n use the numers 0 to 9, #, l nd!. (Press Hook to disply!.) You nnot use! with ny other numers or hrters. If your telephone system requires timed rek rell (hookflsh), press Hook to enter the rek. If the pulse diling mode is on, # nd l re not ville to use. (Cnd only) Press Stop/Exit. You n set the mhine to hnge utomtilly for Dylight Sving Time. It will reset itself forwrd one hour in the Spring nd kwrd one hour in the Fll. Press Menu, 0, 2, Press or to hoose On (or Off). Press OK. Press Stop/Exit. Set the Time Zone You n set the time zone (not summer time ut stndrd time) on the mhine for your lotion. For exmple, the time zone for Estern Time in the USA nd Cnd is UTC-05:00. Press Menu, 0, 2, 3. Press or to hoose the time zone. Press OK. Press Stop/Exit. 11

12 16 Send in the Produt Registrtion nd Test Sheet (USA only) You n lso register your produt online using the On-Line Registrtion link from the instller CD-ROM or visit Fill out the Produt Registrtion nd Test Sheet. Put the sheet fe up in the ADF (Automti Doument Feeder) or fe down on the snner glss. Mke sure (FAX) is illuminted in Blue. d Enter the toll-free fx numer: e Press Strt. You will reeive onfirmtion fx of your Produt Registrtion. 12

13 17 Choose your onnetion type These instlltion instrutions re for Windows XP Home/Windows XP Professionl, Windows XP Professionl x64 Edition, Windows Vist, Windows 7, nd M OS X (versions , 10.6.x nd 10.7.x). For Windows Server 2003/2003 x64 Edition/2008/2008 R2 nd Linux, visit your model pge t You n visit us t where you n get produt support, the ltest driver updtes nd utilities, nd nswers to frequently sked questions (FAQs) nd tehnil questions. For USB Interfe Users Windows, go to pge 14 Mintosh, go to pge 16 For Wired Network Windows, go to pge 18 Mintosh, go to pge 21 Wired Network Windows USBMintosh Windows Mintosh 13

14 USB Windows For USB Interfe Users (Windows XP/XP Professionl x64 Edition/Windows Vist / Windows 7) 18 Before you instll 19 Instll MFL-Pro Suite Mke sure tht your omputer is ON nd you re logged on with Administrtor rights. Importnt If there re ny progrms running, lose them. The sreens my differ depending on your operting system. The instller CD-ROM inludes Nune PperPort 12SE. This softwre supports Windows XP (SP3 or greter), XP Professionl x64 Edition (SP2 or greter), Windows Vist (SP2 or greter) nd Windows 7. Updte to the ltest Windows Servie Pk efore instlling MFL-Pro Suite. Turn off the mhine nd mke sure the USB interfe le is NOT onneted to the mhine. If you hve lredy onneted the le, disonnet it. Put the instller CD-ROM into your CD-ROM drive. If the model nme sreen ppers, hoose your mhine. If the lnguge sreen ppers, hoose your lnguge. If the Brother sreen does not pper utomtilly, go to My Computer (Computer), doule-lik the CD-ROM ion, nd then doule-lik strt.exe. Clik Instll MFL-Pro Suite, nd lik Yes if you ept the liense greements. If the instlltion does not ontinue utomtilly, open the top menu gin y ejeting nd then reinserting the CD-ROM or doule-lik the strt.exe progrm from the root folder, nd ontinue from step to instll MFL-Pro Suite. For Windows Vist nd Windows 7 users, when the User Aount Control sreen ppers, lik Allow or Yes. Choose Lol Connetion (USB) nd then lik Next. If you wnt to instll the PS driver (BR-Sript3 printer driver), hoose Custom Instll nd then follow the on-sreen instrutions. 14

15 USB Windows d Follow the on-sreen instrutions until this sreen ppers. 20 Finish nd restrt Clik Finish to restrt your omputer. After restrting the omputer, you must log on with Administrtor rights. e f Connet the USB le to the USB port mrked with the symol on your mhine nd then onnet the le to your omputer. Turn the mhine on. The instlltion will utomtilly ontinue. The instlltion sreens pper one fter nother. If prompted, follow ny on-sreen instrutions. Importnt DO NOT nel ny of the sreens during the instlltion. It my tke few seonds for ll sreens to pper. If n error messge ppers during the softwre instlltion, run the Instlltion Dignostis loted in Strt/All Progrms/Brother/MFC-XXXX (where MFC-XXXX is your model nme). Depending on your seurity settings, Windows Seurity or ntivirus softwre window my pper when using the mhine or its softwre. Plese llow or permit the window to ontinue. Finish The instlltion is now omplete. XML Pper Speifition Printer Driver The XML Pper Speifition Printer Driver is the most suitle driver for Windows Vist nd Windows 7 when printing from pplitions tht use the XML Pper Speifition. Plese downlod the ltest driver y essing the Brother Solutions Center t Windows USBMintosh g h For Windows Vist nd Windows 7 users, when the Windows Seurity sreen ppers, lik the hek ox nd lik Instll to omplete the instlltion orretly. When the On-Line Registrtion sreen ppers, mke your seletion nd follow the on-sreen instrutions. One you hve ompleted the registrtion proess, lik Next. When the Setup Complete sreen ppers, hek the ox of the tion you wnt to perform, nd then lik Next. 15

