From Product Management Telephone Nuremberg

Transcription

1 Frm Prduct Management Telephne Nuremberg Release Letter Prduct: Vide Recrding Manager Versin: This dcument cntains latest infrmatin abut the abve mentined feature release 3.60 Build 0043 f Bsch Vide Recrding Manager (VRM). Prduct bundaries are als described in the datasheet which can be fund n the Bsch web page. Imprtant Nte: The mst recent versin f Vide Recrding Manager can be dwnladed frm: (Vide Vide Sftware Vide Management Systems). 1. General VRM Vide Recrding Manager prvides a Distributed Netwrk Vide Recrder slutin, eliminating the need fr dedicated NVRs and signalling the secnd generatin f IP Netwrk Vide Recrding. VRM supprts iscsi-based strage systems and the Bsch Vide IP devices (IP cameras and IP vide servers). VRM Vide Recrding Manager is cmprised f the fllwing sftware packages VRM Server including VRM Mnitr Cnfiguratin Manager Vide Streaming Gateway Please nte: Fr VRM Vide Recrding Manager v2.12 and later the Bsch Vide Client BVC is the standard replay client. The BVC sftware and dcumentatin is available n the Bsch ST web site Fr playback f vide data exprted by VRM exprt Wizard the sftware Archive Player (part f the installatin package) must be used. VRM ffers system-wide recrding mnitring and management f Bsch iscsi strage, vide servers and cameras. VRM sftware supprts Bsch H.264 and MPEG-4 IP vide devices including all encders, Dinin and FlexiDme IP cameras, as well as AutDme and Extreme IP cameras and the Bsch HD cameras. Supprted strage subsystems are the Bsch DSA and DLA disk array systems (iscsi-based DVA strage systems still will wrk). The iscsi disk arrays are nt attached directly t VRM, but instead can be attached anywhere n a standard IP netwrk via a 1 GbE uplink. With the new Vide Streaming Gateway cmpnent 3 rd party cameras supprting ONVIF, RTSP r JPEG prtcl are supprted including the Bsch Legacy devices such VJ 8008 (RCP+ prtcl). 2. New Features Supprt fr iscsi LUNs with up t 8TB in size Tested with high availability slutin frm Micrsft (Hyper-V) and VMware (ESXi) Increased maximum supprted blckcunt frm 1 millin t 2 millins Authenticity check n recrdings Internal prt-frwarding extended t 128 channels 1 BOSCH and the symbl are registered trademarks f Rbert Bsch GmbH, Germany

2 Frm Prduct Management Telephne Nuremberg 3. Changes / Bug Fixes Supprt fr larger camera blck lists (512 instead f 128) s that als cameras with high bitrate can recrd lng enugh if VRM is dwn Fixed: Failver server was nt wrking as expected if it was restarted while the master server was dwn Fixed: VRM culd crash if cameras send unexpected respnse paylads Fixed: failver VRM licensing issue Fixed: issue with UTC+X:30 time znes Fixed: span allcatin issue described in KB article Restrictins; Knwn Issues Installatin, Upgrade, Dwngrade Strage Recrding When upgrading an existing VRM server installatin a message might be shwn that the rms service culd nt be stpped. Enter retry in the message bx and the installatin rutine will prperly be cntinued. Dwngrade frm VRM 3.20 r higher t 3.0 r earlier is nt supprted. Uninstallatin f VRM 3.20 r higher and deletin f cnfig.xml is required t dwngrade. During the installatin prcess f VRM 3.20 r higher a backup f the riginal cnfig.xml will be stred in the VRM directry. This can be reused when dwngrading t VRM 3.0 by renaming it t cnfig.xml when VRM 3.0 is stpped. LUN Size : Size f a single LUN may nt exceed 8000 GB therwise prblems when frmatting the LUN with Cnfiguratin Manager will ccur. Nte: VRM uses a virtualizatin layer and manages 1GB blcks ut f all LUNs. Thus, fr the functinality it makes n difference hw many LUNs are cnfigured within ne strage subsystem. Restrictins fr LUNs larger than 2000 GB: Tape backup via VRM Exprt Wizard is nt pssible. Requires camera firmware versin 6.30 r later Direct iscsi playback is nt supprted Ttal number f recrding blcks shall nt exceed per VRM system. Deleting LUNs n Bsch DSA FAS strage systems may take several hurs. If new LUNs are created while deleting is in prcess, the newly created LUNs have nt yet full capacity. Therefre, it is necessary t wait befre ging live until the LUNs are cmpletely deleted. The status f LUN deletin cannt be requested actively; nly the final status f the deletin prcess is accessible. This restrictin des apply t the new DSA E-Series. Restrictin: USB Transcder IQN must be added manually t DSA FAS system if FAS des nt supprt wildcard IQN Changing IP-Addresses fr iscsi-strage is nt supprted Re-rganizatin jb f Autmatic Mde is nly perfrmed, if master VRM is nline. 2 BOSCH and the symbl are registered trademarks f Rbert Bsch GmbH, Germany

