1 Avid AirSpeed Multi Stream AVC-Intra Upgrade Guide

Transcription

1 1 Avid AirSpeed Multi Stream AVC-Itra Upgrade Guide This guide provides iformatio o how to use the AirSpeed Multi Stream AVC-Itra Upgrade Kit ( ) upgrade ay AirSpeed Multi Stream system to make it a AVC-Itra system. Oce the upgrade has bee performed, you should refer to the AirSpeed Multi Stream Rack Mout ad Cablig Guide for iformatio o how to rack mout the system, ad cable it up. For more iformatio, see the followig topics: Upackig ad Ispectig the AVC-Itra Upgrade Kit o page 2 Performig the AVC-Itra Upgrade o page 4 Importat Iformatio Avid recommeds that you read all the iformatio i this guide thoroughly before istallig or usig ay ew software release. Importat: Search the Avid Kowledge Base for the most up-to-date ReadMe file, or other user documetatio, which cotais the latest iformatio that might have become available after the documetatio was published. c The ReadMe describes compatibility issues with previous releases, hardware ad software requiremets, software istallatio istructios, ad summary iformatio o system ad memory requiremets. The ReadMe also lists hardware ad software limitatios. ReadMe files are ot i the box. They ca be foud o the Dowload Ceter or the Kowledge Base as a PDF documet (ReadMe.pdf). You should always check olie for the most up-to-date release otes or ReadMe because the olie versio is updated wheever ew iformatio becomes available. To view these olie versios, visit the Kowledge Base at CAUTION: Electroic compoets. I the Retur to Avid kit, there is a ESD bag, retur tag, ad ESD wrist strap. Observe ESD hadlig precautios while performig the processes at a ati static workstatio. Wear grouded ESD wrist strap or heel straps.

2 1 Avid AirSpeed Multi Stream AVC-Itra Upgrade Guide Upackig ad Ispectig the AVC-Itra Upgrade Kit This topic provides iformatio o how to upack your AVC-Itra Upgrade kit ad ispect it to verify that the compoets are ot damaged i ay way. To complete the upgrade process, you also eed to reistall the AirSpeed Multi Stream applicatio software (ot icluded i the kit). You must have a copy of the software available to complete the upgrade. Oce the software is reistalled, you must the use the Hardware Diagostics applicatio (located i C:\Program Files > Avid > Avid AirSpeed Multi Stream> Utilities > Diagostics) to cofirm the hardware was istalled correctly. Upack ad Ispect Checklist The followig table provides a checklist of tasks that must be performed whe upackig ad ispectig your AirSpeed Multi Stream AVC-Itra Upgrade kit. Upack your AVC-Itra Upgrade kit, as described i Upackig the AVC-Itra Upgrade Kit o page 2. Verify that you have all of the correct boxes ad compoets, as described i Verifyig Compoets o page 3. Verify that the compoets are ot damaged, as described i Ispectig Compoets for Damage o page 4. Upackig the AVC-Itra Upgrade Kit Before you upack your AVC-Itra Upgrade kit, make sure the locatio is free of clutter ad dust. To upack your AVC-Itra Upgrade kit: 1. Ope the box. 2. Upack the compoets. Avid recommeds that you keep all packagig materials for at least 90 days. If you eed to retur a system to Avid Techology, Ic., the system must be repackaged i its origial packagig material to esure that there is o damage to the system durig shipmet. 3. Oce the items have bee upacked, visually ispect them to make sure that they do ot appear to be damaged i ay way. 2

3 Upackig ad Ispectig the AVC-Itra Upgrade Kit 4. The ext step is to verify that you have received all of the items particular to your order. For more iformatio, see Verifyig Compoets o page 3. Verifyig Compoets Oce you have upacked everythig, verify that you have the followig compoets: 1 Retur to Avid kit ( ), icludes a ESD bag, Retur tag, ad a ESD wrist strap 1 breakout cable ( ) 2 video I/O cards with AVC-I CODECs ( ) 1 video I/O riser board ( ) 1 PCI Express riser card ( ) 4 1/2, ylo slotted set screws ( ) x5/16 screws ( ) 6 lock washers ( ) 6 hex jam uts ( ) 4 BOMAR kurled (roud) uts ( ) (spares) black screws ( ) (spares) 1 AVC-Itra Kit Istalled label ( ) , MF stadoffs ( ) 1 AirSpeed Multi Stream AVC-Itra bezel ( ) 1 Avid AirSpeed Multi Stream badge ( ) 1 AirSpeed Multi Stream AVC-Itra backplate ( ) ReadMe files are ot i the box. They ca be foud o the Dowload Ceter or the Kowledge Base as a PDF documet (ReadMe.pdf). You should always check olie for the most up-to-date release otes or ReadMe because the olie versio is updated wheever ew iformatio becomes available. To view these olie versios, visit the Kowledge Base at If you are missig ay of these compoets, cotact Avid Techical Support before proceedig. The ext step is to ispect the compoets for damage. For more iformatio, see Ispectig Compoets for Damage o page 4. 3