16 USB Mintosh For USB Interfe Users (M OS X x) 18 Before you instll 19 Instll MFL-Pro Suite Mke sure your mhine is onneted to the power nd your Mintosh is ON. You must e logged on with Administrtor rights. Importnt For users of M OS X or lower, upgrde to M OS X x. (For the ltest drivers nd informtion for the M OS X you re using, visit Put the instller CD-ROM into your CD-ROM drive. Doule-lik the Strt Here OSX ion. If prompted, selet your model nd then follow the on-sreen instrutions. If you wnt to dd the PS driver (BR-Sript3 printer driver), plese go to the Brother Solutions Center t nd visit FAQ's on your model pge for instrutions. Connet the USB le to the USB port mrked with the symol on your mhine nd then onnet the le to your Mintosh. Importnt DO NOT nel ny of the sreens during the instlltion. It my tke few minutes for the instlltion to omplete. Choose your mhine from the list, nd then lik OK. Mke sure your mhine's power swith is on. d When this sreen ppers, lik Next. The instlltion of MFL-Pro Suite is now omplete. Go to step 20 on pge

17 USB Mintosh 20 Downlod nd instll Presto! PgeMnger When Presto! PgeMnger is instlled OCR pility is dded to Brother ControlCenter2. You n esily sn, shre nd orgnize photos nd douments using Presto! PgeMnger. On the Brother Support sreen, lik Presto! PgeMnger nd follow the on-sreen instrutions. Finish The instlltion is now omplete. Windows USBMintosh 17

18 Wired Network Windows For Wired Network Interfe Users (Windows XP/XP Professionl x64 Edition/Windows Vist / Windows 7) 18 Before you instll Connet the network interfe le to the Ethernet port nd then onnet it to free port on your hu. Mke sure tht your omputer is ON nd you re logged on with Administrtor rights. Importnt If there re ny progrms running, lose them. The sreens my differ depending on your operting system. d Mke sure your mhine's power swith is on. The instller CD-ROM inludes Nune PperPort 12SE. This softwre supports Windows XP (SP3 or greter), XP Professionl x64 Edition (SP2 or greter), Windows Vist (SP2 or greter) nd Windows 7. Updte to the ltest Windows Servie Pk efore instlling MFL-Pro Suite. Disle ll personl firewll softwre (other thn Windows Firewll), nti-spywre or ntivirus pplitions for the durtion of the instlltion. Remove the protetive p from the Ethernet port mrked with symol. 19 Instll MFL-Pro Suite Put the instller CD-ROM into your CD-ROM drive. If the model nme sreen ppers, hoose your mhine. If the lnguge sreen ppers, hoose your lnguge. If the Brother sreen does not pper utomtilly, go to My Computer (Computer), doule-lik the CD-ROM ion, nd then doule-lik strt.exe. Clik Instll MFL-Pro Suite, nd lik Yes if you ept the liense greements. If the instlltion does not ontinue utomtilly, open the top menu gin y ejeting nd then reinserting the CD-ROM or doule-lik the strt.exe progrm from the root folder, nd ontinue from step to instll MFL-Pro Suite. For Windows Vist nd Windows 7 users, when the User Aount Control sreen ppers, lik Allow or Yes. 18