3 Frm Prduct Management Telephne Nuremberg Time Server: VRM expects a lcal Windws Time Server running r fr the BVIP cameras/encders an external time server is cnfigured. VRM Server may nt be used as lcal time server. "Priritizatin Live Viewing vs. Recrding": Recrding and live viewing are independent prcesses and d nt have a priritizatin. The number f replay sessins started may influence the recrding, i.e. system resurces f strage array may be getting lw and unrecgnized by the VRM. Nte: Recrding must be manually cnfigured in a way t allw fr the required recrding sessins and/r replay sessins. Autmatic/Failver : On failure f the primary strage and switching t the failver strage a recrding gap f multiple secnds will ccur. Alarm recrding: smetimes an active pre-alarm recrding will be shwn twice in the recrding list. Firmware 5.0 and higher: Prealarm may be set t a minimum value f 1s and pst alarm t 5s. Firmware versins prir t 5.0 pre- and pstalarm recrding: the minimum time that can be cnfigured fr prealarm recrding is 15 secnds and 5 secnds fr pstalarm recrding. Failver: switching the primary and secndary iscsi target may result in a span list with incrrect quta Failver (Backup) server must nt execute frmat jbs Recrding Migratin: Recrdings that were created in a direct iscsi envirnment with FW 3.52 cannt be migrated directly t a VRM slutin but recrdings will be ignred. Lcal recrdings f BVIP devices with Firmware 4.10 r higher may be migrated t VRM envirnments. Changing devices frm M2 t M4 mde: Due t the additinal channels in M4 mde the recrdings frm encder input 3 that were accessible under channel 2 in M2 mde are nw accessible under channel 3. Old recrdings f channel 3 created in M2 mde are still accessible under channel 2. Changing devices frm M4 t M2 mde: Recrdings frm channel 3 and 4 in M4 mde will nt be accessible anymre in M2 mde. Please backup any relevant data befre switching frm M4 t M2. Once the device has been set t M2 mde data f channel 3 and 4 will be deleted. FTP Exprt f Recrding: If FTP exprt fr lcal recrding f a BVIP device has been cnfigured this must be deactivated manually befre the camera/encder is mved t a VRM envirnment Authenticity check is nt available if ANR is enabled. During alarm recrding, authenticity check is nly available within the recrdings. Vide Streaming Gateway Audi n sme 3 rd Party cameras nt fully supprted which may result in nn-availability f audi streams Mtin JPEG uses framerate as cnfigured in camera settings VCA is always recrded fr Bsch devices VCA is nt available fr ONVIF cameras 3 BOSCH and the symbl are registered trademarks f Rbert Bsch GmbH, Germany