4 1 Avid AirSpeed Multi Stream AVC-Itra Upgrade Guide Ispectig Compoets for Damage Oce you have verified that all of your compoets have bee shipped, you must also verify that they are ot damaged. To ispect compoets for damage: 1. Visually ispect all of the hardware compoets listed i the sectio o the previous page to make sure that oe of them were damaged durig shipmet. 2. If you receive a hardware compoet that is damaged, cotact Avid Techical Support. Performig the AVC-Itra Upgrade Oce you have ispected your ew upgrade compoets, you ca begi the AVC-Itra upgrade. It is also importat that you have the correct tools available before you begi the process. For more iformatio, see Tools Required o page 4. Whe performig the upgrade, you must use the AVC-Itra Upgrade checklist. It cotais a high level process of the tasks ivolved i performig the upgrade, as well as cross-refereces to each associated procedure. For more iformatio o the process, see AVC-Itra Upgrade Checklist o page 5. Tools Required The followig tools are required to perform the AirSpeed Multi Stream AVC-Itra upgrade. You must supply these tools yourself. #1 Phillips screwdriver (magetic tip preferred) 3/16 thi well ut driver 9/16 deep well ut driver Bomar hex shaft wrech (Part Number BD36400) The BOMAR hex shaft wrech is used to remove ad replace the Bomar kurled (roud) uts ( ) 4

5 Performig the AVC-Itra Upgrade AVC-Itra Upgrade Checklist The followig table provides a checklist of tasks that must be performed whe upgradig ay AirSpeed Multi Stream model to a AirSpeed Multi Stream AVC-Itra model. Uplug the cables from the AirSpeed Multi Stream chassis, as described i Upluggig the Cables o page 6. Remove the media drives from the AirSpeed Multi Stream chassis, as described i (Optioal) Removig the Media Drives o page 6. Remove the AirSpeed Multi Stream chassis from the rack, as described i Removig the AirSpeed Multi Stream Chassis from the Rack o page 7. Remove the top of the case ad the old versio of the I/O back plate from the AirSpeed Multi Stream chassis, as described i Removig the Top of the Case ad the I/O Backplate o page 8. Remove the existig VIO card(s) from the AirSpeed Multi Stream chassis, as described i Removig the Top of the Case ad the I/O Backplate o page 8. Istall the riser cards ad VIO cards ito the chassis, as described i Istallig the Riser Cards ad VIO Cards o page 12. Replace the AVC-Itra I/O backplate, replace the top of the case, ad affix the ew AirSpeed Multi Stream bezel ad badge, as described i Replacig the I/O Backplate ad the Top of the Case o page 15. Re-rack the AirSpeed Multi Stream chassis i your rack, as described i AirSpeed Multi Stream Rack Mout ad Cablig Guide Isert the media drives i the proper order i the upgraded chassis, as described i (Optioal) Re-Isertig the Media Drives ito the Chassis o page 18. Recoect the cables to the AirSpeed Multi Stream chassis, as described i the Avid AirSpeed Multi Stream Istallatio ad User s Guide. Reistall or upgrade the AirSpeed Multi Stream applicatio software, see the topic Reistallig the AirSpeed Multi Stream Applicatio o page 19 that refers you to the exact topics as described i the Avid AirSpeed Multi Stream Istallatio ad User s Guide. Retur the origial VIO board(s) to Avid, as described i Returig the Origial VIO Board(s) to Avid o page 19. 5