19 Wired Network Windows Choose Wired Network Connetion (Ethernet) nd then lik Next. If you wnt to instll the PS driver (BR-Sript3 printer driver), hoose Custom Instll nd then follow the on-sreen instrutions. If prompted, hoose your mhine from the list, nd then lik Next. If your mhine is not found over the network, onfirm your settings y following the on-sreen instrutions. If there is more thn one of the sme model onneted on your network, the IP Address nd Node Nme will e displyed to help you identify the mhine. You n find your mhine s IP ddress nd the node nme y printing out the Network Configurtion Report. See Print the Network Configurtion Report on pge 23. For Windows Vist nd Windows 7 users, when the Windows Seurity sreen ppers, lik the hek ox nd lik Instll to omplete the instlltion orretly. d When the Firewll/AntiVirus deteted sreen ppers, hoose Chnge the Firewll port settings to enle network onnetion nd ontinue with the instlltion. (Reommended) nd lik Next. e If you re not using the Windows Firewll, see the user s guide for your softwre for informtion on how to dd the following network ports. For network snning, dd UDP port For network PC-Fx reeiving, dd UDP port If you still hve troule with your network onnetion, dd UDP port 161 nd 137. The instlltion will utomtilly ontinue. The instlltion sreens pper one fter nother. If prompted, follow ny on-sreen instrutions. Importnt DO NOT nel ny of the sreens during the instlltion. It my tke few seonds for ll sreens to pper. f g 20 When the On-Line Registrtion sreen ppers, mke your seletion nd follow the on-sreen instrutions. One you hve ompleted the registrtion proess, lik Next. When the Setup Complete sreen ppers, hek the ox of the tion you wnt to perform, nd then lik Next. Finish nd restrt Clik Finish to restrt your omputer. After restrting the omputer, you must log on with Administrtor rights. If n error messge ppers during the softwre instlltion, run the Instlltion Dignostis loted in Strt/All Progrms/Brother/MFC-XXXX LAN (where MFC-XXXX is your model nme). Depending on your seurity settings, Windows Seurity or ntivirus softwre window my pper when using the mhine or its softwre. Plese llow or permit the window to ontinue. Wired Network Windows Mintosh 19

20 Wired Network Windows 21 Instll MFL-Pro Suite on dditionl omputers (if needed) If you wnt to use your mhine with multiple omputers on the network, instll MFL-Pro Suite on eh omputer. Go to step 19 on pge 18. Network liense (Windows ) This produt inludes PC liense for up to 5 users. This liense supports the instlltion of the MFL-Pro Suite inluding Nune PperPort 12SE on up to 5 PCs on the network. If you wnt to use more thn 5 PCs with Nune PperPort 12SE instlled, plese purhse the Brother NL-5 pk whih is multiple PC liense greement pk for up to 5 dditionl users. To purhse the NL-5 pk, ontt your uthorized Brother deler or ontt Brother ustomer servie. Finish The instlltion is now omplete. XML Pper Speifition Printer Driver The XML Pper Speifition Printer Driver is the most suitle driver for Windows Vist nd Windows 7 when printing from pplitions tht use the XML Pper Speifition. Plese downlod the ltest driver y essing the Brother Solutions Center t 20

21 Wired Network Mintosh For Wired Network Interfe Users (M OS X x) 18 Before you instll 19 Instll MFL-Pro Suite Mke sure your mhine is onneted to the power nd your Mintosh is ON. You must e logged on with Administrtor rights. Importnt For users of M OS X or lower, upgrde to M OS X x. (For the ltest drivers nd informtion for the M OS X you re using, visit Put the instller CD-ROM into your CD-ROM drive. Doule-lik the Strt Here OSX ion. If prompted, selet your model nd then follow the on-sreen instrutions. If you wnt to dd the PS driver (BR-Sript3 printer driver), plese go to the Brother Solutions Center t nd visit FAQ's on your model pge for instrutions. Remove the protetive p from the Ethernet port mrked with symol. Importnt DO NOT nel ny of the sreens during the instlltion. It my tke few minutes for the instlltion to omplete. Choose your mhine from the list, nd then lik OK. Connet the network interfe le to the Ethernet port nd then onnet it to free port on your hu. If your mhine is not found over the network, onfirm your network settings. See Before you instll on pge 21. Wired Network Windows Mintosh d Mke sure your mhine's power swith is on. 21

22 Wired Network Mintosh You n find your mhine s MAC Address (Ethernet Address) nd IP Address y printing out the Network Configurtion Report. See Print the Network Configurtion Report on pge 23. If this sreen ppers lik OK. 1) Enter nme for your Mintosh in Disply Nme (up to 15 hrters long). 2) If you wnt to use the mhine s SCAN key to sn over the network, you must hek the Register your omputer with the "Sn To" funtion on the mhine ox. 3) Clik OK. Go to d. 20 Downlod nd instll Presto! PgeMnger When Presto! PgeMnger is instlled OCR pility is dded to Brother ControlCenter2. You n esily sn, shre nd orgnize photos nd douments using Presto! PgeMnger. On the Brother Support sreen, lik Presto! PgeMnger nd follow the on-sreen instrutions. 21 Instll MFL-Pro Suite on dditionl omputers (if needed) d The nme you enter will pper on the mhine s LCD when you press (SCAN) nd hoose sn option. (For more informtion, see Network Snning (For network models) in the Softwre User's Guide.) When this sreen ppers, lik Next. If you wnt to use your mhine with multiple omputers on the network, instll MFL-Pro Suite on eh omputer. Go to step 19 on pge 21. Finish The instlltion is now omplete. The instlltion of MFL-Pro Suite is now omplete. Go to step 20 on pge