4 Frm Prduct Management Telephne Nuremberg Cnfiguratin Maximum i-frame distance must nt be exceed 60; fr backward replay nly 30 r less are supprted During establishing a live cnnectin n i-frame is requested, i.e. live cnnectin is established nt befre the first i-frame is received RTSP timeut handling like in Onvif handling (SET_PARAMETER) - sme lder cameras may nt supprt this. GUI : Device tabs blck n sme PCs when camera privileges are mdified and a device f different type is selected withut saving the changes. Nte: Wrkarund privilege changes shuld be saved befre selecting a device f anther type. Mass peratins might nt wrk reliably when mre than 200 devices are selected. Truble Shting IntuiKey T avid high CPU lads while zipping system lg files in case f truble shting the zipping prcess is running with lwest pririty and may take a while If extended lgging is activated and disk space is running belw 1 GB free space, VRM autmatically deactivates extended lgging. RCP+ lgging must nt be activated fr mre than 2000 devices. In this case extended lgging must be turned ff. Replay : IntuiKey can't start replay f media files stred n lcal PC UI Display : IntuiKey user interface displays ISO-Latin1 characters nly Netwrk Cnfiguratin After licensing VRM n changes n the netwrk links frm different adapters shuld be dne else VRM might encunter prblems with license and/r blck management Netwrk interfaces withut a cable plugged in d nt shw an IP address n Windws Server 2008 based systems and therefre will be ignred by VRM. If a cable is plugged in at a later time, this may cause rerdering f the detected netwrk interface prts and can cause prblems with licensing (s. abve) 5. Installatin Ntes When installing the Cnfiguratin Manager the Micrsft.NET 2.0 package is installed by the Bsch VRM Installatin Tl. Fr the installatin f the.net 2.0 packages the MS Windws Installer versin 3.0 r higher is required. A MS Windws Installer 3.1 versin is available in the VRM Dwnlad package (tls MS Installer) and may be installed separately if necessary. Imprtant nte: Fr full feature cmpatibility VRM 3.20 r higher requires the BVIP firmware versin 6.0 r later. DSA E-Series Dual Cntrller and high-density expansin shelf prducts are nt supprted in earlier firmware versins but VRM 3.20 r higher itself is backward cmpatible with firmware versins 2.53 r higher. Of curse, enhancements and features available nly with firmware versin 6.0 will nt be active. Imprtant nte: VIDOS Client is nt supprted by VRM 3.0 r higher 4 BOSCH and the symbl are registered trademarks f Rbert Bsch GmbH, Germany

5 Frm Prduct Management Telephne Nuremberg 6. Cnfiguratin Ntes Retentin Time : The maximum Retentin Time is lwer priritized than actual recrding. This means, if the preset maximum retentin time is lnger than the available strage capacity allws fr the lder recrdings are verwritten. The minimum Retentin Time has a higher pririty than recrding. If the preset minimum retentin time is lnger than the available strage capacity allws fr recrding will be stpped and data is nt deleted. Nte: Capacity necessary must be calculated manually depending n the desired retentin time values 7. System Requirements VRM Server The service VRM Server must be installed n a Micrsft Windws based platfrm. N ther Web server applicatin may be installed: Hardwar e Operatin g System CPU RAM Graphic Card Ethernet Card Sftwar e Free Disk Space Installati n Virtual Machine Server Windws Server 2008 R2 (Standard Editin, 64-bit), Windws Strage Server 2008 R2 (Standard Editin, 64-bit), Windws 7 Ultimate, Prfessinal (SP1, 32-bit, 64-bit), Windws Server 2012R2, Windws Strage Server 2012R2; VMWare (ESXi 5.5); Hyper-V with Windws Server 2012 R2 1x r 2x Quad-Cre Intel Xen Prcessr E5606 (2.13 GHz, 8 MB L3 cache) r faster min. 4 GB VGA- r SVGA-cmpatible 1 Gbps DirectX 9.0c 1000 MB Windws Administratr Rights If a virtualized high availability slutin is used t run the VRM server sftware, it shall be cnfigured in the same way as described in the crrespnding BschVMS Technical Service nte. 5 BOSCH and the symbl are registered trademarks f Rbert Bsch GmbH, Germany

6 Frm Prduct Management Telephne Nuremberg VMware: nus_ pdf Hyper V: pdf VRM Mnitr VRM Vide Recrding Manager prvides a HTML interface t be used with a Web GUI within the VRM Vide Recrding Manager netwrk. This VRM Mnitr mdule is installed autmatically tgether with VRM Server. System requirements fr VRM Mnitr are: Brwser Ethernet Card Ggle Chrme 30 r higher; Mzilla Firefx 25 r higher; Internet Explrer 10 r higher; Safari 7 r higher; 1 Gbps (recmmended) Cnfiguratin Manager System requirements fr Cnfiguratin Manager are: Hardware Persnal Cmputer Operating System Windws Server 2008R2; Windws 7 SP1; Windws 8 CPU Dual Cre, 3.0 GHz r better RAM Min. 2 GB Graphic Card refer t MPEG-ActiveX 5.83 Ethernet Card 1 Gbps (recmmended) Sftware DirectX 9.0c; Micrsft.NET 4.5 Installatin Windws Administratr Rights Free Disk Space 250 MB (Cnfiguratin Manager, V-SDK) 6 BOSCH and the symbl are registered trademarks f Rbert Bsch GmbH, Germany