6 1 Avid AirSpeed Multi Stream AVC-Itra Upgrade Guide Upluggig the Cables Oce you have ispected the ew parts for damage, you must ext uplug the cables from the rear of the chassis. All cables, icludig the followig must be uplugged from the rear of the chassis: SDI ad Video Referece cables LTC I cables USB cables Etheret cables Expasio port cables Remote serial cables Cosole cables VGA cables Power cords Oce the cables are removed, we recommed that you remove the media drives from the chassis. For more iformatio, see (Optioal) Removig the Media Drives o page 6. (Optioal) Removig the Media Drives Oce you have uplugged the cables from the rear of the AirSpeed Multi Stream chassis, you must ext determie whether you wat to remove the four media drives from the frot of the chassis. This procedure is optioal depedig o whether you feel that you ca lift the uit from the chassis. The media drives add to the weight of the chassis, ad removig it from the rack might result i the chassis droppig ito the rack. If you decide to leave the media drives i the chassis, proceed to the topic Removig the AirSpeed Multi Stream Chassis from the Rack o page 7. To remove the media drives from the chassis: 1. Prior to removig the drives, idetify each media drive by affixig a small label o each media drive s hadle ad umberig them, from left to right, 1, 2, 3 ad 4. These drives will eed to be replaced i that exact drive slot order as they were removed from. 2. Pull the plastic hadle (with drive size label) ope, to ulock the drive from the slot. 3. Usig the hadle, pull the drive from the slot. 6

7 PGD LRM TMP NET LTC REF ACT WNK Performig the AVC-Itra Upgrade 4. Repeat steps 2 through 3 util all media drives are removed from the chassis. Oce the drives are removed, you ca remove the AirSpeed Multi Stream from the rack. For more iformatio, see Removig the AirSpeed Multi Stream Chassis from the Rack o page 7. Removig the AirSpeed Multi Stream Chassis from the Rack All Avid AirSpeed Multi Stream rack-mout compoets are supplied with rear mout rack supports (brackets). These ca be left i the rack. You should have someoe helpig you lift the AirSpeed Multi Stream whe removig it from the rack. To remove the AirSpeed Multi Stream chassis from the rack: 1. Remove the rack ear covers o the rack ear clips. If the frot bezel is istalled o the frot of your chassis, you ca leave it o. 7

8 PGD NET 1 Avid AirSpeed Multi Stream AVC-Itra Upgrade Guide 2. Uscrew the chassis from the frot of the rack through the ears of the chassis as show i the followig figure. LRM TMP LTC REF ACT WNK 3. Lift the chassis ad slide it off of the rear brackets. 4. Place the chassis i the locatio where you are goig to perform the AVC-Itra upgrade. Removig the Top of the Case ad the I/O Backplate Oce you have ispected the ew parts, uplugged all cables, removed the drives, ad removed the chassis from the rack, you are ready to remove the top of the case ad the I/O backplate from the rear of the chassis. The illustratios i this sectio depict a SD model AirSpeed Multi Stream. To remove the top of the case ad the I/O backplate: 1. Usig a #1 Phillips screwdriver, remove the eight (8) screws from the top of the case ad getly slide the top of the case to the rear of the chassis. Place it aside. Do ot lose these screws. You will eed them later. Keep them i a cup or dish so that they do ot get lost! 8

9 Performig the AVC-Itra Upgrade 2. Usig a 3/16 thi well ut driver, remove the four (4) D-sub screws from the back of the chassis as show i the followig illustratio. Remove the four (4) D-sub screws PORT 1 PORT 2 1 IN OUT 3 4 CONSOLE REF LTC VGA SERIAL ETHERNET USB 3. Do the followig as show i the followig illustratio. a. If your uit has hex uts, use a 9/16 deep well ut driver to loose ad remove the hex uts ( ), ad their lock washers ( ) from the SDI iput ad output BNC coectors. b. Use the special Bomar hex shaft wrech to remove the kurled uts ( ), ad their lock washers ( ) from each REF ad LTC BNC coector. Some uits shipped with oly Bomar kurled uts. If your uit does ot have hex uts, use the Bomar hex shaft to remove the kurled uts ad their lock washers from all BNC coectors. Remove the hex uts, kurled uts, ad lock washers over each BNC coector (10 total) PORT 1 PORT 2 1 IN OUT 3 4 CONSOLE REF LTC VGA SERIAL ETHERNET USB 9