23 For Network Users We Bsed Mngement (we rowser) The Brother print server is equipped with we server tht llows you to monitor its sttus or hnge some of its onfigurtion settings, using HTTP (Hyper Text Trnsfer Protool). We reommend Windows Internet Explorer 7.0/8.0 or Firefox 3.6 for Windows nd Sfri 4.0/5.0 for Mintosh. Plese lso mke sure tht JvSript nd ookies re lwys enled in whihever rowser you use. To use we rowser, you will need to know the IP ddress of the print server. The IP ddress of the print server is listed on the Network Configurtion Report. Open your rowser. Type s IP ddress/ into your rowser s ddress r (where mhine s IP ddress is the IP ddress of the Brother mhine or the print server nme). For exmple: Print the Network Configurtion Report You n print the Network Configurtion Report to onfirm the urrent network settings. Turn on the mhine nd wit until the mhine is in the Redy stte. Press Menu, 6, 5. Press Strt. d The mhine will print the urrent network settings. Press Stop/Exit. Restore the network settings to the ftory defult To restore ll network settings of the internl Print/Sn server to the ftory defult, plese follow the steps elow. Mke sure the mhine is not operting, then disonnet ll the les from the mhine (exept the power ord). Press Menu, 7, 0. d Press 1 to hoose Reset. Press 1 to hoose Yes. The mhine will restrt, re-onnet the les one this is omplete. If you hve onfigured n optionl login pssword, you must enter it when prompted to ess the We Bsed Mngement. For more informtion, see We Bsed Mngement in the Network User's Guide. 23

24 Other Informtion Brother CretiveCenter Get inspired. If you're using Windows, doule-lik the Brother CretiveCenter ion on your desktop to ess our FREE we site with mny ides nd resoures for personl nd professionl use. M users n ess Brother CretiveCenter t this we ddress: 24

25 Options nd Consumles Option The mhine hs the following optionl essory. You n expnd the pilities of the mhine y dding the item. For more informtion out the optionl omptile SO-DIMM Memory, visit us t For instlling the SO-DIMM Memory, see Instlling extr memory in the Advned User's Guide. SO-DIMM Memory You n inrese the memory y instlling one SO-DIMM (Smll Outline Dul In-line Memory Module). Consumles When the time omes to reple onsumle items, n error will e indited y the LCD on the ontrol pnel. For more informtion out the onsumles for your mhine, visit us t or ontt your lol Brother reseller. Toner rtridge Stndrd Toner: TN-720 High Yield Toner: TN-750 Drum unit DR

26 Trdemrks The Brother logo is registered trdemrk of Brother Industries, Ltd. Brother is registered trdemrk of Brother Industries, Ltd. Mirosoft, Windows, Windows Server nd Internet Explorer re either registered trdemrks or trdemrks of Mirosoft Corportion in the United Sttes nd/or other ountries. Windows Vist is either registered trdemrk or trdemrk of Mirosoft Corportion in the United Sttes nd/or other ountries. Apple, Mintosh, Sfri nd M OS re trdemrks of Apple In., registered in the U.S. nd other ountries. Linux is the registered trdemrk of Linus Torvlds in the U.S. nd other ountries. Nune, the Nune logo, PperPort nd SnSoft re trdemrks or registered trdemrks of Nune Communitions, In. or its ffilites in the United Sttes nd/or other ountries. Eh ompny whose softwre title is mentioned in this mnul hs Softwre Liense Agreement speifi to its proprietry progrms. Any trde nmes nd produt nmes of ompnies ppering on Brother produts, relted douments nd ny other mterils re ll trdemrks or registered trdemrks of those respetive ompnies. Compiltion nd Pulition Under the supervision of Brother Industries, Ltd., this mnul hs een ompiled nd pulished, overing the ltest produt desriptions nd speifitions. The ontents of this mnul nd the speifitions of this produt re sujet to hnge without notie. Brother reserves the right to mke hnges without notie in the speifitions nd mterils ontined herein nd shll not e responsile for ny dmges (inluding onsequentil) used y reline on the mterils presented, inluding ut not limited to typogrphil nd other errors relting to the pulition. Copyright nd Liense 2012 Brother Industries, Ltd. All rights reserved. This produt inludes softwre developed y the following vendors: PACIFIC SOFTWORKS, INC. ALL RIGHTS RESERVED Deviespe Softwre, In. All rights reserved. This produt inludes the KASAGO TCP/IP softwre developed y ZUKEN ELMIC, In.