7 Frm Prduct Management Telephne Nuremberg Bsch Vide Client BVC is required t replay data exprted via the VRM exprt Wizard. System requirements fr BVC are: Hardware Wrkstatin Operating System Windws XP (Service Pack 2 r higher) r Windws 7 (32 bits and 64 bits), Windws 8 CPU Intel Pentium DualCre, 3.0 GHz r cmparable RAM Min. 4 GB Graphic Card NVIDIA GeFrce 8600 r higher Ethernet Card 100/1000-BaseT Sftware DirectX 9.0c Installatin Windws Administratr Rights Free Disk Space 10 GB VRM exprt Wizard The VRM exprt Wizard fr disk- and tape-based backup is a stand-alne applicatin. The recmmended OS platfrms are Windws 7, 64-bit Windws Server 2008 R2 Tape backup is nt supprted n Windws XP Windws Server 2003 exprt Restrictins If verall backup time is lnger then the respective retentin time fr a camera nt all vide data might be exprted befre being verwritten/deleted. If the iscsi Exprt ptin is used n Windws XP r Windws Server 2003 platfrms the Micrsft iscsi Initiatr must be installed manually. The latest versin f the MS iscsi Initiatr is available frm the Micrsft hme page ( Cmpnent Versins Vide Streaming Gateway Transcder VideSDK Micrsft.Net Framewrk BOSCH and the symbl are registered trademarks f Rbert Bsch GmbH, Germany

8 Frm Prduct Management Telephne Nuremberg 8. Histry 1. VRM New Features Supprt f Bsch HD cameras (running Firmware 4.52 r higher) Supprt fr basic setup f the new DLA Series DSA Series Supprt fr iscsi Initiatr wildcards in VRM Cnfiguratr (NetApp Ontap versin required fr the DSA Series) Supprt f Spare Disks fr DSA Series in VRM Cnfiguratr 1.2. Bug Fixes Lad Balancing: VRM nw plans nly fr <n> days int the future. Thus, large span lists which wuld last fr a very lng time due t lw bandwidth requirements are avided. The VRM nw distributes fr the next <n> days. The default value is <n=4>, and can be changed by the Cnfiguratin Manager. Nte: The planning ahead fr <n> days is based n statistical data VRM Server is cllecting during peratins. Therefre, <n> is always the maximum duratin and culd be shrter depending n the individual bandwidth f the recrding devices, especially during the initial setup f a VRM Server installatin. Retentin Time Change f retentin time during peratin is handled crrectly. Prblem fixed when recrding n cam lg Blck Delete: Blcks deleted either manually r due t maximum retentin time, are crrectly remved frm the active system. Camera Inf Web Page: Used Strage infrmatin shwn crrectly. Timeline: reliable Timeline update in BVMS Operatr Client Perfrmance Optimizatin Perfrmance ptimized in alarm recrding mde. End f supprt fr VSDK v4.27 based applicatins due t this perfrmance ptimizatin Generic.dll: bug fix fr threading prblems which caused crashes f the VRM Server due t netwrk prblems SNMP Traps: SNMP trap is created fr each iscsi target if it runs ut f strage. If remaining free capacity is 10% r less a warning message is sent and resent every hur as lng as the free capacity remains belw the threshld. iscsi Discvery: bug fix fr prblem when the initial iscsi discvery is running at the same a VRM frmatting f LUNs is executed DHCP Handling: Cnfiguratin Manager must nt delete an IP address if the same MAC address is fund with anther IP address (DHCP handling). Furthermre, it is nt pssible t change the IP address f a device with the VRM Cnfiguratr (netwrk tab and cntext menu). The IP address has t be changed with the CM, while the VRM Cnfiguratr is nt cnnected t the VRM. Backup server state: VRM Mnitr shws if this server is master r backup server Fixed: Live nly user culd d a replay Fixed: If recrding is stpped with a Remunt Intended (FW 4.20 r higher) in the system verview the number f active recrding was nt decremented Fixed: VRM Mnitr bitrate graph n the verview page f the VRM Mnitr smetimes shwed bitrate 0kbps althugh cameras and targets shwed a nn-zer bitrate Fixed: Renaming f cameras in VRM Cnfiguratr 8 BOSCH and the symbl are registered trademarks f Rbert Bsch GmbH, Germany