10 1 Avid AirSpeed Multi Stream AVC-Itra Upgrade Guide 4. Remove the three (3) screws o the bottom of the chassis backplate ad the oe (1) screw o the right side of the chassis as depicted i the followig illustratio. Do ot lose these screws. Keep them i a cup or dish so they do ot get lost! PORT 1 PORT 2 1 IN OUT 3 4 CONSOLE REF LTC VGA SERIAL ETHERNET USB Remove the four (4) chassis backplate screws 5. Remove the I/O backplate by carefully guidig the backplate off of the BNC coectors. 6. The ext step is to remove the existig VIO card from the chassis. For more iformatio, see Removig the Existig VIO Card(s) from the Chassis o page 10. Removig the Existig VIO Card(s) from the Chassis This procedure cotais iformatio o how to remove the existig VIO card(s) from the chassis. You must retur the origial VIO card(s) to Avid. To remove the existig VIO card(s) from the chassis: 1. Usig a #1 Phillips screw driver, remove the four (4) screws that attach the VIO card to the chassis as show i the followig illustratio. 10

11 Performig the AVC-Itra Upgrade The model you are upgradig from might have either oe or two VIOs i it. The followig diagram shows a model with oe VIO card. Remove the four (4) VIO screws 2. Very getly, rock ad lift the card straight up i order to release it from the chassis. 3. Place the VIO card i the ESD bag icluded i the Retur to Avid kit. 4. (Optioal) If there are two VIO cards i your origial system, repeat Steps 1-3 to remove the secod VIO card. 5. The ext step is to istall the riser cards ad the ew VIO cards. For more iformatio, see Istallig the Riser Cards ad VIO Cards o page

12 1 Avid AirSpeed Multi Stream AVC-Itra Upgrade Guide Istallig the Riser Cards ad VIO Cards This procedure cotais iformatio o how to istall the additioal riser cards ad two ew VIO cards ito the chassis. To istall the riser cards ad the VIO card: 1. Istall the riser cards ( ) ad ( ) as show i the followig illustratio. Verify that the origial riser cards are fully seated i their respective coectors. Make sure the gold figer coectors are iserted all the way ito the coector. Do ot touch the gold figer coectors. Use the ati-static bag or similar ati-static material whe pushig the Riser cards ito the coectors. 12

13 Performig the AVC-Itra Upgrade 2. (Optioal) If ot previously istalled, istall the four (4) hex stadoffs ( ) to the base of the chassis as show. Istall the four (4) hex stadoff screws to the chassis as show by the white stars 13

14 1 Avid AirSpeed Multi Stream AVC-Itra Upgrade Guide 3. To help you to better alig the VIO cards before screwig them i, we have provided four ylo set screws ( ) that you will use to temporarily alig the VIO cards with AVC-Itra Codec modules ( ). To use these, do the followig: a. Screw a ylo set screw ( ) three or four turs ito each of the four stadoffs, as show i the followig illustratio: Istall the four (4) 1/2 ylo set screws to this VIO Istall the four (4) 1/2 ylo set screws to this VIO b. Positio the VIO card over the stadoffs, ad alig the two frot VIO screw holes over the ylo set screws. c. Alig the two middle VIO screw holes over the ylo set screws. Verify that the coectors P5 ad P6 o the uderside of the VIO cards are aliged with their correspodig riser cards. Make sure wires are ot trapped betwee the VIO cards ad the stadoffs. d. Push the VIO dow util the coector fully mates. e. Remove the four ylo set screws. 14

15 Performig the AVC-Itra Upgrade f. Repeat this step as ecessary for the secod VIO. 4. Faste each VIO card to four (4) stadoffs with four (4) 6-32 x 5/16 screws ( ). Refer to the followig illustratio. Istall the four (4) 6-32 x 5/16 screws to this VIO Istall the four (4) 6-32 x 5/16 screws to this VIO 5. The ext step is to attach the AVC-Itra I/O backplate to the chassis, ad replace the top of the case. For more iformatio, see Replacig the I/O Backplate ad the Top of the Case o page 15. Replacig the I/O Backplate ad the Top of the Case Oce you have fiished istallig the VIO cards ito the chassis, you are ready to replace the old versio of the I/O backplate with the AVC-Itra (dual VIO) I/O backplate ( ). Oce that is doe, you ca replace the top of the case, ad the replace the AirSpeed Multi Stream AVC-Itra bezel ad badge. 15