9 Frm Prduct Management Telephne Nuremberg 2. VRM New Features Lad Balancing New All Mde : Autmatic Mde: All mde with autmatic assignment withut explicit cnfiguratin where a max f 2 iscsi targets per iscsi hst (BVIP mdule) are assigned Dual Recrding capability In this first implementatin Dual Recrding is restricted fr large prjects nly and nt supprted as a standard feature VRM Cnfiguratr enhancements VRM Cnfiguratr and CnfigManager will be cnslidated in ne cnfiguratin utility thus prviding a hmgenus feature set. Enhancements f VRM Mnitr Infrmatin n Prtected Recrding The VRM Mnitr web page will have a link t an additinal web page with infrmatin abut camera name, IP address and amunt f prtected recrdings fr each camera UI Enhancements The summary and enlarged bitrate graphs will have the title recrding statistics n tp All bitrate values are available fr the last three mnths as a CSV file. The CSV file cntains multiple clumns, with the date, the bitrate value fr each camera, and the bitrate value fr each target. The VRM saves the data fr the CSV files in a binary file frmat. The CSV file is created n demand and the user can specify which time interval he wants t see in the CSV file. The selectin is dne via the VRM Mnitr interface. Device Time Mnitring VRM is mnitring the lcal time f each BVIP device: at a time difference f mre than 10s the VRM generates a SNMP trap and a lg entry. Fr BVIP devices with a time server cnfigured, VRM des nt change the time but a SNMP trap and a lg entry are created. Increase number f replay sessins The number f cncurrent VRM replay sessins will be dubled: Alarm Recrding Imprved pre-alarm recrding handling 2.2. Bug Fixes Bsch Vide Client v1.2 included in the VRM Master Installer Fine tuning f lg messages fr lad balancing Size f exprt data calculated crrectly Online Help is available fr VRM Mnitr Netwrk scan was nt wrking, if license was expired VRM server installer is signed by a certificate VRM Mnitr is ready fr IE9 Fixed: failver server des nt recgnize cnfiguratin changes https: nly with replaced rcpp.dll (encryptin enabled rcpp.dll) 9 BOSCH and the symbl are registered trademarks f Rbert Bsch GmbH, Germany

10 Frm Prduct Management Telephne Nuremberg 3. VRM New Features Disk-based backup f VRM vide data Recrded data may be stred n file system based target. The playback f exprted data is pssible withut a VRM envirnment. In this first versin supprted by Archive Player nly. Tape-based backup f VRM vide data Recrded data may be stred n tape target platfrm (Tape Library). In the first implementatin nly the Backup Sftware NetBackup is natively supprted. The Backup sftware is nt part f the VRM package. It must be installed and cnfigured separately. VRM exprt Wizard GUI based wizard t easy exprt data t disk- r tape-based targets 3.2. Bug Fixes (Build 0017) Fixed: VRM Server crash (ut f memry) if BVIP device is in restricted mde with n valid strage targets and device is ffline Fixed: N VRM TCP replay frm cameras with track id ends with 0x00 Fixed: ptential crash n shutdwn while requesting mnitr pages Fixed: SNMP Mnitring f ISCSI Devices - iscsi targets are detected ffline if SNMP and iscsi Mnitring bth indicate an errr Changed: default value fr secndary span allcatin is set t 8 (prir 64) t minimize verhead Changed: Equal lad distributin ver several LUNs within ne iscsi target Changed: VRM Mnitr Reprting Printut with CSV Exprts fr Recrded data per day Recrded minutes per day (Build 0027) VRM Upgrade: VRM Installer checks if mre than 120 iscsi targets are cnfigured and abrts upgrade installatin VRM Upgrade: when upgrading frm VRM versins < 2.20 the installer will reprt if the cpy prcess f the respective cnfig.xml has failed; a backup cpy f the cnfig.xml will be created befre upgrading Time selectin disabled fr exprt f stred data and recrding duratin data Bitrate statistics graph n VRM Mnitr page is nw labelled with mre than ne value Fixed: JPEG snapsht supprts BVIP firmware 5.50 Fixed: Bitrate exprt with wrng values if bitrate > 35 Mbit/s Fixed: datasize search wrng if pre- and pst-alarm are verlapping Fixed: Replay issue in exprt if blcks are verwritten during exprt Changed: Send immediately a blck list t a device after it is added 4. VRM New Features Vide Streaming Gateway 4.2. Bug Fixes 10 BOSCH and the symbl are registered trademarks f Rbert Bsch GmbH, Germany

11 Frm Prduct Management Telephne Nuremberg Changed: Registry Key MaxSpanAllcatin nw refers t ne line nt per device. This key must be manually checked and adjusted if necessary Changed: Vide Lss is signalled via SNMP trap fr VSG and Encders: Changed: Prtected blcks can be shwn n extra page f VRM mnitr Changed: If lg files exceed 100MB limit they are split and all parts are cllected by using the exprt functin f VRM mnitr Changed: default retentin time fr lggings is changed frm infinite t 30 days Changed: Track list rcp+ respnse returns always the cmplete URL instead f nly IP address (imprtant fr custmers that are using nn Bsch replay clients) 5. VRM New Features The main fcus f VRM 2.30 is the supprt f the new DSA E-Series iscsi disk arrays: DSA-N2E6X2-08AT DSA E-Series Base Unit 8x 2TB DSA-N2E6X2-12AT DSA E-Series Base Unit 12x 2TB DSX-N1D6X2-12AT DSA E-Series Expansin Unit 12x 2TB Detailed infrmatin n the new DSA E-Series can be fund n the Bsch web site (Vide > Digital Recrding and Strage > Disk Arrays (Netwrk Attached) 5.2. Bug Fixes The fllwing changes / bug fixes are available with the VRM 2.30 versin: Added: Supprt f BVIP Firmware 4.15, 4.25 and 5.52 Changed: E-Series drives are nt supprted by FW versins ther than 4.15, 4.25 and 5.52, i.e. fr a BVIP camera with a firmware earlier than 5.52 VRM will nt assign blcks. This safety feature will nly wrk if an E-Series disk array is added as type E- Series. It des nt wrk if it is added as type "Other". BVIP devices with FW 2.53 have t be integrated via the Vide Streaming Gateway if used with E-Series. Changed: VSG supprts DSA E-Series Fixed: VRM crashes if restre data base ptin is enabled Fixed: Prtect f VSG recrding results in recrding lss f the prtected range Fixed: Exprt f a backup track is black (exprt t Backup LUN nly) 6. VRM New Features (Build 0042) supprt f the high-density DSA E-Series: DSA-N2C6X2-12AT DSA E-Series Base Unit Dual Cntrller 12x 2TB DSX-N6D6X3-60AT DSA E-Series High Density Expansin Unit 60x 3TB Dynamic Transcding Supprt Integrated Transcding management fr internal and external Bsch transcding devices Transcded replay via VRM mnitr pssible (nn transcded replay nt pssible anymre) Lad Balancing Imprvements Cnfigurable strage pls fr easy pling f iscsi targets in ne VRM envirnment Each strage pls wrks separately based n the assigned lad balancing prperties and the assigned BVIP devices 11 BOSCH and the symbl are registered trademarks f Rbert Bsch GmbH, Germany

12 Frm Prduct Management Telephne Nuremberg Switch t activate r deactivate the usage f a failver target. Default setting fr new installatins is ff, since a failver target is needed nly if VRM Server and ne iscsi target fail at the same time. (Build 0073) Autprtect n Alarm fr Bsch VMS systems 6.2. Bug Fixes (Build 0042) Change: ANR (Autmated Netwrk Replenishment) is nt supprted anymre in VRM 3.0 Change: Backups t internal Backup LUNs is nt supprted anymre. Exprts / Backups supprted by VRM exprt Wizard nly. Change: The histrical Recrding Mdes All, Restricted r Preferred Mde are nt supprted anymre. When updating existent installatins the histrical Recrding Mdes will be migrated autmatically: All mde will be migrated t Autmatic mde, Restricted and Preferred mdes t Failver mde Change: If a camera is deleted frm VRM, the blcks assigned t this camera are nt deleted anymre as in previus versins. The blcks are preserved until their minimum retentin time has expired unless they are already deleted manually. Change: Dynamic span list length allcatin Change: Failver VRM stres a cpy f the riginal XML f the master VRM. If the master VRM dies, the cnfiguratin can be retrieved frm the Failver VRM t set up a new master VRM Change: ONVIF-SDK 1.30 integrated in Vide Streaming Gateway fr perfrmance imprvements Change: If there is n time server n the devices the VRM sets its IP address as time server (which is enabled by default n Win Server 2008 R2) Change: updated Japanese Language file Fixed: if an iscsi target unmunt actin during an Exprt Jb was cancelled by user interactin this caused remaining munts t this target Fixed: The free capacity needed fr exprt shwn was labelled as number f blcks instead f value in GB. Crrected: In GUI dialgs lcal disk is used instead f LUN Crrected: estimated time is crrected and nly the IP address is written t the Lgfile instead f the cmplete URL Crrected: Due t gettracklist changes in VRM 2.22 the exprt Wizard was updated Crrected: Delete blck frm spaninflist if it is/was verwritten and exprt Wizard is currently exprting frm this target Length f username and passwrd is max. 32 characters (Build 0047) Fixed: Crash f VRM service if t many SNMP requests are sent in parallel crash nly ccurred with FW versin lder than 5.50 and mre than 64 simultaneus SNMP requests Fixed: Ptential deadlck in cmbinatin with hardware Transcder bandwidth check (USB Transcder versin nt affected) Fixed: Clearing f lck header prblem Fixed: Time server in VRM, VSG, r USB Transcder unexpectedly active if Windw Time Server nt running r nt available Changed: Online help f VRM updated 12 BOSCH and the symbl are registered trademarks f Rbert Bsch GmbH, Germany