16 1 Avid AirSpeed Multi Stream AVC-Itra Upgrade Guide To replace the I/O backplate ad replace the top of the case: 1. Attach the AVC-Itra I/O backplate ( ) to the rear of the chassis by carefully guidig the backplate over the BNC coectors. 2. Attach the three (3) screws o the bottom of the chassis backplate ad the oe (1) screw o the right side of the chassis as depicted i the followig illustratio: PORT 1 PORT 2 1 IN 2 1 OUT 2 3 IN 4 3 OUT 4 CONSOLE REF LTC VGA SERIAL ETHERNET USB Attach the four (4) chassis backplate screws 3. Do the followig as show i the followig illustratio. a. Use a special Bomar hex shaft wrech (BD36400) to faste ad tighte the kurled uts ( ), ad their lock washers ( ) over each REF ad LTC BNC coector. b. If your uit has hex uts, use a 9/16 deep well ut driver to faste ad tighte the hex uts ( ), ad their lock washers ( ) to the SDI iput ad output BNC coectors. Some uits shipped with oly Bomar kurled uts. If your uit does ot have hex uts, use the Bomar hex shaft to reistall the kurled uts ad their lock washers from all BNC coectors. Attach 12 lock washers ad 12 hex uts to this bak of BNC coectors PORT 1 PORT 2 OUT OUT 3 4 IN 1 2 IN CONSOLE REF LTC VGA SERIAL ETHERNET USB Attach 4 lock washers ad 4 kurled uts to this bak of BNC coectors 16

17 Performig the AVC-Itra Upgrade 4. Faste the four (4) D-sub screws to the back of the chassis as show i the followig illustratio. Attach the four (4) D-sub screws PORT 1 PORT 2 1 IN 2 1 OUT 2 3 IN 4 3 OUT 4 CONSOLE REF LTC VGA SERIAL ETHERNET USB 5. Getly lift the top of the case ad slide it oto the chassis. 6. Faste the eight (8) case screws to the top of the case. 7. Replace the old AirSpeed Multi Stream bezel with the AirSpeed Multi Stream AVC-Itra bezel ( ) by doig the followig: a. Remove the old AirSpeed Multi Stream bezel from the frot of the chassis. b. Affix the ew AirSpeed Multi Stream AVC-Itra bezel oto the frot of the chassis. c. Affix the ew Avid AirSpeed Multi Stream badge ( ) oto the frot of the bezel. 8. Place the AVC-Itra Upgrade Kit Istalled label ( ) directly below the AirSpeed Multi Stream agecy label as show i the followig picture. 17

18 1 Avid AirSpeed Multi Stream AVC-Itra Upgrade Guide 9. Rack mout your chassis. For more iformatio, see the AirSpeed Multi Stream Rack Mout ad Cablig Guide, or the AirSpeed Multi Stream Istallatio ad User s Guide. 10. Oce the chassis has bee restored to the rack, the ext step is to isert the media drives i the proper order. For more iformatio, see (Optioal) Re-Isertig the Media Drives ito the Chassis o page 18. (Optioal) Re-Isertig the Media Drives ito the Chassis Oce you have completed the AVC-Itra upgrade, ad replaced the chassis i the rack, if you have removed the media drives from the chassis, you ca ow re-isert the four (4) pre-labeled media drives ito the chassis i the same slots as they were previously located. To re-isert the Media drives ito the chassis: 1. Isert the media drives ito the chassis usig the same slots from which they were removed. Make sure that the left-most slot receives the drive previously labeled as 1, the secod slot from the left receives the drive labeled 2, the third slot from the left receives the drive labeled 3 ad the far right slot receives the drive labeled Pull ope the plastic hadle (with drive size label) o the frot of the drive. 3. Place the drive ito the slot ad slowly push the drive completely ito the slot. 4. Push the plastic hadle (with drive size label) closed, to lock the drive ito the slot. 5. Repeat Steps 1-4 for the other media drives. 6. Recoect all of the cables. For more iformatio o coectig the cables, see the AirSpeed Multi Stream Rack Mout ad Cablig Guide, or the AirSpeed Multi Stream Istallatio ad User s Guide. 18