13 Frm Prduct Management Telephne Nuremberg Changed: Remved unnecessary and nt useful VRM lgbk entries Changed: Supprted Transcder (USB versin nly) sftware newer than (Build 0048) Fixed: Cntinuus slices were errneusly marked as alarm slices which culd result in ptential recrding gaps. (Build 0064) Fixed: Negative values fr bitrates were errneusly cnsidered fr calculatin Fixed: When deleting a blck, minimum retentin time is set t 0. Otherweise devices might nt be able t use this blck again. Changed: Netwrk-scan with multiple netwrk-adapters imprved Fixed: Discvery did nt start when device is nly partly reachable Fixed: requesting prts ver HTTP/HTTPS returned an errr, when VRM is unlicensed Changed: blck-assignment imprved (Build 0073) Fixed: recrding blcks that nly cntain pre-alarm recrdings were never deleted by VRM and culd nly be reused by device after expiratin f minimum retentin time. Fixed: VSG culd be set t invalid mde - lcal recrding. Fixed: Pl setting changes via Bsch VMS Cnfiguatin Client were ignred by VRM. This culd lead t secndary target nt being used. Fixed: Discvery did nt start when device FW versin culd nt be retrieved. Fixed: DST switch may cause issues during playback. (Build 0075) Fixed: in sme cases initial discvery did nt finish resulting in cameras nt recrding 7. VRM New Features (Build 0022) The fcus f VRM 3.20 is 1. Redesign and rewrk f the web-based mnitring-capabilities. Supprted brwsers: Ggle Chrme 30 r higher; Mzilla Firefx 25 r higher; Internet Explrer 10 r higher; Safari 7 r higher; 2. Restrict is nw pssible n a blck basis if supprted by client. Replay f Vide marked as restricted will be limited t certain users nly. Autprtect is nw pssible n a blckbasis if supprted by client. Vide can be prtected against deletin after minimum retentin time perid. 3. Supprt f changing IP-addresses f BVIP cameras/encders and VRM-system (e. g. in DHCP-managed Netwrks). This is valid fr BVIP devices with firmware 5.60 r higher. 4. VideStreamingGateway can nw handle M-JPEG Bug Fixes (Build 0042) Changed: Re-phrased lg-messages t be mre understandable Changed: default lgging prvides mre infrmatin fr supprt 13 BOSCH and the symbl are registered trademarks f Rbert Bsch GmbH, Germany

14 Frm Prduct Management Telephne Nuremberg Changed: Lad-Balancing Limits are ignred if a single recrding target is used (Build 0026) Fixed: Enable autmatic licensing fr Genetec s Security Center vide management system. 8. VRM New Features (Build 0038) Transcder in DIVAR IP 6000 rev. 2 is supprted Blck cnsumptin mnitring: Camera with exceptinal high blck-usage are excluded t prevent system verlading 8.2. Bug Fixes (Build 0038) Fixed: Unused channels f an multichannel encder are n lnger taken int cnsideratin fr frecast calculatin Fixed: PTZ cntrl f Bsch Autdmes cnnected t VSG 9. VRM ) Maintenance Release with n new features 9.1. Bug Fixes (Build 0057) Fixed: VSG and TimeZnes with UTC- causes VSG t use wrng date 10. VRM New Features (Build 0010) Authenticity check n recrdings Internal prt-frwarding extended t 128 channels 14 BOSCH and the symbl are registered trademarks f Rbert Bsch GmbH, Germany