19 Performig the AVC-Itra Upgrade Reistallig the AirSpeed Multi Stream Applicatio Oce you have completed the AVC-Itra upgrade, replaced the chassis i the rack, ad re-iserted your four (4) pre-labeled media drives ito the chassis, you must reistall the AirSpeed Multi Stream applicatio software, ad the use the Hardware Diagostics to cofirm the ew hardware is detected. For more iformatio o: Reistallig the AirSpeed Multi Stream applicatio software, see the topic Istallig AirSpeed Multi Stream Applicatio Software i the AirSpeed Multi Stream Istallatio ad User s Guide. Usig the Hardware Diagostics to cofirm the ew hardware is detected, see Appedix B - Performig Hardware Diagostics i the AirSpeed Multi Stream Istallatio ad User s Guide. Your ext step is to retur the origial VIO board back to Avid. For more iformatio, see Returig the Origial VIO Board(s) to Avid o page 19 Returig the Origial VIO Board(s) to Avid Oce you have completed the AVC-Itra upgrade, replaced the chassis i the rack, ad re-iserted your four (4) pre-labeled media drives ito the chassis, you should retur the origial VIO board(s) to Avid. To retur the origial VIO board(s) to Avid: 1. Place the origial VIO board(s) i a ati-static bag. You ca use oe of the ati-static bags that the ew VIO boards came i. 2. Place the bag i the same box that the AVC-Itra Upgrade kit came i, or the oe provided i the Retur to Avid kit. 3. Sed the box cotaiig the origial VIO board(s) to Avid. Follow the istructios i the Returig Parts documet icluded with the AVC-Itra Upgrade kit for iformatio o where to sed the origial VIO board(s). 19

20 1 Avid AirSpeed Multi Stream AVC-Itra Upgrade Guide Legal Notices Product specificatios are subject to chage without otice ad do ot represet a commitmet o the part of Avid Techology, Ic. The software described i this documet is furished uder a licese agreemet. You ca obtai a copy of that licese by visitig Avid's Web site at The terms of that licese are also available i the product i the same directory as the software. The software may ot be reverse assembled ad may be used or copied oly i accordace with the terms of the licese agreemet. It is agaist the law to copy the software o ay medium except as specifically allowed i the licese agreemet. AirSpeed Multistream ad AirSpeed Classic or portios thereof are protected by oe or more of the followig Uited States patets: 6,763,523; 6,766,357; 7,403,561; 7,433,519. Other patets are pedig. AirSpeed Multistream ad AirSpeed Classic or portios thereof are protected by the followig Europea patet: Other patets are pedig. No part of this documet may be reproduced or trasmitted i ay form or by ay meas, electroic or mechaical, icludig photocopyig ad recordig, for ay purpose without the express writte permissio of Avid Techology, Ic. Copyright 2010 Avid Techology, Ic. ad its licesors. All rights reserved. Portios of this product were created usig LEADTOOLS , LEAD Techologies, Ic. ALL RIGHTS RESERVED. Portios of this product are licesed uder US patet 5,327,254 ad foreig couterparts. Portios Copyright of MOG Solutios. Att. Govermet User(s). Restricted Rights Leged U.S. GOVERNMENT RESTRICTED RIGHTS. This Software ad its documetatio are commercial computer software or commercial computer software documetatio. I the evet that such Software or documetatio is acquired by or o behalf of a uit or agecy of the U.S. Govermet, all rights with respect to this Software ad documetatio are subject to the terms of the Licese Agreemet, pursuat to FAR (a) ad/or DFARS (a), as applicable. Trademarks 003, 192 Digital I/O, 192XD I/O, 888 I/O, Adrealie, AirPlay, AirSPACE, AirSPACE HD, AirSpeed, ALEX, Aliebrai, AiMatte, AudioMarket, AudioPages, AudioSuite, AudioVisio, AutoSyc, Avid, Avid Advaced Respose, Avid DNA, Avid DNxcel, 20

21 Performig the AVC-Itra Upgrade Avid DNxHD, AVIDdrive, Avid DS Assist Statio, Avid EditStar, Avid Learig Excellerator, Avid Liquid, Avid Liquid Chrome Xe, Avid MEDIArray, Avid Mojo, AvidNet, AvidNetwork, Avid NewStar, Avid Remote Respose, AVIDstripe, Avid Uity, Avid Uity ISIS, Avid VideoRAID, Avid Xpress, AVoptio, AVX, Beauty Without The Badwidth, Blacktooth, Boom, C 24, CamCutter, CaptureMaager, ChromaCurve, ChromaWheel, Commad 24, Coectiv, CoutDow, DAE, Dazzle, Dazzle Digital Video Creator, Deko, DekoCast, D-Fi, D-fx, DigiDelivery, Digidesig, Digidesig Audio Egie, Digidesig Itelliget Noise Reductio, DigiDrive, DigiLik, DigiMeter, DigiSerial, Digital Noliear Accelerator, DigiTraslator, DINR, DNxchage, do more, DVD Complete, D-Verb, Eleve, Equiox, EveryPhase, ExpertReder, Fastbreak, Fast Track, FieldPak, Film Composer, FilmScribe, Flexevet, FluidMotio, FXDeko, G7, G-Rack, HD Core, HD Process, HDPack, Hollywood DV-Bridge, Hybrid, HyperCotrol, HyperSPACE, HyperSPACE HDCAM, IllusioFX, Image Idepedece, inews, inews Assig, inews CotrolAir, Istatwrite, Istict, Itelli-sat Broadcastig Recordig Maager, Itelli-Sat, IterFX, Iterplay, itone, Itraframe, is9, is18, is23, is36, ISIS, IsoSyc, KeyRig, KeyStudio, LauchPad, LeaderPlus, Lightig, ListSyc, Lo-Fi, Magic Mask, Make Aythig Hollywood, make maage move media, Marquee, M-Audio, M-Audio Micro, Maxim, Mbox, MCXpress, Media Browse, Media Composer, MediaDock, MediaDock Shuttle, Media Fusio, Media Illusio, MediaLog, Media Reader, Media Recorder, MEDIArray, MediaShare, MediaStream, Media Suite, Meridie, MetaFuze, MetaSyc, MicroTrack, Midima, MissioCotrol, Mix Rack, MixLab, Moviebox, Moviestar, NaturalMatch, Nearchive, NetReview, NewsCutter, Nitris, NRV-10 iterfx, Octae, OMF, OMF Iterchage, OMM, ODVD, Ope Media Framework, Ope Media Maagemet, Palladium, Piacle, Piacle DistaTV, Piacle Geiebox, Piacle HomeMusic, Piacle MediaSuite, Piacle Mobile Media, Piacle PCTV, Piacle PCTV HD Ultimate Stick, Piacle PCTV Nao Stick, Piacle PCTV To Go, Piacle Scorefitter, Piacle Studio, Piacle Studio MovieBoard, Piacle Systems, Piacle VideoSpi, ProEcode, ProServices, ProSessios, Pro Tools, QuietDrive, Recti-Fi, Reel Tape Delay, Reel Tape Flager, Reel Tape Saturatio, RetroLoop, rs9, rs18, Salesview, Sci-Fi, Scorch, Scorefitter, ScriptSyc, SecureProductioEviromet, Sessio, Show Ceter, Sibelius, SIDON, Soft SampleCell, Soft-Clip Limiter, Soud Desiger II, SPACE, SPACEShift, SpectraGraph, SpectraMatte, Starplay, SteadyGlide, Streamfactory, Streamgeie, StreamRAID, Strike, Structure, Studiophile, SubCap, Sudace Digital, Sudace, Symphoy, SYNC HD, SychroSciece, SychroScope, Sytax, Targa, TDM FlexCable, Thuder, Tita, Titasyc, TL Aggro, TL AutoPa, TL Drum Rehab, TL Everyphase, TL Fauxlder, TL I Tue, TL MasterMeter, TL Metro, TL Space, TL Utilities, Torq, Torq Xpoet, Trasfuser, Trigger Figer, Trillium Lae Labs, TruTouch, UityRAID, Vari-Fi, Velvet, Veom, VideoRAID, Video Slave Driver, VideoSPACE, VideoSpi, Vortex, Xdeck, X-Form, Xmo, Xpoet, X-Sessio, ad X-Sessio Pro are either registered trademarks or trademarks of Avid Techology, Ic. i the Uited States ad/or other coutries. 21

22 1 Avid AirSpeed Multi Stream AVC-Itra Upgrade Guide Adobe ad Photoshop are either registered trademarks or trademarks of Adobe Systems Icorporated i the Uited States ad/or other coutries. Apple ad Macitosh are trademarks of Apple Computer, Ic., registered i the U.S. ad other coutries. Widows is either a registered trademark or trademark of Microsoft Corporatio i the Uited States ad/or other coutries. All other trademarks cotaied herei are the property of their respective owers. Avid AirSpeed Multi Stream AVC-Itra Upgrade Guide Rev A July /13/10 22